← Commit history

Initial commit: component/74hc40103d

Ray ·c2e8c833f1 ·
2 files changed +243
README.mdadded+52
@@ -0,0 +1,52 @@+# 74HC40103D++**Nexperia** · Counters, Dividers · SOIC-16++74HC40103D from Nexperia, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CP | input | Clock input, LOW-to-HIGH edge-triggered; counter is decremented by one on each positive-going transition; minimum pulse width 33 ns at VCC = 4.5 V. |+| 2 | MR | input | Asynchronous master reset input, active LOW; when LOW asynchronously clears counter to maximum count (decimal 255) regardless of the state of any other input; minimum pulse width 25 ns at VCC = 4.5 V. |+| 3 | TE | input | Terminal enable input, active LOW; counting is inhibited when HIGH; terminal count output TC goes LOW when count reaches zero only if TE is LOW. |+| 4 | P0 | input | Jam input 0 (least significant bit of the 8-bit preset word); clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 5 | P1 | input | Jam input 1; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 6 | P2 | input | Jam input 2; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 7 | P3 | input | Jam input 3; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 8 | GND | power_in | Ground supply reference, 0 V. |+| 9 | PL | input | Asynchronous preset enable input, active LOW; when LOW asynchronously forces jam input data (P0-P7) into counter regardless of the state of PE, TE, or CP. |+| 10 | P4 | input | Jam input 4; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 11 | P5 | input | Jam input 5; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 12 | P6 | input | Jam input 6; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. (Datasheet Table 2 erroneously prints symbol as P5; pinning diagram and functional diagram confirm this is P6.) |+| 13 | P7 | input | Jam input 7 (most significant bit of the 8-bit preset word); clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. |+| 14 | TC | output | Terminal count output, active LOW; goes LOW when count reaches zero and TE is LOW, and remains LOW for one full clock period; maximum propagation delay from CP is 60 ns at VCC = 4.5 V. |+| 15 | PE | input | Synchronous preset enable input, active LOW; when LOW data at jam inputs (P0-P7) is clocked into counter on next positive-going clock transition regardless of TE state; set-up time before CP minimum 15 ns at VCC = 4.5 V. |+| 16 | VCC | power_in | Positive supply voltage; recommended operating range 2.0 V to 6.0 V; absolute maximum +7 V; quiescent ICC max 8.0 µA at VCC = 6.0 V (25 °C). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nexperia |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `74HC40103D`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `74hc40103d-etched.step` / `74hc40103d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74hc40103d.step` / `74hc40103d.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586193672228102144) (21 pp, sha256 `8f1087cf72227e26`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/74hc40103d-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "74hc40103d",+  "version": "0.1.0",+  "type": "component",+  "description": "Nexperia Counters, Dividers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "74hc40103d",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "74hc40103d.kicad_sym",+    "74hc40103d.kicad_mod",+    "74hc40103d.glb",+    "74hc40103d.step",+    "74hc40103d.lbr",+    "docs/hero.png",+    "docs/74hc40103d-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "74HC40103D",+    "manufacturer": "Nexperia",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Counters, Dividers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586193672228102144",+    "parts": {+      "symbol": "74hc40103d.kicad_sym",+      "footprint": "74hc40103d.kicad_mod",+      "model_3d": "74hc40103d-etched.glb",+      "model_3d_plain": "74hc40103d.glb",+      "model_3d_step": "74hc40103d-etched.step",+      "model_3d_step_plain": "74hc40103d.step",+      "lbr": "74hc40103d.lbr"+    },+    "distributor_links": {+      "lcsc": "C148205"+    },+    "pins": [+      {+        "number": "1",+        "name": "CP",+        "type": "input",+        "description": "Clock input, LOW-to-HIGH edge-triggered; counter is decremented by one on each positive-going transition; minimum pulse width 33 ns at VCC = 4.5 V."+      },+      {+        "number": "2",+        "name": "MR",+        "type": "input",+        "description": "Asynchronous master reset input, active LOW; when LOW asynchronously clears counter to maximum count (decimal 255) regardless of the state of any other input; minimum pulse width 25 ns at VCC = 4.5 V."+      },+      {+        "number": "3",+        "name": "TE",+        "type": "input",+        "description": "Terminal enable input, active LOW; counting is inhibited when HIGH; terminal count output TC goes LOW when count reaches zero only if TE is LOW."+      },+      {+        "number": "4",+        "name": "P0",+        "type": "input",+        "description": "Jam input 0 (least significant bit of the 8-bit preset word); clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "5",+        "name": "P1",+        "type": "input",+        "description": "Jam input 1; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "6",+        "name": "P2",+        "type": "input",+        "description": "Jam input 2; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "7",+        "name": "P3",+        "type": "input",+        "description": "Jam input 3; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground supply reference, 0 V."+      },+      {+        "number": "9",+        "name": "PL",+        "type": "input",+        "description": "Asynchronous preset enable input, active LOW; when LOW asynchronously forces jam input data (P0-P7) into counter regardless of the state of PE, TE, or CP."+      },+      {+        "number": "10",+        "name": "P4",+        "type": "input",+        "description": "Jam input 4; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "11",+        "name": "P5",+        "type": "input",+        "description": "Jam input 5; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "12",+        "name": "P6",+        "type": "input",+        "description": "Jam input 6; clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW. (Datasheet Table 2 erroneously prints symbol as P5; pinning diagram and functional diagram confirm this is P6.)"+      },+      {+        "number": "13",+        "name": "P7",+        "type": "input",+        "description": "Jam input 7 (most significant bit of the 8-bit preset word); clocked into counter on next positive-going CP when PE is LOW, or asynchronously forced in when PL is LOW."+      },+      {+        "number": "14",+        "name": "TC",+        "type": "output",+        "description": "Terminal count output, active LOW; goes LOW when count reaches zero and TE is LOW, and remains LOW for one full clock period; maximum propagation delay from CP is 60 ns at VCC = 4.5 V."+      },+      {+        "number": "15",+        "name": "PE",+        "type": "input",+        "description": "Synchronous preset enable input, active LOW; when LOW data at jam inputs (P0-P7) is clocked into counter on next positive-going clock transition regardless of TE state; set-up time before CP minimum 15 ns at VCC = 4.5 V."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage; recommended operating range 2.0 V to 6.0 V; absolute maximum +7 V; quiescent ICC max 8.0 µA at VCC = 6.0 V (25 °C)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 12 is listed in Table 2 (page 5) as 'P5 jam input 6', but should be 'P6 jam input 6' for consist"+        ],+        "pages_sent": 21,+        "cost_usd": 0.1964,+        "at": "2026-09-21T23:27:19"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586193672228102144",+        "pages": 21,+        "sha256": "8f1087cf72227e26",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file