component
74HCT74PW-Q100
Public Made by Adomby adom
Nexperia Flip Flops, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
74HCT74PW-Q100
Nexperia · Flip Flops · TSSOP-14
74HCT74PW-Q100 from Nexperia, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1RD | input | Asynchronous reset-direct input, active LOW. |
| 2 | 1D | input | Data input for flip-flop 1; it is stored on the LOW-to-HIGH clock transition when set-up and hold times are met. |
| 3 | 1CP | input | Clock input, edge-triggered on the LOW-to-HIGH transition; Schmitt-trigger action tolerates slow clock rise and fall times. |
| 4 | 1SD | input | Asynchronous set-direct input, active LOW. |
| 5 | 1Q | output | Flip-flop 1 true output. |
| 6 | 1Q̄ | output | Flip-flop 1 complement output. |
| 7 | GND | power_in | Ground (0 V). |
| 8 | 2Q̄ | output | Flip-flop 2 complement output. |
| 9 | 2Q | output | Flip-flop 2 true output. |
| 10 | 2SD | input | Asynchronous set-direct input, active LOW. |
| 11 | 2CP | input | Clock input, edge-triggered on the LOW-to-HIGH transition; Schmitt-trigger action tolerates slow clock rise and fall times. |
| 12 | 2D | input | Data input for flip-flop 2; it is stored on the LOW-to-HIGH clock transition when set-up and hold times are met. |
| 13 | 2RD | input | Asynchronous reset-direct input, active LOW. |
| 14 | VCC | power_in | Supply voltage; Table 6 gives 2.0 V to 6.0 V for 74HC74-Q100 and 4.5 V to 5.5 V for 74HCT74-Q100. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-14 |
| Category | Logic ICs |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input transition rise and fall rate | Δt/ΔV | 1.67 | 139 | ns/V | VCC = 4.5 V | 5 | |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 74HCT74-Q100 | 5 |
| Input voltage | VI | 0 | V | max printed as VCC | 5 | ||
| Output voltage | VO | 0 | V | max printed as VCC | 5 | ||
| Ambient temperature | Tamb | -40 | 25 | 125 | °C | 5 | |
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input clamping current | IIK | -20 | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 | |
| Output clamping current | IOK | -20 | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 | |
| Output current | IO | -25 | 25 | mA | VO = -0.5 V to (VCC + 0.5 V) | 4 | |
| Supply current | ICC | 100 | mA | 4 | |||
| Ground current | IGND | -100 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C; SOT402-1 (TSSOP14) | 4 | ||
| HIGH-level input voltage | VIH | 2 | 1.6 | V | VCC = 4.5 V to 5.5 V; -40 °C to +125 °C | 6 | |
| LOW-level input voltage | VIL | 1.2 | 0.8 | V | VCC = 4.5 V to 5.5 V; -40 °C to +125 °C | 6 | |
| HIGH-level output voltage | VOH | 3.7 | 4.32 | V | VI = VIH or VIL; IO = -4 mA; VCC = 4.5 V; -40 °C to +125 °C | 6 | |
| LOW-level output voltage | VOL | 0.15 | 0.4 | V | VI = VIH or VIL; IO = 4.0 mA; VCC = 4.5 V; -40 °C to +125 °C | 6 | |
| Input leakage current | II | -1 | 1 | μA | VI = VCC or GND; VCC = 5.5 V; -40 °C to +125 °C | 6 | |
| Supply current | ICC | 80 | μA | VI = VCC or GND; IO = 0 A; VCC = 5.5 V; -40 °C to +125 °C | 6 | ||
| Additional supply current per input pin (nD, nRD) | ΔICC | 70 | 343 | μA | VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; -40 °C to +125 °C | 6 | |
| Additional supply current per input pin (nSD, nCP) | ΔICC | 80 | 392 | μA | VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A; -40 °C to +125 °C | 6 | |
| Propagation delay nCP to nQ, nQ | tpd | 18 | 53 | ns | VCC = 4.5 V; CL = 50 pF; see Fig. 5 | 9 | |
| Propagation delay nSD to nQ, nQ | tpd | 23 | 60 | ns | VCC = 4.5 V; CL = 50 pF; see Fig. 6 | 9 | |
| Propagation delay nRD to nQ, nQ | tpd | 24 | 60 | ns | VCC = 4.5 V; CL = 50 pF; see Fig. 6 | 9 | |
| Transition time nQ, nQ | tt | 7 | 22 | ns | VCC = 4.5 V; CL = 50 pF; see Fig. 5 | 9 | |
| Pulse width nCP HIGH or LOW | tW | 27 | 9 | ns | VCC = 4.5 V; see Fig. 5 | 9 | |
| Pulse width nSD, nRD LOW | tW | 24 | 9 | ns | VCC = 4.5 V; see Fig. 6 | 9 | |
| Recovery time nSD, nRD | trec | 9 | 1 | ns | VCC = 4.5 V; see Fig. 6 | 9 | |
| Set-up time nD to nCP | tsu | 18 | 5 | ns | VCC = 4.5 V; see Fig. 5 | 9 | |
| Hold time nD to nCP | th | 3 | -3 | ns | VCC = 4.5 V; see Fig. 5 | 9 | |
| Maximum frequency nCP | fmax | 18 | 54 | MHz | VCC = 4.5 V; see Fig. 5 | 9 |
CAD (KiCad official)
- Symbol:
74HCT74PW-Q100 - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
74hct74pw-q100-etched.step/74hct74pw-q100-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hct74pw-q100.step/74hct74pw-q100.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (18 pp, sha256
5b865b51d6a373a9, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).