74HC244PW

{
 "schema": "adom.pads/1",
 "slug": "74hc244pw",
 "footprint": "TSSOP-20_4.4x6.5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-20_4.4x6.5mm_P0.65mm@sha256:b7ca3a31dd45c122",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -2.925
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-20_4.4x6.5mm_P0.65mm@sha256:b7ca3a31dd45c122"
 },
 "pad_count": 20,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "17",
  "18",
  "19",
  "2",
  "20",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "1OE",
   "type": "input",
   "description": "Active-LOW output enable for bank 1 (drives 1Y0-1Y3). HIGH forces 1Y0-1Y3 into high-impedance OFF-state.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "1A0",
   "type": "input",
   "description": "Bank 1 data input 0. CMOS-level input (VIH ~0.7*VCC).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "2Y0",
   "type": "tri_state",
   "description": "Bank 2 bus output 0, non-inverting buffer of 2A0. High-Z when 2OE is HIGH. Drives up to ±7.8 mA at VCC = 6 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "1A1",
   "type": "input",
   "description": "Bank 1 data input 1.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "2Y1",
   "type": "tri_state",
   "description": "Bank 2 bus output 1, non-inverting buffer of 2A1. High-Z when 2OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "1A2",
   "type": "input",
   "description": "Bank 1 data input 2.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "2Y2",
   "type": "tri_state",
   "description": "Bank 2 bus output 2, non-inverting buffer of 2A2. High-Z when 2OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "1A3",
   "type": "input",
   "description": "Bank 1 data input 3.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "2Y3",
   "type": "tri_state",
   "description": "Bank 2 bus output 3, non-inverting buffer of 2A3. High-Z when 2OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference (0 V).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "2A3",
   "type": "input",
   "description": "Bank 2 data input 3.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "1Y3",
   "type": "tri_state",
   "description": "Bank 1 bus output 3, non-inverting buffer of 1A3. High-Z when 1OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "2A2",
   "type": "input",
   "description": "Bank 2 data input 2.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "1Y2",
   "type": "tri_state",
   "description": "Bank 1 bus output 2, non-inverting buffer of 1A2. High-Z when 1OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "2A1",
   "type": "input",
   "description": "Bank 2 data input 1.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "1Y1",
   "type": "tri_state",
   "description": "Bank 1 bus output 1, non-inverting buffer of 1A1. High-Z when 1OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "17",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "17",
   "name": "2A0",
   "type": "input",
   "description": "Bank 2 data input 0.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "18",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "18",
   "name": "1Y0",
   "type": "tri_state",
   "description": "Bank 1 bus output 0, non-inverting buffer of 1A0. High-Z when 1OE is HIGH.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "19",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "19",
   "name": "2OE",
   "type": "input",
   "description": "Active-LOW output enable for bank 2 (drives 2Y0-2Y3). HIGH forces 2Y0-2Y3 into high-impedance OFF-state.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "20",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "20",
   "name": "VCC",
   "type": "power_in",
   "description": "Supply voltage. 2.0-6.0 V for 74HC244 (4.5-5.5 V for 74HCT244). ICC typically 8 uA at VCC = 6 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}