component
74AUP1G09GM
Public Made by Adomby adom
Nexperia Logic Gates, XSON-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown74AUP1G09GM
Nexperia · Logic Gates · XSON-6(1x1.5)
74AUP1G09GM from Nexperia, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B | input | Data input B of the 2-input AND gate; the datasheet states Schmitt-trigger inputs, overvoltage tolerant to 3.6 V, and recommended input voltage 0 to 3.6 V. |
| 2 | A | input | Data input A of the 2-input AND gate; the datasheet states Schmitt-trigger inputs, overvoltage tolerant to 3.6 V, and recommended input voltage 0 to 3.6 V. |
| 3 | GND | power_in | Ground (0 V) reference for all voltages in the device. |
| 4 | Y | output | Open-drain data output of the AND function (Y = A AND B); output is high-impedance when both inputs are HIGH, and output voltage is limited to 0 to 3.6 V in active and power-down modes. |
| 5 | n.c. | unconnected | Not connected; this pin has no internal connection on the XSON6 package. |
| 6 | VCC | power_in | Supply voltage, recommended range 0.8 V to 3.6 V (absolute maximum -0.5 V to +4.6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | XSON-6(1x1.5) |
| Category | Logic |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage (absolute maximum) | VCC | -0.5 | 4.6 | V | 4 | ||
| input clamping current | IIK | -50 | mA | VI < 0 V | 4 | ||
| input voltage (absolute maximum) | VI | -0.5 | 4.6 | V | 4 | ||
| output clamping current | IOK | -50 | mA | VO < 0 V | 4 | ||
| output voltage (absolute maximum) | VO | -0.5 | 4.6 | V | Active mode and Power-down mode | 4 | |
| output current | IO | 20 | mA | VO = 0 V to VCC | 4 | ||
| supply current (absolute maximum) | ICC | 50 | mA | 4 | |||
| ground current | IGND | -50 | mA | 4 | |||
| storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| total power dissipation | Ptot | 250 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| supply voltage (recommended) | VCC | 0.8 | 3.6 | V | 4 | ||
| input voltage (recommended) | VI | 0 | 3.6 | V | 4 | ||
| output voltage (recommended) | VO | 0 | 3.6 | V | Active mode and Power-down mode | 4 | |
| ambient temperature | Tamb | -40 | 125 | °C | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 0 | 200 | ns/V | VCC = 0.8 V to 3.6 V | 4 | |
| HIGH-level input voltage | VIH | 0.75 | × VCC | Tamb = -40 °C to +125 °C; VCC = 0.8 V | 6 | ||
| HIGH-level input voltage | VIH | 0.7 | × VCC | Tamb = -40 °C to +125 °C; VCC = 0.9 V to 1.95 V | 6 | ||
| HIGH-level input voltage | VIH | 1.6 | V | Tamb = -40 °C to +125 °C; VCC = 2.3 V to 2.7 V | 6 | ||
| HIGH-level input voltage | VIH | 2 | V | Tamb = -40 °C to +125 °C; VCC = 3.0 V to 3.6 V | 6 | ||
| LOW-level input voltage | VIL | 0.25 | × VCC | Tamb = -40 °C to +125 °C; VCC = 0.8 V | 6 | ||
| LOW-level input voltage | VIL | 0.3 | × VCC | Tamb = -40 °C to +125 °C; VCC = 0.9 V to 1.95 V | 6 | ||
| LOW-level input voltage | VIL | 0.7 | V | Tamb = -40 °C to +125 °C; VCC = 2.3 V to 2.7 V | 6 | ||
| LOW-level input voltage | VIL | 0.9 | V | Tamb = -40 °C to +125 °C; VCC = 3.0 V to 3.6 V | 6 | ||
| LOW-level output voltage | VOL | 0.11 | V | Tamb = -40 °C to +125 °C; IO = 20 μA; VCC = 0.8 V to 3.6 V | 6 | ||
| LOW-level output voltage | VOL | 0.33 | × VCC | Tamb = -40 °C to +125 °C; IO = 1.1 mA; VCC = 1.1 V | 6 | ||
| LOW-level output voltage | VOL | 0.41 | V | Tamb = -40 °C to +125 °C; IO = 1.7 mA; VCC = 1.4 V | 6 | ||
| LOW-level output voltage | VOL | 0.39 | V | Tamb = -40 °C to +125 °C; IO = 1.9 mA; VCC = 1.65 V | 6 | ||
| LOW-level output voltage | VOL | 0.36 | V | Tamb = -40 °C to +125 °C; IO = 2.3 mA; VCC = 2.3 V | 6 | ||
| LOW-level output voltage | VOL | 0.5 | V | Tamb = -40 °C to +125 °C; IO = 3.1 mA; VCC = 2.3 V | 6 | ||
| input leakage current | II | -0.75 | 0.75 | μA | Tamb = -40 °C to +125 °C; VI = GND to 3.6 V; VCC = 0 V to 3.6 V | 6 | |
| OFF-state output current | IOZ | -0.75 | 0.75 | μA | Tamb = -40 °C to +125 °C; VI = VIH or VIL; VO = 0 V to 3.6 V; VCC = 3.6 V | 6 | |
| power-off leakage current | IOFF | -0.75 | 0.75 | μA | Tamb = -40 °C to +125 °C; VI or VO = 0 V to 3.6 V; VCC = 0 V | 6 | |
| additional power-off leakage current | ΔIOFF | -0.75 | 0.75 | μA | Tamb = -40 °C to +125 °C; VI or VO = 0 V to 3.6 V; VCC = 0 V to 0.2 V | 6 | |
| supply current | ICC | 1.4 | μA | Tamb = -40 °C to +125 °C; VI = GND or VCC; IO = 0 A; VCC = 0.8 V to 3.6 V | 6 | ||
| additional supply current | ΔICC | 75 | μA | Tamb = -40 °C to +125 °C; VI = VCC - 0.6 V; IO = 0 A; VCC = 3.3 V | 6 | ||
| propagation delay A or B to Y | tpd | 1.8 | 12.6 | ns | Tamb = -40 °C to +125 °C; CL = 5 pF; VCC = 1.1 V to 1.3 V | 7 | |
| propagation delay A or B to Y | tpd | 1.4 | 8.2 | ns | Tamb = -40 °C to +125 °C; CL = 5 pF; VCC = 1.4 V to 1.6 V | 7 | |
| propagation delay A or B to Y | tpd | 1.1 | 6.5 | ns | Tamb = -40 °C to +125 °C; CL = 5 pF; VCC = 1.65 V to 1.95 V | 7 | |
| propagation delay A or B to Y | tpd | 0.9 | 4.9 | ns | Tamb = -40 °C to +125 °C; CL = 5 pF; VCC = 2.3 V to 2.7 V | 7 | |
| propagation delay A or B to Y | tpd | 0.8 | 4.9 | ns | Tamb = -40 °C to +125 °C; CL = 5 pF; VCC = 3.0 V to 3.6 V | 7 | |
| propagation delay A or B to Y | tpd | 2.1 | 15.1 | ns | Tamb = -40 °C to +125 °C; CL = 10 pF; VCC = 1.1 V to 1.3 V | 7 | |
| propagation delay A or B to Y | tpd | 1.7 | 9.7 | ns | Tamb = -40 °C to +125 °C; CL = 10 pF; VCC = 1.4 V to 1.6 V | 7 | |
| propagation delay A or B to Y | tpd | 1.4 | 7.8 | ns | Tamb = -40 °C to +125 °C; CL = 10 pF; VCC = 1.65 V to 1.95 V | 7 | |
| propagation delay A or B to Y | tpd | 1.2 | 5.9 | ns | Tamb = -40 °C to +125 °C; CL = 10 pF; VCC = 2.3 V to 2.7 V | 7 | |
| propagation delay A or B to Y | tpd | 1.1 | 7 | ns | Tamb = -40 °C to +125 °C; CL = 10 pF; VCC = 3.0 V to 3.6 V | 7 | |
| propagation delay A or B to Y | tpd | 2.4 | 17.4 | ns | Tamb = -40 °C to +125 °C; CL = 15 pF; VCC = 1.1 V to 1.3 V | 7 | |
| propagation delay A or B to Y | tpd | 1.9 | 11.1 | ns | Tamb = -40 °C to +125 °C; CL = 15 pF; VCC = 1.4 V to 1.6 V | 7 | |
| propagation delay A or B to Y | tpd | 1.7 | 9.3 | ns | Tamb = -40 °C to +125 °C; CL = 15 pF; VCC = 1.65 V to 1.95 V | 7 | |
| propagation delay A or B to Y | tpd | 1.5 | 6.9 | ns | Tamb = -40 °C to +125 °C; CL = 15 pF; VCC = 2.3 V to 2.7 V | 7 | |
| propagation delay A or B to Y | tpd | 1.4 | 9.1 | ns | Tamb = -40 °C to +125 °C; CL = 15 pF; VCC = 3.0 V to 3.6 V | 7 | |
| propagation delay A or B to Y | tpd | 3.2 | 24 | ns | Tamb = -40 °C to +125 °C; CL = 30 pF; VCC = 1.1 V to 1.3 V | 7 | |
| propagation delay A or B to Y | tpd | 2.6 | 15 | ns | Tamb = -40 °C to +125 °C; CL = 30 pF; VCC = 1.4 V to 1.6 V | 7 | |
| propagation delay A or B to Y | tpd | 2.3 | 14.6 | ns | Tamb = -40 °C to +125 °C; CL = 30 pF; VCC = 1.65 V to 1.95 V | 7 | |
| propagation delay A or B to Y | tpd | 2.1 | 10.9 | ns | Tamb = -40 °C to +125 °C; CL = 30 pF; VCC = 2.3 V to 2.7 V | 7 | |
| propagation delay A or B to Y | tpd | 2.1 | 15.3 | ns | Tamb = -40 °C to +125 °C; CL = 30 pF; VCC = 3.0 V to 3.6 V | 7 |
CAD (KiCad official)
- Symbol:
74AUP1G09GM - Footprint:
Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD - 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
- 3D model files:
74aup1g09gm-etched.step/74aup1g09gm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74aup1g09gm.step/74aup1g09gm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (17 pp, sha256
dc13ea80b782fb85, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).