component
74HC153NS16ARDQ
Public Made by Adomby adom
GR Signal Switches, Multiplexers, Decoders, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74HC153NS16ARDQ
GR · Signal Switches, Multiplexers, Decoders · SOP-16
74HC153NS16ARDQ from GR, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1G | input | Active-LOW output enable for the first 4-to-1 section; when driven HIGH, output 1Y is forced LOW per the truth table. |
| 2 | B | input | Data select input common to both sections; together with A it selects one of C0-C3 (B is the more significant select bit). |
| 3 | 1C3 | input | Data input source 1 for the first section, passed to 1Y when selected by B/A and enabled by 1G LOW. |
| 4 | 1C2 | input | Data input source 1 for the first section, passed to 1Y when selected by B/A and enabled by 1G LOW. |
| 5 | 1C1 | input | Data input source 1 for the first section, passed to 1Y when selected by B/A and enabled by 1G LOW. |
| 6 | 1C0 | input | Data input source 1 for the first section, passed to 1Y when selected by B/A and enabled by 1G LOW. |
| 7 | 1Y | output | Multiplexer output for the first section; follows the selected 1Cx input when 1G is LOW and is LOW when 1G is HIGH. |
| 8 | GND | power_in | Ground reference; all voltages are referenced to GND (0 V). |
| 9 | 2Y | output | Multiplexer output for the second section; follows the selected 2Cx input when 2G is LOW and is LOW when 2G is HIGH. |
| 10 | 2C0 | input | Data input source 2 for the second section, passed to 2Y when selected by B/A and enabled by 2G LOW. |
| 11 | 2C1 | input | Data input source 2 for the second section, passed to 2Y when selected by B/A and enabled by 2G LOW. |
| 12 | 2C2 | input | Data input source 2 for the second section, passed to 2Y when selected by B/A and enabled by 2G LOW. |
| 13 | 2C3 | input | Data input source 2 for the second section, passed to 2Y when selected by B/A and enabled by 2G LOW. |
| 14 | A | input | Data select input common to both sections; together with B it selects one of C0-C3 (A is the less significant select bit). |
| 15 | 2G | input | Active-LOW output enable for the second 4-to-1 section; when driven HIGH, output 2Y is forced LOW per the truth table. |
| 16 | VCC | power_in | Supply voltage; recommended operating range 2 V to 6 V, absolute maximum -0.5 V to 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GR |
| Package | SOP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.5 | 7 | V | 3 | ||
| Power Dissipation | PD | 500 | mW | 3 | |||
| Junction Temperature | TJ | 125 | ℃ | 3 | |||
| Operating Temperature | TOP | -40 | 85 | ℃ | 3 | ||
| Supply Voltage (operating range, from Features) | VCC | 2 | 6 | V | Wide operating voltage range (Features statement) | 1 | |
| High Level Input Voltage | VIH | 1.5 | V | VCC=2V | 4 | ||
| High Level Input Voltage | VIH | 3.15 | V | VCC=4.5V | 4 | ||
| High Level Input Voltage | VIH | 4.2 | V | VCC=6V | 4 | ||
| Low Level Input Voltage | VIL | 0.5 | V | VCC=2V | 4 | ||
| Low Level Input Voltage | VIL | 1.35 | V | VCC=4.5V | 4 | ||
| Low Level Input Voltage | VIL | 1.8 | V | VCC=6V | 4 | ||
| High Level Output Voltage | VOH | 1.9 | V | VCC=2V,IO=-20uA | 4 | ||
| High Level Output Voltage | VOH | 4.4 | V | VCC=4.5V,IO=-20uA | 4 | ||
| High Level Output Voltage | VOH | 5.9 | V | VCC=6V,IO=-20uA | 4 | ||
| High Level Output Voltage | VOH | 4 | V | VCC=4.5V,IO=-4mA | 4 | ||
| High Level Output Voltage | VOH | 5.5 | V | VCC=6V,IO=-5.2mA | 4 | ||
| Low Level Output Voltage | VOL | 0.1 | V | VCC=2V,IO=20uA | 4 | ||
| Low Level Output Voltage | VOL | 0.4 | V | VCC=4.5V,IO=4mA | 4 | ||
| Input Leakage Current | II | -1 | 0 | 1 | uA | VCC=6V,VI=VCC or GND | 4 |
| Quiescent Supply Current | ICC | 0 | 10 | uA | VCC=6V,VI=VCC/GND | 4 |
CAD (KiCad official)
- Symbol:
74HC153NS16ARDQ - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
74hc153ns16ardq-etched.step/74hc153ns16ardq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74hc153ns16ardq.step/74hc153ns16ardq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GR datasheet (7 pp, sha256
fff898983d4d102b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).