main
Ray
Publish 0.1.0
3ee5a6c
74HC173D
Nexperia · Flip Flops · SOP-16
74HC173D from Nexperia, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output enable input, active LOW; a HIGH on OE1 (or OE2) forces the Qn outputs into the high-impedance OFF-state. |
| 2 | OE2 | input | Output enable input, active LOW; a HIGH on OE2 (or OE1) forces the Qn outputs into the high-impedance OFF-state. |
| 3 | Q0 | tri_state | 3-state flip-flop output 0, which takes the state of D0 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 4 | Q1 | tri_state | 3-state flip-flop output 1, which takes the state of D1 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 5 | Q2 | tri_state | 3-state flip-flop output 2, which takes the state of D2 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 6 | Q3 | tri_state | 3-state flip-flop output 3, which takes the state of D3 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 7 | CP | input | Clock input, edge triggered on the LOW-to-HIGH transition, which loads the data inputs into the flip-flops. |
| 8 | GND | power_in | Ground, 0 V reference for all voltages on the device. |
| 9 | E1 | input | Data enable input, active LOW; a HIGH on E1 (or E2) puts the device in hold mode, ignoring clock and data. |
| 10 | E2 | input | Data enable input, active LOW; a HIGH on E2 (or E1) puts the device in hold mode, ignoring clock and data. |
| 11 | D3 | input | Data input for flip-flop 3, loaded into Q3 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 12 | D2 | input | Data input for flip-flop 2, loaded into Q2 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 13 | D1 | input | Data input for flip-flop 1, loaded into Q1 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 14 | D0 | input | Data input for flip-flop 0, loaded into Q0 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 15 | MR | input | Asynchronous master reset, active HIGH; a HIGH forces all Qn outputs LOW independently of clock and data. |
| 16 | VCC | power_in | Supply voltage; recommended range is 2.0 V to 6.0 V for 74HC173 and 4.5 V to 5.5 V for 74HCT173. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| Input clamping current | IIK | -20 | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 | |
| Output clamping current | IOK | -20 | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 | |
| Output current | IO | -35 | 35 | mA | -0.5 V < VO < VCC + 0.5 V | 4 | |
| Supply current | ICC | 70 | mA | 4 | |||
| Ground current | IGND | -70 | mA | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Total power dissipation | Ptot | 500 | mW | 4 | |||
| Supply voltage (74HC173) | VCC | 2 | 5 | 6 | V | 74HC173 column | 4 |
| Input voltage | VI | 0 | V | 74HC173 column; max printed as VCC | 4 | ||
| Output voltage | VO | 0 | V | 74HC173 column; max printed as VCC | 4 | ||
| Ambient temperature | Tamb | -40 | 25 | 125 | °C | 74HC173 column | 4 |
| Input transition rise and fall rate | Δt/ΔV | 625 | ns/V | VCC = 2.0 V | 4 | ||
| Input transition rise and fall rate | Δt/ΔV | 1.67 | 139 | ns/V | VCC = 4.5 V | 4 | |
| Input transition rise and fall rate | Δt/ΔV | 83 | ns/V | VCC = 6.0 V | 4 | ||
| HIGH-level input voltage | VIH | 1.5 | 1.2 | V | VCC = 2.0 V; -40 °C to +125 °C | 5 | |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | V | VCC = 4.5 V; -40 °C to +125 °C | 5 | |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | V | VCC = 6.0 V; -40 °C to +125 °C | 5 | |
| LOW-level input voltage | VIL | 0.8 | 0.5 | V | VCC = 2.0 V; -40 °C to +125 °C | 5 | |
| LOW-level input voltage | VIL | 2.1 | 1.35 | V | VCC = 4.5 V; -40 °C to +125 °C | 5 | |
| LOW-level input voltage | VIL | 2.8 | 1.8 | V | VCC = 6.0 V; -40 °C to +125 °C | 5 | |
| HIGH-level output voltage | VOH | 1.9 | 2 | V | VI = VIH or VIL; IO = -20 μA; VCC = 2.0 V; -40 °C to +125 °C | 5 | |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | V | VI = VIH or VIL; IO = -20 μA; VCC = 4.5 V; -40 °C to +125 °C | 5 | |
| HIGH-level output voltage | VOH | 5.9 | 6 | V | VI = VIH or VIL; IO = -20 μA; VCC = 6.0 V; -40 °C to +125 °C | 5 | |
| HIGH-level output voltage | VOH | 3.7 | 4.32 | V | VI = VIH or VIL; IO = -6.0 mA; VCC = 4.5 V; -40 °C to +125 °C | 5 | |
| HIGH-level output voltage | VOH | 5.2 | 5.81 | V | VI = VIH or VIL; IO = -7.8 mA; VCC = 6.0 V; -40 °C to +125 °C | 5 | |
| LOW-level output voltage | VOL | 0 | 0.1 | V | VI = VIH or VIL; IO = 20 μA; VCC = 2.0 V; -40 °C to +125 °C | 5 | |
| LOW-level output voltage | VOL | 0.15 | 0.4 | V | VI = VIH or VIL; IO = 6.0 mA; VCC = 4.5 V; -40 °C to +125 °C | 5 | |
| LOW-level output voltage | VOL | 0.16 | 0.4 | V | VI = VIH or VIL; IO = 7.8 mA; VCC = 6.0 V; -40 °C to +125 °C | 5 | |
| Input leakage current | II | -1 | 1 | μA | VI = VCC or GND; VCC = 6.0 V; -40 °C to +125 °C | 5 | |
| OFF-state output current | IOZ | -10 | 10 | μA | VI = VIH or VIL; VCC = 6.0 V; VO = VCC or GND; -40 °C to +125 °C | 5 | |
| Supply current | ICC | 160 | μA | VI = VCC or GND; IO = 0 A; VCC = 6.0 V; -40 °C to +125 °C | 5 | ||
| Propagation delay CP to Qn | tpd | 55 | 265 | ns | CP to Qn; see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 7 | |
| Propagation delay CP to Qn | tpd | 20 | 53 | ns | CP to Qn; see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 7 | |
| Propagation delay CP to Qn | tpd | 16 | 45 | ns | CP to Qn; see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 7 | |
| HIGH to LOW propagation delay MR to Qn | tPHL | 44 | 225 | ns | MR to Qn; see Fig. 6; VCC = 2.0 V; -40 °C to +125 °C | 7 | |
| HIGH to LOW propagation delay MR to Qn | tPHL | 16 | 45 | ns | MR to Qn; see Fig. 6; VCC = 4.5 V; -40 °C to +125 °C | 7 | |
| HIGH to LOW propagation delay MR to Qn | tPHL | 13 | 38 | ns | MR to Qn; see Fig. 6; VCC = 6.0 V; -40 °C to +125 °C | 7 | |
| Enable time | ten | 52 | 225 | ns | OEn to Qn; see Fig. 7; VCC = 2.0 V; -40 °C to +125 °C | 7 | |
| Enable time | ten | 19 | 45 | ns | OEn to Qn; see Fig. 7; VCC = 4.5 V; -40 °C to +125 °C | 7 | |
| Enable time | ten | 15 | 38 | ns | OEn to Qn; see Fig. 7; VCC = 6.0 V; -40 °C to +125 °C | 7 | |
| Maximum frequency | fmax | 4 | 26 | MHz | CP; see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 8 | |
| Maximum frequency | fmax | 20 | 80 | MHz | CP; see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 8 | |
| Maximum frequency | fmax | 24 | 95 | MHz | CP; see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 8 | |
| Set-up time Dn to CP | tsu | 90 | 17 | ns | Dn to CP; see Fig. 8; VCC = 2.0 V; -40 °C to +125 °C | 8 | |
| Set-up time Dn to CP | tsu | 18 | 6 | ns | Dn to CP; see Fig. 8; VCC = 4.5 V; -40 °C to +125 °C | 8 | |
| Set-up time Dn to CP | tsu | 15 | 5 | ns | Dn to CP; see Fig. 8; VCC = 6.0 V; -40 °C to +125 °C | 8 | |
| Set-up time En to CP | tsu | 150 | 33 | ns | En to CP; see Fig. 8; VCC = 2.0 V; -40 °C to +125 °C | 8 | |
| Set-up time En to CP | tsu | 30 | 12 | ns | En to CP; see Fig. 8; VCC = 4.5 V; -40 °C to +125 °C | 8 | |
| Set-up time En to CP | tsu | 26 | 10 | ns | En to CP; see Fig. 8; VCC = 6.0 V; -40 °C to +125 °C | 8 | |
| Pulse width CP HIGH or LOW | tW | 120 | 14 | ns | CP HIGH or LOW; see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 7 | |
| Pulse width CP HIGH or LOW | tW | 24 | 5 | ns | CP HIGH or LOW; see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 7 | |
| Pulse width CP HIGH or LOW | tW | 20 | 4 | ns | CP HIGH or LOW; see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 7 | |
| Transition time | tt | 14 | 90 | ns | see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 7 | |
| Transition time | tt | 5 | 18 | ns | see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 7 | |
| Transition time | tt | 4 | 15 | ns | see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 7 |
CAD (KiCad official)
- Symbol:
74HC173D - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
74hc173d-etched.step/74hc173d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hc173d.step/74hc173d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (17 pp, sha256
f464525ae971e1ff, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74HC173D
**Nexperia** · Flip Flops · SOP-16
74HC173D from Nexperia, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output enable input, active LOW; a HIGH on OE1 (or OE2) forces the Qn outputs into the high-impedance OFF-state. |
| 2 | OE2 | input | Output enable input, active LOW; a HIGH on OE2 (or OE1) forces the Qn outputs into the high-impedance OFF-state. |
| 3 | Q0 | tri_state | 3-state flip-flop output 0, which takes the state of D0 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 4 | Q1 | tri_state | 3-state flip-flop output 1, which takes the state of D1 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 5 | Q2 | tri_state | 3-state flip-flop output 2, which takes the state of D2 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 6 | Q3 | tri_state | 3-state flip-flop output 3, which takes the state of D3 on the LOW-to-HIGH clock transition when enabled and is high-impedance when disabled. |
| 7 | CP | input | Clock input, edge triggered on the LOW-to-HIGH transition, which loads the data inputs into the flip-flops. |
| 8 | GND | power_in | Ground, 0 V reference for all voltages on the device. |
| 9 | E1 | input | Data enable input, active LOW; a HIGH on E1 (or E2) puts the device in hold mode, ignoring clock and data. |
| 10 | E2 | input | Data enable input, active LOW; a HIGH on E2 (or E1) puts the device in hold mode, ignoring clock and data. |
| 11 | D3 | input | Data input for flip-flop 3, loaded into Q3 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 12 | D2 | input | Data input for flip-flop 2, loaded into Q2 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 13 | D1 | input | Data input for flip-flop 1, loaded into Q1 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 14 | D0 | input | Data input for flip-flop 0, loaded into Q0 on the LOW-to-HIGH clock transition when both enables are LOW. |
| 15 | MR | input | Asynchronous master reset, active HIGH; a HIGH forces all Qn outputs LOW independently of clock and data. |
| 16 | VCC | power_in | Supply voltage; recommended range is 2.0 V to 6.0 V for 74HC173 and 4.5 V to 5.5 V for 74HCT173. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOP-16 |
| Category | Logic |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 7 | V | | 4 |
| Input clamping current | IIK | -20 | | 20 | mA | VI < -0.5 V or VI > VCC + 0.5 V | 4 |
| Output clamping current | IOK | -20 | | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 |
| Output current | IO | -35 | | 35 | mA | -0.5 V < VO < VCC + 0.5 V | 4 |
| Supply current | ICC | | | 70 | mA | | 4 |
| Ground current | IGND | -70 | | | mA | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Total power dissipation | Ptot | | | 500 | mW | | 4 |
| Supply voltage (74HC173) | VCC | 2 | 5 | 6 | V | 74HC173 column | 4 |
| Input voltage | VI | 0 | | | V | 74HC173 column; max printed as VCC | 4 |
| Output voltage | VO | 0 | | | V | 74HC173 column; max printed as VCC | 4 |
| Ambient temperature | Tamb | -40 | 25 | 125 | °C | 74HC173 column | 4 |
| Input transition rise and fall rate | Δt/ΔV | | | 625 | ns/V | VCC = 2.0 V | 4 |
| Input transition rise and fall rate | Δt/ΔV | | 1.67 | 139 | ns/V | VCC = 4.5 V | 4 |
| Input transition rise and fall rate | Δt/ΔV | | | 83 | ns/V | VCC = 6.0 V | 4 |
| HIGH-level input voltage | VIH | 1.5 | 1.2 | | V | VCC = 2.0 V; -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 3.15 | 2.4 | | V | VCC = 4.5 V; -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 4.2 | 3.2 | | V | VCC = 6.0 V; -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | 0.8 | 0.5 | V | VCC = 2.0 V; -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | 2.1 | 1.35 | V | VCC = 4.5 V; -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | 2.8 | 1.8 | V | VCC = 6.0 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 1.9 | 2 | | V | VI = VIH or VIL; IO = -20 μA; VCC = 2.0 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | | V | VI = VIH or VIL; IO = -20 μA; VCC = 4.5 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 5.9 | 6 | | V | VI = VIH or VIL; IO = -20 μA; VCC = 6.0 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 3.7 | 4.32 | | V | VI = VIH or VIL; IO = -6.0 mA; VCC = 4.5 V; -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 5.2 | 5.81 | | V | VI = VIH or VIL; IO = -7.8 mA; VCC = 6.0 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | 0 | 0.1 | V | VI = VIH or VIL; IO = 20 μA; VCC = 2.0 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | 0.15 | 0.4 | V | VI = VIH or VIL; IO = 6.0 mA; VCC = 4.5 V; -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | 0.16 | 0.4 | V | VI = VIH or VIL; IO = 7.8 mA; VCC = 6.0 V; -40 °C to +125 °C | 5 |
| Input leakage current | II | -1 | | 1 | μA | VI = VCC or GND; VCC = 6.0 V; -40 °C to +125 °C | 5 |
| OFF-state output current | IOZ | -10 | | 10 | μA | VI = VIH or VIL; VCC = 6.0 V; VO = VCC or GND; -40 °C to +125 °C | 5 |
| Supply current | ICC | | | 160 | μA | VI = VCC or GND; IO = 0 A; VCC = 6.0 V; -40 °C to +125 °C | 5 |
| Propagation delay CP to Qn | tpd | | 55 | 265 | ns | CP to Qn; see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 7 |
| Propagation delay CP to Qn | tpd | | 20 | 53 | ns | CP to Qn; see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 7 |
| Propagation delay CP to Qn | tpd | | 16 | 45 | ns | CP to Qn; see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 7 |
| HIGH to LOW propagation delay MR to Qn | tPHL | | 44 | 225 | ns | MR to Qn; see Fig. 6; VCC = 2.0 V; -40 °C to +125 °C | 7 |
| HIGH to LOW propagation delay MR to Qn | tPHL | | 16 | 45 | ns | MR to Qn; see Fig. 6; VCC = 4.5 V; -40 °C to +125 °C | 7 |
| HIGH to LOW propagation delay MR to Qn | tPHL | | 13 | 38 | ns | MR to Qn; see Fig. 6; VCC = 6.0 V; -40 °C to +125 °C | 7 |
| Enable time | ten | | 52 | 225 | ns | OEn to Qn; see Fig. 7; VCC = 2.0 V; -40 °C to +125 °C | 7 |
| Enable time | ten | | 19 | 45 | ns | OEn to Qn; see Fig. 7; VCC = 4.5 V; -40 °C to +125 °C | 7 |
| Enable time | ten | | 15 | 38 | ns | OEn to Qn; see Fig. 7; VCC = 6.0 V; -40 °C to +125 °C | 7 |
| Maximum frequency | fmax | 4 | 26 | | MHz | CP; see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 8 |
| Maximum frequency | fmax | 20 | 80 | | MHz | CP; see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 8 |
| Maximum frequency | fmax | 24 | 95 | | MHz | CP; see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 8 |
| Set-up time Dn to CP | tsu | 90 | 17 | | ns | Dn to CP; see Fig. 8; VCC = 2.0 V; -40 °C to +125 °C | 8 |
| Set-up time Dn to CP | tsu | 18 | 6 | | ns | Dn to CP; see Fig. 8; VCC = 4.5 V; -40 °C to +125 °C | 8 |
| Set-up time Dn to CP | tsu | 15 | 5 | | ns | Dn to CP; see Fig. 8; VCC = 6.0 V; -40 °C to +125 °C | 8 |
| Set-up time En to CP | tsu | 150 | 33 | | ns | En to CP; see Fig. 8; VCC = 2.0 V; -40 °C to +125 °C | 8 |
| Set-up time En to CP | tsu | 30 | 12 | | ns | En to CP; see Fig. 8; VCC = 4.5 V; -40 °C to +125 °C | 8 |
| Set-up time En to CP | tsu | 26 | 10 | | ns | En to CP; see Fig. 8; VCC = 6.0 V; -40 °C to +125 °C | 8 |
| Pulse width CP HIGH or LOW | tW | 120 | 14 | | ns | CP HIGH or LOW; see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 7 |
| Pulse width CP HIGH or LOW | tW | 24 | 5 | | ns | CP HIGH or LOW; see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 7 |
| Pulse width CP HIGH or LOW | tW | 20 | 4 | | ns | CP HIGH or LOW; see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 7 |
| Transition time | tt | | 14 | 90 | ns | see Fig. 5; VCC = 2.0 V; -40 °C to +125 °C | 7 |
| Transition time | tt | | 5 | 18 | ns | see Fig. 5; VCC = 4.5 V; -40 °C to +125 °C | 7 |
| Transition time | tt | | 4 | 15 | ns | see Fig. 5; VCC = 6.0 V; -40 °C to +125 °C | 7 |
## CAD (KiCad official)
- Symbol: `74HC173D`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `74hc173d-etched.step` / `74hc173d-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74hc173d.step` / `74hc173d.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/74HC173D.pdf) (17 pp, sha256 `f464525ae971e1ff`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74hc173d-datasheet.pdf)