component
74HCT4052D
Public Made by Adomby adom
Nexperia Analog Switches, Multiplexers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
74HCT4052D
Nexperia · Analog Switches, Multiplexers · SOIC-16
74HCT4052D from Nexperia, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 2Y0 | bidirectional | Independent input or output of switch 2 (channel 0); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 2 | 2Y2 | bidirectional | Independent input or output of switch 2 (channel 2); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 3 | 2Z | bidirectional | Common input or output of switch 2; voltages at pins nYn and nZ may not exceed VCC or VEE per the limiting values. |
| 4 | 2Y3 | bidirectional | Independent input or output of switch 2 (channel 3); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 5 | 2Y1 | bidirectional | Independent input or output of switch 2 (channel 1); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 6 | E | input | Enable input (active LOW); when HIGH all switches are turned off, and it is a digital input referenced to GND. |
| 7 | VEE | power_in | Negative supply voltage; voltages are referenced to VEE = GND (0 V) for the limiting values. |
| 8 | GND | power_in | Ground (0 V); input voltage range is GND to VCC. |
| 9 | S1 | input | Select logic input for both switches; input voltage range is GND to VCC. |
| 10 | S0 | input | Select logic input for both switches; input voltage range is GND to VCC. |
| 11 | 1Y3 | bidirectional | Independent input or output of switch 1 (channel 3); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 12 | 1Y0 | bidirectional | Independent input or output of switch 1 (channel 0); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 13 | 1Z | bidirectional | Common input or output of switch 1; voltages at pins nYn and nZ may not exceed VCC or VEE per the limiting values. |
| 14 | 1Y1 | bidirectional | Independent input or output of switch 1 (channel 1); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 15 | 1Y2 | bidirectional | Independent input or output of switch 1 (channel 2); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 16 | VCC | power_in | Positive supply voltage; VCC - GND is 4.5 V to 5.5 V for 74HCT4052 and absolute maximum is 11.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC - GND | 4.5 | 5 | 5.5 | V | see Fig. 5 and Fig. 6 | 6 |
| supply voltage | VCC - VEE | 2 | 5 | 10 | V | see Fig. 5 and Fig. 6 | 6 |
| ambient temperature | Tamb | -40 | 25 | 125 | °C | 6 | |
| input transition rise and fall rate | Δt/ΔV | 1.67 | 139 | ns/V | VCC = 4.5 V | 6 | |
| supply voltage | VCC | -0.5 | 11 | V | 6 | ||
| input clamping current | IIK | -20 | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 6 | |
| switch clamping current | ISK | -20 | 20 | mA | VSW < -0.5 V or VSW > VCC + 0.5 V | 6 | |
| switch current | ISW | -25 | 25 | mA | -0.5 V < VSW < VCC + 0.5 V | 6 | |
| supply current | IEE | -20 | 20 | mA | 6 | ||
| supply current | ICC | 50 | mA | 6 | |||
| ground current | IGND | -50 | mA | 6 | |||
| storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| power dissipation per switch | P | 100 | mW | per switch | 6 | ||
| total power dissipation | Ptot | 500 | mW | SOT109-1 (SO16 package) | 6 | ||
| ON resistance (peak) | RON(peak) | 100 | 225 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 7 | |
| ON resistance (peak) | RON(peak) | 90 | 200 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC to VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 7 | |
| ON resistance (peak) | RON(peak) | 70 | 165 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 7 | |
| ON resistance (peak) | RON(peak) | 80 | 175 | Ω | Tamb = -40 °C to +85 °C; Vis = VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 7 | |
| ON resistance (peak) | RON(peak) | 70 | 150 | Ω | Tamb = -40 °C to +85 °C; Vis = VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 7 | |
| ON resistance (peak) | RON(peak) | 60 | 130 | Ω | Tamb = -40 °C to +85 °C; Vis = VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 7 | |
| ON resistance (rail) | RON(rail) | 90 | 200 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 7 | |
| ON resistance (rail) | RON(rail) | 80 | 175 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 7 | |
| ON resistance (rail) | RON(rail) | 65 | 150 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 7 | |
| ON resistance (peak) | RON(peak) | 270 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 8 | ||
| ON resistance (peak) | RON(peak) | 240 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC to VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 8 | ||
| ON resistance (peak) | RON(peak) | 195 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 8 | ||
| ON resistance (peak) | RON(peak) | 210 | Ω | Tamb = -40 °C to +125 °C; Vis = VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 8 | ||
| ON resistance (peak) | RON(peak) | 180 | Ω | Tamb = -40 °C to +125 °C; Vis = VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 8 | ||
| ON resistance (peak) | RON(peak) | 160 | Ω | Tamb = -40 °C to +125 °C; Vis = VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 8 | ||
| ON resistance (rail) | RON(rail) | 240 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 8 | ||
| ON resistance (rail) | RON(rail) | 210 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 8 | ||
| ON resistance (rail) | RON(rail) | 180 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 8 | ||
| HIGH-level input voltage | VIH | 2 | 1.6 | V | Tamb = -40 °C to +85 °C; VCC = 4.5 V to 5.5 V | 10 | |
| LOW-level input voltage | VIL | 1.2 | 0.8 | V | Tamb = -40 °C to +85 °C; VCC = 4.5 V to 5.5 V | 10 | |
| input leakage current | II | -1 | 1 | μA | VI = VCC or GND; VCC = 5.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 10 | |
| OFF-state leakage current per channel | IS(OFF) | -1 | 1 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; per channel; Tamb = -40 °C to +85 °C | 10 | |
| OFF-state leakage current all channels | IS(OFF) | -2 | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; all channels; Tamb = -40 °C to +85 °C | 10 | |
| ON-state leakage current | IS(ON) | -2 | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; Tamb = -40 °C to +85 °C | 10 | |
| supply current | ICC | 80 | μA | VI = VCC or GND; Vis = VEE or VCC; Vos = VCC or VEE; VCC = 5.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 10 | ||
| supply current | ICC | 160 | μA | VI = VCC or GND; Vis = VEE or VCC; Vos = VCC or VEE; VCC = 5.0 V; VEE = -5.0 V; Tamb = -40 °C to +85 °C | 10 | ||
| additional supply current | ΔICC | 45 | 202.5 | μA | per input; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 10 | |
| HIGH-level input voltage | VIH | 2 | V | Tamb = -40 °C to +125 °C; VCC = 4.5 V to 5.5 V | 11 | ||
| input leakage current | II | -1 | 1 | μA | VI = VCC or GND; VCC = 5.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 11 | |
| OFF-state leakage current per channel | IS(OFF) | -1 | 1 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; per channel; Tamb = -40 °C to +125 °C | 11 | |
| OFF-state leakage current all channels | IS(OFF) | -2 | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; all channels; Tamb = -40 °C to +125 °C | 11 | |
| ON-state leakage current | IS(ON) | -2 | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; Tamb = -40 °C to +125 °C | 11 | |
| additional supply current | ΔICC | 220.5 | μA | per input; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 11 | ||
| propagation delay | tpd | 5 | 15 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 13 | |
| propagation delay | tpd | 4 | 10 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +85 °C | 13 | |
| turn-on time | ton | 41 | 88 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 13 | |
| turn-on time | ton | 28 | 60 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +85 °C | 13 | |
| turn-off time | toff | 26 | 63 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 13 | |
| turn-off time | toff | 21 | 48 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +85 °C | 13 | |
| propagation delay | tpd | 18 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 13 | ||
| propagation delay | tpd | 12 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +125 °C | 13 | ||
| turn-on time | ton | 105 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 13 | ||
| turn-on time | ton | 72 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +125 °C | 13 | ||
| turn-off time | toff | 75 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 13 | ||
| turn-off time | toff | 57 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +125 °C | 13 |
CAD (KiCad official)
- Symbol:
74HCT4052D - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
74hct4052d-etched.step/74hct4052d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hct4052d.step/74hct4052d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (25 pp, sha256
1690fa0bf0610fdc, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74HCT4052D
**Nexperia** · Analog Switches, Multiplexers · SOIC-16
74HCT4052D from Nexperia, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 2Y0 | bidirectional | Independent input or output of switch 2 (channel 0); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 2 | 2Y2 | bidirectional | Independent input or output of switch 2 (channel 2); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 3 | 2Z | bidirectional | Common input or output of switch 2; voltages at pins nYn and nZ may not exceed VCC or VEE per the limiting values. |
| 4 | 2Y3 | bidirectional | Independent input or output of switch 2 (channel 3); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 5 | 2Y1 | bidirectional | Independent input or output of switch 2 (channel 1); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 6 | E | input | Enable input (active LOW); when HIGH all switches are turned off, and it is a digital input referenced to GND. |
| 7 | VEE | power_in | Negative supply voltage; voltages are referenced to VEE = GND (0 V) for the limiting values. |
| 8 | GND | power_in | Ground (0 V); input voltage range is GND to VCC. |
| 9 | S1 | input | Select logic input for both switches; input voltage range is GND to VCC. |
| 10 | S0 | input | Select logic input for both switches; input voltage range is GND to VCC. |
| 11 | 1Y3 | bidirectional | Independent input or output of switch 1 (channel 3); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 12 | 1Y0 | bidirectional | Independent input or output of switch 1 (channel 0); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 13 | 1Z | bidirectional | Common input or output of switch 1; voltages at pins nYn and nZ may not exceed VCC or VEE per the limiting values. |
| 14 | 1Y1 | bidirectional | Independent input or output of switch 1 (channel 1); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 15 | 1Y2 | bidirectional | Independent input or output of switch 1 (channel 2); switch voltage VSW must stay within VEE to VCC per the recommended operating conditions. |
| 16 | VCC | power_in | Positive supply voltage; VCC - GND is 4.5 V to 5.5 V for 74HCT4052 and absolute maximum is 11.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC - GND | 4.5 | 5 | 5.5 | V | see Fig. 5 and Fig. 6 | 6 |
| supply voltage | VCC - VEE | 2 | 5 | 10 | V | see Fig. 5 and Fig. 6 | 6 |
| ambient temperature | Tamb | -40 | 25 | 125 | °C | | 6 |
| input transition rise and fall rate | Δt/ΔV | | 1.67 | 139 | ns/V | VCC = 4.5 V | 6 |
| supply voltage | VCC | -0.5 | | 11 | V | | 6 |
| input clamping current | IIK | -20 | | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 6 |
| switch clamping current | ISK | -20 | | 20 | mA | VSW < -0.5 V or VSW > VCC + 0.5 V | 6 |
| switch current | ISW | -25 | | 25 | mA | -0.5 V < VSW < VCC + 0.5 V | 6 |
| supply current | IEE | -20 | | 20 | mA | | 6 |
| supply current | ICC | | | 50 | mA | | 6 |
| ground current | IGND | | | -50 | mA | | 6 |
| storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| power dissipation per switch | P | | | 100 | mW | per switch | 6 |
| total power dissipation | Ptot | | | 500 | mW | SOT109-1 (SO16 package) | 6 |
| ON resistance (peak) | RON(peak) | | 100 | 225 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 7 |
| ON resistance (peak) | RON(peak) | | 90 | 200 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC to VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 7 |
| ON resistance (peak) | RON(peak) | | 70 | 165 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 7 |
| ON resistance (peak) | RON(peak) | | 80 | 175 | Ω | Tamb = -40 °C to +85 °C; Vis = VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 7 |
| ON resistance (peak) | RON(peak) | | 70 | 150 | Ω | Tamb = -40 °C to +85 °C; Vis = VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 7 |
| ON resistance (peak) | RON(peak) | | 60 | 130 | Ω | Tamb = -40 °C to +85 °C; Vis = VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 7 |
| ON resistance (rail) | RON(rail) | | 90 | 200 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 7 |
| ON resistance (rail) | RON(rail) | | 80 | 175 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 7 |
| ON resistance (rail) | RON(rail) | | 65 | 150 | Ω | Tamb = -40 °C to +85 °C; Vis = VCC; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 7 |
| ON resistance (peak) | RON(peak) | | | 270 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 8 |
| ON resistance (peak) | RON(peak) | | | 240 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC to VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 8 |
| ON resistance (peak) | RON(peak) | | | 195 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC to VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 8 |
| ON resistance (peak) | RON(peak) | | | 210 | Ω | Tamb = -40 °C to +125 °C; Vis = VEE; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 8 |
| ON resistance (peak) | RON(peak) | | | 180 | Ω | Tamb = -40 °C to +125 °C; Vis = VEE; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 8 |
| ON resistance (peak) | RON(peak) | | | 160 | Ω | Tamb = -40 °C to +125 °C; Vis = VEE; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 8 |
| ON resistance (rail) | RON(rail) | | | 240 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC; VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA | 8 |
| ON resistance (rail) | RON(rail) | | | 210 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC; VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA | 8 |
| ON resistance (rail) | RON(rail) | | | 180 | Ω | Tamb = -40 °C to +125 °C; Vis = VCC; VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA | 8 |
| HIGH-level input voltage | VIH | 2 | 1.6 | | V | Tamb = -40 °C to +85 °C; VCC = 4.5 V to 5.5 V | 10 |
| LOW-level input voltage | VIL | | 1.2 | 0.8 | V | Tamb = -40 °C to +85 °C; VCC = 4.5 V to 5.5 V | 10 |
| input leakage current | II | -1 | | 1 | μA | VI = VCC or GND; VCC = 5.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 10 |
| OFF-state leakage current per channel | IS(OFF) | -1 | | 1 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; per channel; Tamb = -40 °C to +85 °C | 10 |
| OFF-state leakage current all channels | IS(OFF) | -2 | | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; all channels; Tamb = -40 °C to +85 °C | 10 |
| ON-state leakage current | IS(ON) | -2 | | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; Tamb = -40 °C to +85 °C | 10 |
| supply current | ICC | | | 80 | μA | VI = VCC or GND; Vis = VEE or VCC; Vos = VCC or VEE; VCC = 5.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 10 |
| supply current | ICC | | | 160 | μA | VI = VCC or GND; Vis = VEE or VCC; Vos = VCC or VEE; VCC = 5.0 V; VEE = -5.0 V; Tamb = -40 °C to +85 °C | 10 |
| additional supply current | ΔICC | | 45 | 202.5 | μA | per input; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 10 |
| HIGH-level input voltage | VIH | 2 | | | V | Tamb = -40 °C to +125 °C; VCC = 4.5 V to 5.5 V | 11 |
| input leakage current | II | -1 | | 1 | μA | VI = VCC or GND; VCC = 5.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 11 |
| OFF-state leakage current per channel | IS(OFF) | -1 | | 1 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; per channel; Tamb = -40 °C to +125 °C | 11 |
| OFF-state leakage current all channels | IS(OFF) | -2 | | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; all channels; Tamb = -40 °C to +125 °C | 11 |
| ON-state leakage current | IS(ON) | -2 | | 2 | μA | VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL; /VSW/ = VCC - VEE; Tamb = -40 °C to +125 °C | 11 |
| additional supply current | ΔICC | | | 220.5 | μA | per input; VI = VCC - 2.1 V; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 11 |
| propagation delay | tpd | | 5 | 15 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 13 |
| propagation delay | tpd | | 4 | 10 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +85 °C | 13 |
| turn-on time | ton | | 41 | 88 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 13 |
| turn-on time | ton | | 28 | 60 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +85 °C | 13 |
| turn-off time | toff | | 26 | 63 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +85 °C | 13 |
| turn-off time | toff | | 21 | 48 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +85 °C | 13 |
| propagation delay | tpd | | | 18 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 13 |
| propagation delay | tpd | | | 12 | ns | Vis to Vos; RL = ∞ Ω; see Fig. 11; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +125 °C | 13 |
| turn-on time | ton | | | 105 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 13 |
| turn-on time | ton | | | 72 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +125 °C | 13 |
| turn-off time | toff | | | 75 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = 0 V; Tamb = -40 °C to +125 °C | 13 |
| turn-off time | toff | | | 57 | ns | E, Sn to Vos; RL = 1 kΩ; see Fig. 12; VCC = 4.5 V; VEE = -4.5 V; Tamb = -40 °C to +125 °C | 13 |
## CAD (KiCad official)
- Symbol: `74HCT4052D`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `74hct4052d-etched.step` / `74hct4052d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74hct4052d.step` / `74hct4052d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/74HCT4052D.pdf) (25 pp, sha256 `1690fa0bf0610fdc`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74hct4052d-datasheet.pdf)