component
74LVC1G17GM-Q100X
Public Made by Adomby adom
Nexperia Buffers, Drivers, Receivers, Transceivers, XSON-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74LVC1G17GM-Q100X
Nexperia · Buffers, Drivers, Receivers, Transceivers · XSON-6(1x1.5)
74LVC1G17GM-Q100X from Nexperia, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | n.c. | unconnected | Not connected. |
| 2 | A | input | Data input; overvoltage tolerant to 5.5 V, with a recommended input voltage range of 0 V to 5.5 V. |
| 3 | GND | power_in | Ground (0 V). |
| 4 | Y | output | Data output; in active mode VO is limited to -0.5 V to VCC + 0.5 V, and output current is limited to ±50 mA. |
| 5 | n.c. | unconnected | Not connected. |
| 6 | VCC | power_in | Supply voltage; recommended range 1.65 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | XSON-6(1x1.5) |
| Category | Logic |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage (absolute maximum) | VCC | -0.5 | 6.5 | V | 3 | ||
| input clamping current | IIK | -50 | mA | VI < 0 V | 3 | ||
| input voltage (absolute maximum) | VI | -0.5 | 6.5 | V | 3 | ||
| output clamping current | IOK | -50 | 50 | mA | VO > VCC or VO < 0 V | 3 | |
| output voltage (absolute maximum, active mode) | VO | -0.5 | V | Active mode | 3 | ||
| output voltage (absolute maximum, power-down mode) | VO | -0.5 | 6.5 | V | Power-down mode; VCC = 0 V | 3 | |
| output current | IO | -50 | 50 | mA | VO = 0 V to VCC | 3 | |
| supply current (absolute maximum) | ICC | 100 | mA | 3 | |||
| ground current | IGND | -100 | mA | 3 | |||
| storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| total power dissipation (SOT886 XSON6) | Ptot | 250 | mW | Tamb = -40 °C to +125 °C; SOT886 (XSON6) | 3 | ||
| supply voltage (recommended operating) | VCC | 1.65 | 5.5 | V | 3 | ||
| input voltage (recommended operating) | VI | 0 | 5.5 | V | 3 | ||
| output voltage (recommended operating, active mode) | VO | 0 | V | Active mode | 3 | ||
| output voltage (recommended operating, power-down mode) | VO | 0 | 5.5 | V | Power-down mode; VCC = 0 V | 3 | |
| ambient temperature | Tamb | -40 | 125 | °C | 3 | ||
| HIGH-level output voltage | VOH | 0.95 | V | Tamb = -40 °C to +125 °C; IO = -4 mA; VCC = 1.65 V | 4 | ||
| HIGH-level output voltage | VOH | 1.7 | V | Tamb = -40 °C to +125 °C; IO = -8 mA; VCC = 2.3 V | 4 | ||
| HIGH-level output voltage | VOH | 1.9 | V | Tamb = -40 °C to +125 °C; IO = -12 mA; VCC = 2.7 V | 4 | ||
| HIGH-level output voltage | VOH | 2 | V | Tamb = -40 °C to +125 °C; IO = -24 mA; VCC = 3.0 V | 4 | ||
| HIGH-level output voltage | VOH | 3.4 | V | Tamb = -40 °C to +125 °C; IO = -32 mA; VCC = 4.5 V | 4 | ||
| LOW-level output voltage | VOL | 0.1 | V | Tamb = -40 °C to +125 °C; VI = VT+ or VT-; IO = 100 μA; VCC = 1.65 V to 5.5 V | 4 | ||
| LOW-level output voltage | VOL | 0.7 | V | Tamb = -40 °C to +125 °C; IO = 4 mA; VCC = 1.65 V | 4 | ||
| LOW-level output voltage | VOL | 0.45 | V | Tamb = -40 °C to +125 °C; IO = 8 mA; VCC = 2.3 V | 4 | ||
| LOW-level output voltage | VOL | 0.6 | V | Tamb = -40 °C to +125 °C; IO = 12 mA; VCC = 2.7 V | 4 | ||
| LOW-level output voltage | VOL | 0.8 | V | Tamb = -40 °C to +125 °C; IO = 24 mA; VCC = 3.0 V | 4 | ||
| input leakage current | II | -1 | 1 | μA | Tamb = -40 °C to +125 °C; VI = 5.5 V or GND; VCC = 0 V to 5.5 V | 5 | |
| power-off leakage current | IOFF | -2 | 2 | μA | Tamb = -40 °C to +125 °C; VI or VO = 5.5 V; VCC = 0 V | 5 | |
| supply current | ICC | 4 | μA | Tamb = -40 °C to +125 °C; VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A | 5 | ||
| additional supply current per pin | ΔICC | 500 | μA | Tamb = -40 °C to +125 °C; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V | 5 | ||
| positive-going threshold voltage | VT+ | 0.79 | 1.14 | V | Tamb = -40 °C to +125 °C; VCC = 1.8 V; see Fig. 6 and Fig. 7 | 5 | |
| positive-going threshold voltage | VT+ | 1 | 1.4 | V | Tamb = -40 °C to +125 °C; VCC = 2.3 V; see Fig. 6 and Fig. 7 | 5 | |
| positive-going threshold voltage | VT+ | 1.26 | 1.71 | V | Tamb = -40 °C to +125 °C; VCC = 3.0 V; see Fig. 6 and Fig. 7 | 5 | |
| positive-going threshold voltage | VT+ | 1.81 | 2.36 | V | Tamb = -40 °C to +125 °C; VCC = 4.5 V; see Fig. 6 and Fig. 7 | 5 | |
| positive-going threshold voltage | VT+ | 2.16 | 2.79 | V | Tamb = -40 °C to +125 °C; VCC = 5.5 V; see Fig. 6 and Fig. 7 | 5 | |
| negative-going threshold voltage | VT- | 0.46 | 0.78 | V | Tamb = -40 °C to +125 °C; VCC = 1.8 V; see Fig. 6 and Fig. 7 | 5 | |
| negative-going threshold voltage | VT- | 0.65 | 0.99 | V | Tamb = -40 °C to +125 °C; VCC = 2.3 V; see Fig. 6 and Fig. 7 | 5 | |
| negative-going threshold voltage | VT- | 0.88 | 1.27 | V | Tamb = -40 °C to +125 °C; VCC = 3.0 V; see Fig. 6 and Fig. 7 | 5 | |
| negative-going threshold voltage | VT- | 1.32 | 1.87 | V | Tamb = -40 °C to +125 °C; VCC = 4.5 V; see Fig. 6 and Fig. 7 | 5 | |
| negative-going threshold voltage | VT- | 1.58 | 2.27 | V | Tamb = -40 °C to +125 °C; VCC = 5.5 V; see Fig. 6 and Fig. 7 | 5 | |
| hysteresis voltage | VH | 0.19 | 0.51 | V | Tamb = -40 °C to +125 °C; VCC = 1.8 V; see Fig. 6, Fig. 7 and Fig. 8 | 5 | |
| hysteresis voltage | VH | 0.22 | 0.57 | V | Tamb = -40 °C to +125 °C; VCC = 2.3 V; see Fig. 6, Fig. 7 and Fig. 8 | 5 | |
| hysteresis voltage | VH | 0.25 | 0.64 | V | Tamb = -40 °C to +125 °C; VCC = 3.0 V; see Fig. 6, Fig. 7 and Fig. 8 | 5 | |
| hysteresis voltage | VH | 0.34 | 0.77 | V | Tamb = -40 °C to +125 °C; VCC = 4.5 V; see Fig. 6, Fig. 7 and Fig. 8 | 5 | |
| hysteresis voltage | VH | 0.41 | 0.88 | V | Tamb = -40 °C to +125 °C; VCC = 5.5 V; see Fig. 6, Fig. 7 and Fig. 8 | 5 | |
| propagation delay A to Y | tpd | 1 | 14 | ns | Tamb = -40 °C to +125 °C; A to Y; see Fig. 9; VCC = 1.65 V to 1.95 V | 7 | |
| propagation delay A to Y | tpd | 0.7 | 8.5 | ns | Tamb = -40 °C to +125 °C; A to Y; see Fig. 9; VCC = 2.3 V to 2.7 V | 7 | |
| propagation delay A to Y | tpd | 0.7 | 7 | ns | Tamb = -40 °C to +125 °C; A to Y; see Fig. 9; VCC = 3.0 V to 3.6 V | 7 | |
| propagation delay A to Y | tpd | 0.7 | 6.5 | ns | Tamb = -40 °C to +125 °C; A to Y; see Fig. 9; VCC = 4.5 V to 5.5 V | 7 | |
| power dissipation capacitance | CPD | 16.6 | pF | VI = GND to VCC; VCC = 3.3 V | 7 | ||
| input capacitance | CI | 5 | pF | Tamb = -40 °C to +85 °C | 4 |
CAD (KiCad official)
- Symbol:
74LVC1G17GM-Q100X - Footprint:
Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD - 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
- 3D model files:
74lvc1g17gm-q100x-etched.step/74lvc1g17gm-q100x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lvc1g17gm-q100x.step/74lvc1g17gm-q100x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (14 pp, sha256
4e34623b73f01f3f, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).