Generated by kicad-footprint-generator · KiCad file format 20260206
74LVC1G07W5-7
Diodes Incorporated · Buffers / Drivers · SOT-25
74LVC1G07W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | A | input | Data input, tolerant to 5.5V; unused inputs should be held at VCC or ground. |
| 3 | GND | power_in | Ground. |
| 4 | Y | output | Open-drain data output (high-impedance when A is high, low when A is low) with a maximum sink current of 32mA. |
| 5 | VCC | power_in | Supply voltage, 1.65V to 5.5V operating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Logic ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| ESD Human Body Model protection | ESD HBM | 2 | kV | 2 | |||
| ESD Charged Device Model protection | ESD CDM | 1 | kV | 2 | |||
| Supply voltage range | VCC | -0.5 | 6.5 | V | 2 | ||
| Input voltage range | VI | -0.5 | 6.5 | V | 2 | ||
| Voltage applied to output in high impedance or IOFF state | VO | -0.5 | 6.5 | V | High-impedance or IOFF state | 2 | |
| Voltage applied to output in high or low state | VO | -0.5 | 6.5 | V | High or low state | 2 | |
| Input clamp current | IIK | -50 | mA | VI < 0 | 2 | ||
| Output clamp current | IOK | -50 | mA | 2 | |||
| Continuous output current | IO | 50 | mA | 2 | |||
| Continuous current through VCC or GND | ICC, IGN | -100 | 100 | mA | 2 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| Operating voltage | VCC | 1.65 | 5.5 | V | Operating | 3 | |
| Data retention voltage | VCC | 1.5 | V | Data retention only | 3 | ||
| Input voltage | VI | 0 | 5.5 | V | 3 | ||
| Output voltage | VO | 0 | 5.5 | V | 3 | ||
| High-level input voltage | VIH | 1.7 | V | VCC = 2.3V to 2.7V | 3 | ||
| High-level input voltage | VIH | 2 | V | VCC = 3V to 3.6V | 3 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC = 2.3V to 2.7V | 3 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 3V to 3.6V | 3 | ||
| Low-level output current | IOL | 4 | mA | VCC = 1.65V | 3 | ||
| Low-level output current | IOL | 8 | mA | VCC = 2.3V | 3 | ||
| Low-level output current | IOL | 12 | mA | VCC = 2.7V | 3 | ||
| Low-level output current | IOL | 16 | mA | VCC = 3V | 3 | ||
| Low-level output current | IOL | 24 | mA | 3 | |||
| Low-level output current | IOL | 32 | mA | VCC = 4.5V | 3 | ||
| Input transition rise or fall rate | Δt/ΔV | 20 | ns/V | VCC = 1.8V ± 0.15V, 2.5V ± 0.2V | 3 | ||
| Input transition rise or fall rate | Δt/ΔV | 10 | ns/V | VCC = 3.3V ± 0.3V | 3 | ||
| Input transition rise or fall rate | Δt/ΔV | 5 | ns/V | VCC = 5V ± 0.5V | 3 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 3 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 100μA; VCC = 1.65V to 5.5V; TA = -40°C to +125°C | 4 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 4mA; VCC = 1.65V; TA = -40°C to +125°C | 4 | ||
| Low-level output voltage | VOL | 0.3 | V | IOL = 8mA; VCC = 2.3V; TA = -40°C to +125°C | 4 | ||
| Low-level output voltage | VOL | 0.6 | V | IOL = 12mA; VCC = 2.7V; TA = -40°C to +125°C | 4 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 16mA; VCC = 3V; TA = -40°C to +125°C | 4 | ||
| Low-level output voltage | VOL | 0.55 | V | IOL = 24mA; TA = -40°C to +125°C | 4 | ||
| Input current | II | -5 | 5 | μA | VI = 5.5V or GND; VCC = 0 to 5.5V; TA = -40°C to +125°C | 4 | |
| Power down leakage current | IOFF | -10 | 10 | μA | VI or VO = 5.5V; VCC = 0V; TA = -40°C to +125°C | 4 | |
| Supply current | ICC | 10 | μA | VI = 5.5V or GND; IO = 0; VCC = 5.5V; TA = -40°C to +125°C | 4 | ||
| Additional supply current | ΔICC | 500 | μA | Input at VCC, 0.6V; VCC = 3V to 5.5V; TA = -40°C to +125°C | 4 | ||
| Propagation delay A or B to Y | tPD | 1 | 3 | 6.5 | ns | VCC = 1.8V ± 0.15V; TA = -40°C to +85°C | 5 |
| Propagation delay A or B to Y | tPD | 0.5 | 1.9 | 4 | ns | VCC = 2.5V ± 0.2V; TA = -40°C to +85°C | 5 |
| Propagation delay A or B to Y | tPD | 0.5 | 2.5 | 4.5 | ns | VCC = 2.7V; TA = -40°C to +85°C | 5 |
| Propagation delay A or B to Y | tPD | 0.5 | 2.3 | 4 | ns | VCC = 3.3V ± 0.3V; TA = -40°C to +85°C | 5 |
| Propagation delay A or B to Y | tPD | 0.5 | 1.7 | 3 | ns | VCC = 5.0V ± 0.5V; TA = -40°C to +85°C | 5 |
| Propagation delay A or B to Y | tPD | 1 | 8.5 | ns | VCC = 1.8V ± 0.15V; TA = -40°C to +125°C | 5 | |
| Propagation delay A or B to Y | tPD | 0.5 | 5.5 | ns | VCC = 2.5V ± 0.2V; TA = -40°C to +125°C | 5 | |
| Propagation delay A or B to Y | tPD | 0.5 | 6 | ns | VCC = 2.7V; TA = -40°C to +125°C | 5 | |
| Propagation delay A or B to Y | tPD | 0.5 | 4 | ns | VCC = 5.0V ± 0.5V; TA = -40°C to +125°C | 5 | |
| Thermal resistance junction-to-ambient (SOT25) | θJA | 204 | °C/W | Note 7: device mounted on FR-4 PCB, 2oz copper, minimum recommended pad layout | 4 | ||
| Thermal resistance junction-to-case (SOT25) | θJC | 52 | °C/W | Note 7: device mounted on FR-4 PCB, 2oz copper, minimum recommended pad layout | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish - Mate Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: 0.016 grams (Approximate) | 16 |
CAD (KiCad official)
- Symbol:
74LVC1G07W5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
74lvc1g07w5-7-etched.step/74lvc1g07w5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lvc1g07w5-7.step/74lvc1g07w5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
217ed936f16ac68b, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).