component
74AVCH4T245PW-Q10J
Public Made by Adomby adom
Nexperia Translators, Level Shifters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74AVCH4T245PW-Q10J
Nexperia · Translators, Level Shifters · TSSOP-16
74AVCH4T245PW-Q10J from Nexperia, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC(A) | power_in | Supply voltage A, range 0.8 V to 3.6 V; the nAn, nOE and nDIR inputs are referenced to VCC(A). |
| 2 | 1DIR | input | Direction control for the 1A1/1A2 and 1B1/1B2 channels; HIGH allows transmission from nAn to nBn and LOW allows transmission from nBn to nAn. |
| 3 | 2DIR | input | Direction control for the 2A1/2A2 and 2B1/2B2 channels; HIGH allows transmission from nAn to nBn and LOW allows transmission from nBn to nAn. |
| 4 | 1A1 | bidirectional | Data input or output on the VCC(A) side, referenced to VCC(A); bus hold is active on the data inputs. |
| 5 | 1A2 | bidirectional | Data input or output on the VCC(A) side, referenced to VCC(A); bus hold is active on the data inputs. |
| 6 | 2A1 | bidirectional | Data input or output on the VCC(A) side, referenced to VCC(A); bus hold is active on the data inputs. |
| 7 | 2A2 | bidirectional | Data input or output on the VCC(A) side, referenced to VCC(A); bus hold is active on the data inputs. |
| 8 | GND | power_in | Ground (0 V); all GND pins must be connected to ground (0 V). |
| 9 | GND | power_in | Ground (0 V); all GND pins must be connected to ground (0 V). |
| 10 | 2B2 | bidirectional | Data input or output on the VCC(B) side, referenced to VCC(B); bus hold is active on the data inputs. |
| 11 | 2B1 | bidirectional | Data input or output on the VCC(B) side, referenced to VCC(B); bus hold is active on the data inputs. |
| 12 | 1B2 | bidirectional | Data input or output on the VCC(B) side, referenced to VCC(B); bus hold is active on the data inputs. |
| 13 | 1B1 | bidirectional | Data input or output on the VCC(B) side, referenced to VCC(B); bus hold is active on the data inputs. |
| 14 | 2OE | input | Output enable input, active LOW; HIGH places the 2An and 2Bn outputs in the high-impedance OFF-state. |
| 15 | 1OE | input | Output enable input, active LOW; HIGH places the 1An and 1Bn outputs in the high-impedance OFF-state. |
| 16 | VCC(B) | power_in | Supply voltage B, range 0.8 V to 3.6 V; the nBn inputs are referenced to VCC(B). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage A | VCC(A) | -0.5 | 4.6 | V | 5 | ||
| Supply voltage B | VCC(B) | -0.5 | 4.6 | V | 5 | ||
| Input clamping current | IIK | -50 | mA | VI < 0 V | 5 | ||
| Input voltage | VI | -0.5 | 4.6 | V | 5 | ||
| Output clamping current | IOK | -50 | mA | VO < 0 V | 5 | ||
| Output voltage, active mode | VO | -0.5 | V | Active mode; max printed as VCCO + 0.5 V | 5 | ||
| Output voltage, suspend or 3-state mode | VO | -0.5 | 4.6 | V | Suspend or 3-state mode | 5 | |
| Output current | IO | -50 | 50 | mA | VO = 0 V to VCCO | 5 | |
| Supply current per VCC(A) or VCC(B) pin | ICC | 100 | mA | 5 | |||
| Ground current per GND pin | IGND | -100 | mA | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 5 | ||
| Supply voltage A | VCC(A) | 0.8 | 3.6 | V | 5 | ||
| Supply voltage B | VCC(B) | 0.8 | 3.6 | V | 5 | ||
| Input voltage | VI | 0 | 3.6 | V | 5 | ||
| Output voltage, active mode | VO | 0 | V | Active mode; max printed as VCCO | 5 | ||
| Output voltage, suspend or 3-state mode | VO | 0 | 3.6 | V | Suspend or 3-state mode | 5 | |
| Ambient temperature | Tamb | -40 | 125 | °C | 5 | ||
| Input transition rise and fall rate | Δt/ΔV | 5 | ns/V | VCCI = 0.8 V to 3.6 V | 5 | ||
| HIGH-level input voltage, data input | VIH | 1.6 | V | -40 °C to +125 °C; VCCI = 2.3 V to 2.7 V | 7 | ||
| HIGH-level input voltage, data input | VIH | 2 | V | -40 °C to +125 °C; VCCI = 3.0 V to 3.6 V | 7 | ||
| HIGH-level input voltage, nDIR, nOE input | VIH | 1.6 | V | -40 °C to +125 °C; VCC(A) = 2.3 V to 2.7 V | 7 | ||
| HIGH-level input voltage, nDIR, nOE input | VIH | 2 | V | -40 °C to +125 °C; VCC(A) = 3.0 V to 3.6 V | 7 | ||
| LOW-level input voltage, data input | VIL | 0.7 | V | -40 °C to +125 °C; VCCI = 2.3 V to 2.7 V | 7 | ||
| LOW-level input voltage, data input | VIL | 0.8 | V | -40 °C to +125 °C; VCCI = 3.0 V to 3.6 V | 7 | ||
| LOW-level input voltage, nDIR, nOE input | VIL | 0.7 | V | -40 °C to +125 °C; VCC(A) = 2.3 V to 2.7 V | 7 | ||
| LOW-level input voltage, nDIR, nOE input | VIL | 0.8 | V | -40 °C to +125 °C; VCC(A) = 3.0 V to 3.6 V | 7 | ||
| HIGH-level output voltage | VOH | 0.85 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = -3 mA; VCC(A) = VCC(B) = 1.1 V | 7 | ||
| HIGH-level output voltage | VOH | 1.05 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = -6 mA; VCC(A) = VCC(B) = 1.4 V | 7 | ||
| HIGH-level output voltage | VOH | 1.2 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = -8 mA; VCC(A) = VCC(B) = 1.65 V | 7 | ||
| HIGH-level output voltage | VOH | 1.75 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = -9 mA; VCC(A) = VCC(B) = 2.3 V | 7 | ||
| HIGH-level output voltage | VOH | 2.3 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = -12 mA; VCC(A) = VCC(B) = 3.0 V | 7 | ||
| LOW-level output voltage | VOL | 0.1 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = 100 µA; VCC(A) = VCC(B) = 0.8 V to 3.6 V | 7 | ||
| LOW-level output voltage | VOL | 0.25 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = 3 mA; VCC(A) = VCC(B) = 1.1 V | 7 | ||
| LOW-level output voltage | VOL | 0.35 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = 6 mA; VCC(A) = VCC(B) = 1.4 V | 7 | ||
| LOW-level output voltage | VOL | 0.45 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = 8 mA; VCC(A) = VCC(B) = 1.65 V | 7 | ||
| LOW-level output voltage | VOL | 0.55 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = 9 mA; VCC(A) = VCC(B) = 2.3 V | 7 | ||
| LOW-level output voltage | VOL | 0.7 | V | -40 °C to +125 °C; VI = VIH or VIL; IO = 12 mA; VCC(A) = VCC(B) = 3.0 V | 7 | ||
| Input leakage current | II | -5 | 5 | µA | -40 °C to +125 °C; nDIR, nOE input; VI = 0 V or 3.6 V; VCC(A) = VCC(B) = 0.8 V to 3.6 V | 7 | |
| Bus hold LOW current | IBHL | 15 | µA | -40 °C to +125 °C; A or B port; VI = 0.49 V; VCC(A) = VCC(B) = 1.4 V | 8 | ||
| Bus hold LOW current | IBHL | 25 | µA | -40 °C to +125 °C; A or B port; VI = 0.58 V; VCC(A) = VCC(B) = 1.65 V | 8 | ||
| Bus hold LOW current | IBHL | 45 | µA | -40 °C to +125 °C; A or B port; VI = 0.70 V; VCC(A) = VCC(B) = 2.3 V | 8 | ||
| Bus hold LOW current | IBHL | 90 | µA | -40 °C to +125 °C; A or B port; VI = 0.80 V; VCC(A) = VCC(B) = 3.0 V | 8 | ||
| Bus hold HIGH current | IBHH | -15 | µA | -40 °C to +125 °C; A or B port; VI = 0.91 V; VCC(A) = VCC(B) = 1.4 V | 8 | ||
| Bus hold HIGH current | IBHH | -25 | µA | -40 °C to +125 °C; A or B port; VI = 1.07 V; VCC(A) = VCC(B) = 1.65 V | 8 | ||
| Bus hold HIGH current | IBHH | -45 | µA | -40 °C to +125 °C; A or B port; VI = 1.60 V; VCC(A) = VCC(B) = 2.3 V | 8 | ||
| Bus hold HIGH current | IBHH | -100 | µA | -40 °C to +125 °C; A or B port; VI = 2.00 V; VCC(A) = VCC(B) = 3.0 V | 8 | ||
| OFF-state output current | IOZ | -30 | 30 | µA | -40 °C to +125 °C; A or B port; VO = 0 V or VCCO; VCC(A) = VCC(B) = 3.6 V | 8 | |
| OFF-state output current, suspend mode | IOZ | -30 | 30 | µA | -40 °C to +125 °C; suspend mode A port; VO = 0 V or VCCO; VCC(A) = 3.6 V; VCC(B) = 0 V | 8 | |
| Power-off leakage current | IOFF | -30 | 30 | µA | -40 °C to +125 °C; A port; VI or VO = 0 V to 3.6 V; VCC(A) = 0 V; VCC(B) = 0.8 V to 3.6 V | 8 | |
| Supply current, A port | ICC | 55 | µA | -40 °C to +125 °C; A port; VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0.8 V to 3.6 V; VCC(B) = 0.8 V to 3.6 V | 9 | ||
| Supply current, A port | ICC | 50 | µA | -40 °C to +125 °C; A port; VI = 0 V or VCCI; IO = 0 A; VCC(A) = 3.6 V; VCC(B) = 0 V | 9 | ||
| Supply current, A port | ICC | -12 | µA | -40 °C to +125 °C; A port; VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0 V; VCC(B) = 3.6 V | 9 | ||
| Supply current, B port | ICC | 55 | µA | -40 °C to +125 °C; B port; VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0.8 V to 3.6 V; VCC(B) = 0.8 V to 3.6 V | 9 | ||
| Supply current, B port | ICC | -12 | µA | -40 °C to +125 °C; B port; VI = 0 V or VCCI; IO = 0 A; VCC(A) = 3.6 V; VCC(B) = 0 V | 9 | ||
| Supply current, B port | ICC | 50 | µA | -40 °C to +125 °C; B port; VI = 0 V or VCCI; IO = 0 A; VCC(A) = 0 V; VCC(B) = 3.6 V | 9 | ||
| Supply current, A plus B port | ICC | 70 | µA | -40 °C to +125 °C; A plus B port (ICC(A) + ICC(B)); IO = 0 A; VI = 0 V or VCCI; VCC(A) = 0.8 V to 3.6 V; VCC(B) = 0.8 V to 3.6 V | 9 |
CAD (KiCad official)
- Symbol:
74AVCH4T245PW-Q10J - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
74avch4t245pw-q10j-etched.step/74avch4t245pw-q10j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74avch4t245pw-q10j.step/74avch4t245pw-q10j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (25 pp, sha256
c9975039038dbe2b, retrieved 2026-10-18, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).