Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

74AVC4T245QWBQBRQ1

Texas Instruments · Translators, Level Shifters · WQFN-16(2.5x3.5)

74AVC4T245QWBQBRQ1 from Texas Instruments, in a WQFN-16(2.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VCCA power_in A-port power supply voltage, 1.2V ≤ VCCA ≤ 3.6V.
2 1DIR input Direction-control input for the '1' ports, referenced to VCCA (high = A to B, low = B to A when OE is low).
3 2DIR input Direction-control input for the '2' ports, referenced to VCCA (high = A to B, low = B to A when OE is low).
4 1A1 bidirectional Input/output 1A1, referenced to VCCA.
5 1A2 bidirectional Input/output 1A2, referenced to VCCA.
6 2A1 bidirectional Input/output 2A1, referenced to VCCA.
7 2A2 bidirectional Input/output 2A2, referenced to VCCA.
8 GND power_in Ground.
9 GND power_in Ground.
10 2B2 bidirectional Input/output 2B2, referenced to VCCB.
11 2B1 bidirectional Input/output 2B1, referenced to VCCB.
12 1B2 bidirectional Input/output 1B2, referenced to VCCB.
13 1B1 bidirectional Input/output 1B1, referenced to VCCB.
14 2OE input 3-state output-mode enable for the '2' outputs, referenced to VCCA; pull high to place outputs in 3-state mode.
15 1OE input 3-state output-mode enable for the '1' outputs, referenced to VCCA; pull high to place outputs in 3-state mode.
16 VCCB power_in B-port power supply voltage, 1.2V ≤ VCCB ≤ 3.6V.
17 Thermal pad passive The exposed thermal pad must be connected as a secondary GND or be left electrically open.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-16(2.5x3.5)
Category Logic
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCCA, VCCB VCCA, VCCB -0.5 4.6 V 6
Input voltage, I/O ports (A port) VI -0.5 4.6 V 6
Input voltage, I/O ports (B port) VI -0.5 4.6 V 6
Input voltage, control inputs VI -0.5 4.6 V 6
Voltage applied to any output in high-impedance or power-off state, A port VO -0.5 4.6 V 6
Voltage applied to any output in high-impedance or power-off state, B port VO -0.5 4.6 V 6
Input clamp current IIK -50 mA VI < 0 6
Output clamp current IOK -50 mA VO < 0 6
Continuous output current IO -50 50 mA 6
Continuous current through VCCA, VCCB, or GND -100 100 mA 6
Storage temperature Tstg -65 150 °C 6
Supply voltage VCCA VCCA 1.2 3.6 V 6
Supply voltage VCCB VCCB 1.2 3.6 V 6
High-level input voltage, data inputs VIH 1.6 V VCCI 1.95V to 2.7V 6
High-level input voltage, data inputs VIH 2 V VCCI 2.7V to 3.6V 6
Low-level input voltage, data inputs VIL 0.7 V VCCI 1.95V to 2.7V 6
Low-level input voltage, data inputs VIL 0.8 V VCCI 2.7V to 3.6V 6
Input voltage VI 0 3.6 V 7
Output voltage, 3-state VO 0 3.6 V 3-state 7
High-level output current IOH -3 mA VCCO 1.2V 7
High-level output current IOH -6 mA VCCO 1.4V to 1.6V 7
High-level output current IOH -8 mA VCCO 1.65V to 1.95V 7
High-level output current IOH -9 mA VCCO 2.3V to 2.7V 7
High-level output current IOH -12 mA VCCO 3V to 3.6V 7
Low-level output current IOL 3 mA VCCO 1.1V to 1.2V 7
Low-level output current IOL 6 mA VCCO 1.4V to 1.6V 7
Low-level output current IOL 8 mA VCCO 1.65V to 1.95V 7
Low-level output current IOL 9 mA VCCO 2.3V to 2.7V 7
Low-level output current IOL 12 mA VCCO 3V to 3.6V 7
Input transition rise or fall rate Δt/Δv 5 ns/V 7
Operating ambient temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance (BQB) RθJA 80.8 °C/W BQB (WQFN) 16 pins 7
Junction-to-case (top) thermal resistance (BQB) RθJC(top) 77.9 °C/W BQB (WQFN) 16 pins 7
Junction-to-board thermal resistance (BQB) RθJB 50.7 °C/W BQB (WQFN) 16 pins 7
Junction-to-top characterization parameter (BQB) ψJT 7.4 °C/W BQB (WQFN) 16 pins 7
Junction-to-board characterization parameter (BQB) ψJB 50.6 °C/W BQB (WQFN) 16 pins 7
Junction-to-case (bottom) thermal resistance (BQB) RθJC(bot) 28.4 °C/W BQB (WQFN) 16 pins 7
High-level output voltage VOH 0.95 V IOH = -3mA, VI = VIH, VCCA = VCCB = 1.2V, TA = 25°C 8
High-level output voltage VOH 1.05 V IOH = -6mA, VI = VIH, VCCA = VCCB = 1.4V, TA = -40°C to 125°C 8
High-level output voltage VOH 1.2 V IOH = -8mA, VI = VIH, VCCA = VCCB = 1.65V, TA = -40°C to 125°C 8
High-level output voltage VOH 1.75 V IOH = -9mA, VI = VIH, VCCA = VCCB = 2.3V, TA = -40°C to 125°C 8
High-level output voltage VOH 2.3 V IOH = -12mA, VI = VIH, VCCA = VCCB = 3V, TA = -40°C to 125°C 8
Low-level output voltage VOL 0.2 V IOL = 100μA, VI = VIL, VCCA/VCCB = 1.2V to 3.6V, TA = -40°C to 125°C 8
Low-level output voltage VOL 0.25 V IOL = 3mA, VI = VIL, VCCA = VCCB = 1.2V, TA = 25°C 8
Low-level output voltage VOL 0.35 V IOL = 6mA, VI = VIL, VCCA = VCCB = 1.4V, TA = -40°C to 125°C 8
Low-level output voltage VOL 0.45 V IOL = 8mA, VI = VIL, VCCA = VCCB = 1.65V, TA = -40°C to 125°C 8
Low-level output voltage VOL 0.55 V IOL = 9mA, VI = VIL, VCCA = VCCB = 2.3V, TA = -40°C to 125°C 8
Low-level output voltage VOL 0.7 V IOL = 12mA, VI = VIL, VCCA = VCCB = 3V, TA = -40°C to 125°C 8
Control input leakage current II -0.25 0.025 0.25 μA Control inputs, VI = VCCA or GND, VCCA/VCCB = 1.2V to 3.6V, TA = 25°C 8
Control input leakage current II -1.5 1.5 μA Control inputs, VI = VCCA or GND, VCCA/VCCB = 1.2V to 3.6V, TA = -40°C to 125°C 8
Partial power-down leakage current Ioff -1 0.1 1 μA A or B port, VI or VO = 0 to 3.6V, VCCA = 0V, VCCB = 0V to 3.6V, TA = 25°C 8
Partial power-down leakage current Ioff -5 5 μA A or B port, VI or VO = 0 to 3.6V, VCCA = 0V, VCCB = 0V to 3.6V, TA = -40°C to 125°C 8
High-impedance output leakage current IOZ -2.5 0.5 2.5 μA A or B port, VO = VCCO or GND, VI = VCCI or GND, OE = VIH, VCCA = VCCB = 3.6V, TA = 25°C 8
High-impedance output leakage current IOZ -5 5 μA A or B port, VO = VCCO or GND, VI = VCCI or GND, OE = VIH, VCCA = VCCB = 3.6V, TA = -40°C to 125°C 8
VCCA supply current ICCA 8 μA VI = VCCI or GND, IO = 0, VCCA/VCCB = 1.2V to 3.6V, TA = -40°C to 125°C 8
VCCB supply current ICCB 8 μA VI = VCCI or GND, IO = 0, VCCA/VCCB = 1.2V to 3.6V, TA = -40°C to 125°C 8
Combined supply current ICCA + ICCB 16 μA VI = VCCI or GND, IO = 0, VCCA/VCCB = 1.2V to 3.6V, TA = -40°C to 125°C 8
Input capacitance, control inputs Ci 3.5 4.5 pF VI = 3.3V or GND, VCCA = VCCB = 3.3V, TA = 25°C 9
Input capacitance, control inputs Ci 7 pF VI = 3.3V or GND, VCCA = VCCB = 3.3V, TA = -40°C to 125°C 9
I/O capacitance, A or B port Cio 6 pF VO = 3.3V or GND, VCCA = VCCB = 3.3V, TA = 25°C 9

CAD (Adom-generated)

  • Symbol: 74AVC4T245QWBQBRQ1
  • Footprint: Adom_Gen:Texas_Instruments_74_0e23a5
  • 3D model: generated to fit the land (STEP)
  • 3D model files: 74avc4t245qwbqbrq1-etched.step / 74avc4t245qwbqbrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 74avc4t245qwbqbrq1.step / 74avc4t245qwbqbrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 d7e968e4e520609a, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF