component
74CBTLV3126DS
Public Made by Adomby adom
Nexperia Signal Switches, Multiplexers, Decoders, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74CBTLV3126DS
Nexperia · Signal Switches, Multiplexers, Decoders · SSOP-16-150mil
74CBTLV3126DS from Nexperia, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | n.c. | unconnected | Not connected; the datasheet lists no function for this pin on the DS (SSOP16) package. |
| 2 | 1OE | input | Output enable input for switch 1; the switch is ON when HIGH and OFF (high-impedance) when LOW, and nOE should be tied to GND through a pull-down resistor to keep the OFF-state during power-up or power-down. |
| 3 | 1A | bidirectional | A-side input/output of switch 1; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 4 | 1B | bidirectional | B-side output/input of switch 1; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 5 | 2OE | input | Output enable input for switch 2; the switch is ON when HIGH and OFF (high-impedance) when LOW, and nOE should be tied to GND through a pull-down resistor to keep the OFF-state during power-up or power-down. |
| 6 | 2A | bidirectional | A-side input/output of switch 2; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 7 | 2B | bidirectional | B-side output/input of switch 2; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 8 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 9 | n.c. | unconnected | Not connected; the datasheet lists no function for this pin on the DS (SSOP16) package. |
| 10 | 3B | bidirectional | B-side output/input of switch 3; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 11 | 3A | bidirectional | A-side input/output of switch 3; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 12 | 3OE | input | Output enable input for switch 3; the switch is ON when HIGH and OFF (high-impedance) when LOW, and nOE should be tied to GND through a pull-down resistor to keep the OFF-state during power-up or power-down. |
| 13 | 4B | bidirectional | B-side output/input of switch 4; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 14 | 4A | bidirectional | A-side input/output of switch 4; rail-to-rail switching with switch voltage limited to 0 V to VCC and switch current limited to ±128 mA. |
| 15 | 4OE | input | Output enable input for switch 4; the switch is ON when HIGH and OFF (high-impedance) when LOW, and nOE should be tied to GND through a pull-down resistor to keep the OFF-state during power-up or power-down. |
| 16 | VCC | power_in | Supply voltage; recommended operating range 2.3 V to 3.6 V, with absolute maximum rating of -0.5 V to +4.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SSOP-16-150mil |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | -0.5 | 4.6 | V | 4 | ||
| input voltage control inputs | VI | -0.5 | 4.6 | V | control inputs | 4 | |
| switch voltage | VSW | -0.5 | V | enable and disable mode; max printed as VCC + 0.5 | 4 | ||
| input clamping current | IIK | -50 | mA | VI < -0.5 V | 4 | ||
| switch clamping current | ISK | -50 | mA | VI < -0.5 V | 4 | ||
| switch current | ISW | -128 | 128 | mA | VSW = 0 V to VCC | 4 | |
| supply current | ICC | 100 | mA | 4 | |||
| ground current | IGND | -100 | mA | 4 | |||
| storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| supply voltage | VCC | 2.3 | 3.6 | V | 4 | ||
| input voltage control inputs | VI | 0 | 3.6 | V | control inputs | 4 | |
| switch voltage | VSW | 0 | V | enable and disable mode; max printed as VCC | 4 | ||
| ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 0 | 200 | ns/V | pin nOE; VCC = 2.3 V to 3.6 V | 4 | |
| HIGH-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 2 | V | VCC = 3.0 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.9 | V | VCC = 3.0 V to 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| input leakage current | II | -20 | 20 | μA | pin nOE; VI = GND to VCC; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 | |
| OFF-state leakage current | IS(OFF) | -20 | 20 | μA | VCC = 3.6 V; see Fig. 3; Tamb = -40 °C to +125 °C | 5 | |
| ON-state leakage current | IS(ON) | -20 | 20 | μA | VCC = 3.6 V; see Fig. 4; Tamb = -40 °C to +125 °C | 5 | |
| power-off leakage current | IOFF | -50 | 50 | μA | VI or VO = 0 V to 3.6 V; VCC = 0 V; Tamb = -40 °C to +125 °C | 5 | |
| supply current | ICC | 50 | μA | VI = GND or VCC; IO = 0 A; VSW = GND or VCC; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| additional supply current | ΔICC | 2000 | μA | pin nOE; VI = VCC - 0.6 V; VSW = GND or VCC; VCC = 3.6 V; Tamb = -40 °C to +125 °C | 5 | ||
| ON resistance | RON | 15 | Ω | VCC = 2.3 V to 2.7 V; ISW = 64 mA; VI = 0 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance | RON | 60 | Ω | VCC = 2.3 V to 2.7 V; ISW = 15 mA; VI = 1.7 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance | RON | 11 | Ω | VCC = 3.0 V to 3.6 V; ISW = 64 mA; VI = 0 V; Tamb = -40 °C to +125 °C | 6 | ||
| ON resistance | RON | 25.5 | Ω | VCC = 3.0 V to 3.6 V; ISW = 15 mA; VI = 2.4 V; Tamb = -40 °C to +125 °C | 6 | ||
| propagation delay | tpd | 0.2 | ns | nA to nB or nB to nA; see Fig. 13; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 | ||
| propagation delay | tpd | 0.31 | ns | nA to nB or nB to nA; see Fig. 13; VCC = 3.0 V to 3.6 V; Tamb = -40 °C to +125 °C | 9 | ||
| enable time | ten | 1 | 6 | ns | nOE to nA or nB; see Fig. 14; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 | |
| disable time | tdis | 1 | 6.5 | ns | nOE to nA or nB; see Fig. 14; VCC = 2.3 V to 2.7 V; Tamb = -40 °C to +125 °C | 9 |
CAD (KiCad official)
- Symbol:
74CBTLV3126DS - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
74cbtlv3126ds-etched.step/74cbtlv3126ds-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74cbtlv3126ds.step/74cbtlv3126ds.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (17 pp, sha256
7882e9fbd9f2a76a, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).