component
74HC245PW-Q100J
Public Made by Adomby adom
Nexperia Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.2
761d5d2
74HC245PW-Q100J
Nexperia · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
74HC245PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input that sets the transfer direction between the A and B data ports, as defined in the function table (Table 3). |
| 2 | A0 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 3 | A1 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 4 | A2 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 5 | A3 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 6 | A4 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 7 | A5 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 8 | A6 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 9 | A7 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 10 | GND | power_in | Ground (0 V) reference for the device; the datasheet gives the 0 V ground reference for all voltages. |
| 11 | B7 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 12 | B6 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 13 | B5 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 14 | B4 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 15 | B3 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 16 | B2 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 17 | B1 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 18 | B0 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 19 | OE | input | Output enable input, active LOW; a HIGH forces the A and B outputs into the high-impedance OFF-state. |
| 20 | VCC | power_in | Supply voltage; the recommended range is 2.0 V to 6.0 V for 74HC245-Q100 and 4.5 V to 5.5 V for 74HCT245-Q100. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input clamping current | IIK | -20 | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 | |
| Output clamping current | IOK | -20 | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 | |
| Output current | IO | -35 | 35 | mA | -0.5 V < VO < VCC + 0.5 V | 4 | |
| Supply current | ICC | 70 | mA | 4 | |||
| Ground current | IGND | -70 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Total power dissipation | Ptot | 500 | mW | 4 | |||
| Supply voltage | VCC | 2 | 5 | 6 | V | 74HC245-Q100 column | 4 |
| Input voltage | VI | 0 | V | max printed as VCC | 4 | ||
| Output voltage | VO | 0 | V | max printed as VCC | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 625 | ns/V | VCC = 2.0 V | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 1.67 | 139 | ns/V | VCC = 4.5 V | 4 | |
| Input transition rise and fall rate | Δt/ΔV | 83 | ns/V | VCC = 6.0 V | 4 | ||
| Ambient temperature | Tamb | -40 | 25 | 125 | °C | 4 | |
| HIGH-level input voltage | VIH | 1.5 | 1.2 | V | VCC = 2.0 V; min over -40 °C to +125 °C; typ at 25 °C | 5 | |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | V | VCC = 4.5 V; min over -40 °C to +125 °C; typ at 25 °C | 5 | |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | V | VCC = 6.0 V; min over -40 °C to +125 °C; typ at 25 °C | 5 | |
| LOW-level input voltage | VIL | 0.8 | 0.5 | V | VCC = 2.0 V; max over -40 °C to +125 °C; typ at 25 °C | 5 | |
| LOW-level input voltage | VIL | 2.1 | 1.35 | V | VCC = 4.5 V; max over -40 °C to +125 °C; typ at 25 °C | 5 | |
| LOW-level input voltage | VIL | 2.8 | 1.8 | V | VCC = 6.0 V; max over -40 °C to +125 °C; typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 1.9 | 2 | V | VI = VIH or VIL; IO = -20 μA; VCC = 2.0 V | 5 | |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | V | VI = VIH or VIL; IO = -20 μA; VCC = 4.5 V | 5 | |
| HIGH-level output voltage | VOH | 5.9 | 6 | V | VI = VIH or VIL; IO = -20 μA; VCC = 6.0 V | 5 | |
| HIGH-level output voltage | VOH | 3.7 | 4.32 | V | VI = VIH or VIL; IO = -6.0 mA; VCC = 4.5 V; min over -40 °C to +125 °C | 5 | |
| HIGH-level output voltage | VOH | 5.2 | 5.81 | V | VI = VIH or VIL; IO = -7.8 mA; VCC = 6.0 V; min over -40 °C to +125 °C | 5 | |
| LOW-level output voltage | VOL | 0 | 0.1 | V | VI = VIH or VIL; IO = 20 μA; VCC = 2.0 V | 5 | |
| LOW-level output voltage | VOL | 0.15 | 0.4 | V | VI = VIH or VIL; IO = 6.0 mA; VCC = 4.5 V; max over -40 °C to +125 °C | 5 | |
| LOW-level output voltage | VOL | 0.16 | 0.4 | V | VI = VIH or VIL; IO = 7.8 mA; VCC = 6.0 V; max over -40 °C to +125 °C | 5 | |
| Input leakage current | II | -1 | 1 | μA | VI = VCC or GND; VCC = 6.0 V; over -40 °C to +125 °C | 5 | |
| OFF-state output current | IOZ | -10 | 10 | μA | VI = VIH or VIL; VCC = 6.0 V; VO = VCC or GND; over -40 °C to +125 °C | 5 | |
| Supply current | ICC | 160 | μA | VI = VCC or GND; IO = 0 A; VCC = 6.0 V; max over -40 °C to +125 °C | 5 | ||
| Propagation delay An to Bn or Bn to An | tpd | 25 | 135 | ns | VCC = 2.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 | |
| Propagation delay An to Bn or Bn to An | tpd | 9 | 27 | ns | VCC = 4.5 V; see Fig. 5; max over -40 °C to +125 °C | 7 | |
| Propagation delay An to Bn or Bn to An | tpd | 7 | 23 | ns | VCC = 6.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 | |
| Enable time OE to An or Bn | ten | 30 | 225 | ns | VCC = 2.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 | |
| Enable time OE to An or Bn | ten | 11 | 45 | ns | VCC = 4.5 V; see Fig. 6; max over -40 °C to +125 °C | 7 | |
| Enable time OE to An or Bn | ten | 9 | 38 | ns | VCC = 6.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 | |
| Disable time OE to An or Bn | tdis | 41 | 225 | ns | VCC = 2.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 | |
| Disable time OE to An or Bn | tdis | 15 | 45 | ns | VCC = 4.5 V; see Fig. 6; max over -40 °C to +125 °C | 7 | |
| Disable time OE to An or Bn | tdis | 12 | 38 | ns | VCC = 6.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 | |
| Transition time | tt | 14 | 90 | ns | VCC = 2.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 | |
| Transition time | tt | 5 | 18 | ns | VCC = 4.5 V; see Fig. 5; max over -40 °C to +125 °C | 7 | |
| Transition time | tt | 4 | 15 | ns | VCC = 6.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
74HC245PW-Q100J - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
74hc245pw-q100j-etched.step/74hc245pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hc245pw-q100j.step/74hc245pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (15 pp, sha256
d440653b1177e397, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# 74HC245PW-Q100J
**Nexperia** · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
74HC245PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input that sets the transfer direction between the A and B data ports, as defined in the function table (Table 3). |
| 2 | A0 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 3 | A1 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 4 | A2 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 5 | A3 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 6 | A4 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 7 | A5 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 8 | A6 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 9 | A7 | bidirectional | Data input/output of port A; it is high-impedance when OE is HIGH. |
| 10 | GND | power_in | Ground (0 V) reference for the device; the datasheet gives the 0 V ground reference for all voltages. |
| 11 | B7 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 12 | B6 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 13 | B5 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 14 | B4 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 15 | B3 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 16 | B2 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 17 | B1 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 18 | B0 | bidirectional | Data input/output of port B; it is high-impedance when OE is HIGH. |
| 19 | OE | input | Output enable input, active LOW; a HIGH forces the A and B outputs into the high-impedance OFF-state. |
| 20 | VCC | power_in | Supply voltage; the recommended range is 2.0 V to 6.0 V for 74HC245-Q100 and 4.5 V to 5.5 V for 74HCT245-Q100. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 7 | V | | 4 |
| Input clamping current | IIK | -20 | | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 |
| Output clamping current | IOK | -20 | | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 |
| Output current | IO | -35 | | 35 | mA | -0.5 V < VO < VCC + 0.5 V | 4 |
| Supply current | ICC | | | 70 | mA | | 4 |
| Ground current | IGND | -70 | | | mA | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Total power dissipation | Ptot | | | 500 | mW | | 4 |
| Supply voltage | VCC | 2 | 5 | 6 | V | 74HC245-Q100 column | 4 |
| Input voltage | VI | 0 | | | V | max printed as VCC | 4 |
| Output voltage | VO | 0 | | | V | max printed as VCC | 4 |
| Input transition rise and fall rate | Δt/ΔV | | | 625 | ns/V | VCC = 2.0 V | 4 |
| Input transition rise and fall rate | Δt/ΔV | | 1.67 | 139 | ns/V | VCC = 4.5 V | 4 |
| Input transition rise and fall rate | Δt/ΔV | | | 83 | ns/V | VCC = 6.0 V | 4 |
| Ambient temperature | Tamb | -40 | 25 | 125 | °C | | 4 |
| HIGH-level input voltage | VIH | 1.5 | 1.2 | | V | VCC = 2.0 V; min over -40 °C to +125 °C; typ at 25 °C | 5 |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | | V | VCC = 4.5 V; min over -40 °C to +125 °C; typ at 25 °C | 5 |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | | V | VCC = 6.0 V; min over -40 °C to +125 °C; typ at 25 °C | 5 |
| LOW-level input voltage | VIL | | 0.8 | 0.5 | V | VCC = 2.0 V; max over -40 °C to +125 °C; typ at 25 °C | 5 |
| LOW-level input voltage | VIL | | 2.1 | 1.35 | V | VCC = 4.5 V; max over -40 °C to +125 °C; typ at 25 °C | 5 |
| LOW-level input voltage | VIL | | 2.8 | 1.8 | V | VCC = 6.0 V; max over -40 °C to +125 °C; typ at 25 °C | 5 |
| HIGH-level output voltage | VOH | 1.9 | 2 | | V | VI = VIH or VIL; IO = -20 μA; VCC = 2.0 V | 5 |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | | V | VI = VIH or VIL; IO = -20 μA; VCC = 4.5 V | 5 |
| HIGH-level output voltage | VOH | 5.9 | 6 | | V | VI = VIH or VIL; IO = -20 μA; VCC = 6.0 V | 5 |
| HIGH-level output voltage | VOH | 3.7 | 4.32 | | V | VI = VIH or VIL; IO = -6.0 mA; VCC = 4.5 V; min over -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 5.2 | 5.81 | | V | VI = VIH or VIL; IO = -7.8 mA; VCC = 6.0 V; min over -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | 0 | 0.1 | V | VI = VIH or VIL; IO = 20 μA; VCC = 2.0 V | 5 |
| LOW-level output voltage | VOL | | 0.15 | 0.4 | V | VI = VIH or VIL; IO = 6.0 mA; VCC = 4.5 V; max over -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | 0.16 | 0.4 | V | VI = VIH or VIL; IO = 7.8 mA; VCC = 6.0 V; max over -40 °C to +125 °C | 5 |
| Input leakage current | II | -1 | | 1 | μA | VI = VCC or GND; VCC = 6.0 V; over -40 °C to +125 °C | 5 |
| OFF-state output current | IOZ | -10 | | 10 | μA | VI = VIH or VIL; VCC = 6.0 V; VO = VCC or GND; over -40 °C to +125 °C | 5 |
| Supply current | ICC | | | 160 | μA | VI = VCC or GND; IO = 0 A; VCC = 6.0 V; max over -40 °C to +125 °C | 5 |
| Propagation delay An to Bn or Bn to An | tpd | | 25 | 135 | ns | VCC = 2.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
| Propagation delay An to Bn or Bn to An | tpd | | 9 | 27 | ns | VCC = 4.5 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
| Propagation delay An to Bn or Bn to An | tpd | | 7 | 23 | ns | VCC = 6.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
| Enable time OE to An or Bn | ten | | 30 | 225 | ns | VCC = 2.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 |
| Enable time OE to An or Bn | ten | | 11 | 45 | ns | VCC = 4.5 V; see Fig. 6; max over -40 °C to +125 °C | 7 |
| Enable time OE to An or Bn | ten | | 9 | 38 | ns | VCC = 6.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 |
| Disable time OE to An or Bn | tdis | | 41 | 225 | ns | VCC = 2.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 |
| Disable time OE to An or Bn | tdis | | 15 | 45 | ns | VCC = 4.5 V; see Fig. 6; max over -40 °C to +125 °C | 7 |
| Disable time OE to An or Bn | tdis | | 12 | 38 | ns | VCC = 6.0 V; see Fig. 6; max over -40 °C to +125 °C | 7 |
| Transition time | tt | | 14 | 90 | ns | VCC = 2.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
| Transition time | tt | | 5 | 18 | ns | VCC = 4.5 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
| Transition time | tt | | 4 | 15 | ns | VCC = 6.0 V; see Fig. 5; max over -40 °C to +125 °C | 7 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `74HC245PW-Q100J`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `74hc245pw-q100j-etched.step` / `74hc245pw-q100j-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74hc245pw-q100j.step` / `74hc245pw-q100j.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/74HC245PW-Q100J.pdf) (15 pp, sha256 `d440653b1177e397`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/74hc245pw-q100j-datasheet.pdf)