Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

74AHCT595S16-13

Diodes Incorporated · 74 Series · SOP-16

74AHCT595S16-13 from Diodes Incorporated, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Q1 tri_state Parallel data output 1 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
2 Q2 tri_state Parallel data output 2 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
3 Q3 tri_state Parallel data output 3 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
4 Q4 tri_state Parallel data output 4 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
5 Q5 tri_state Parallel data output 5 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
6 Q6 tri_state Parallel data output 6 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
7 Q7 tri_state Parallel data output 7 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
8 GND power_in Ground reference for the device; unused inputs should be held at VCC or Ground.
9 Q7S output Serial data output from the last stage of the shift register, which shows the content of Q6S after a shift.
10 MR input Active-low master reset that clears the shift register to zero and is independent of all clocks.
11 SHCP input Shift register clock input; data on DS is shifted in on each positive transition.
12 STCP input Storage register clock input; a rising pulse transfers the shift register contents to the output register.
13 OE input Active-low output enable; when asserted low the 3-state outputs Q0-Q7 become active, and when HIGH they go to high-impedance Z.
14 DS input Serial data input to the 8-bit shift register, sampled on each positive transition of SHCP.
15 Q0 tri_state Parallel data output 0 of the 8-bit output register, placed in high-impedance (Z) state when OE is HIGH.
16 VCC power_in Supply voltage, recommended range 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOP-16
Category Logic ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VCC 4.5 5.5 V 4
Input Voltage Range VI 0 5.5 V 4
Output Voltage VO 0 V Active Mode; max VCC 4
Input transition rise or fall rate Δt/ΔV 20 ns/V VCC = 4.5V to 5.5V 4
Operating free-air temperature TA -40 125 °C 4
Supply Voltage Range VCC -0.5 7 V 4
Input Voltage Range VI -0.5 7 V 4
Voltage applied to output in high or low state Vo -0.5 V max VCC+0.5V 4
Input Clamp Current IIK -20 mA VI < -0.5V 4
Output Clamp Current IOK -20 mA VO < -0.5V 4
Output Clamp Current IOK 20 mA VO > VCC +0.5V 4
Continuous output current IO -25 25 mA 4
Continuous current through Vcc or GND ICC 75 mA 4
Continuous current through Vcc or GND IGND -75 mA 4
Operating Junction Temperature TJ -40 150 °C 4
Storage Temperature TSTG -65 150 °C 4
Total Power Dissipation PTOT 500 mW 4
Human Body Model ESD Protection ESD HBM 2 kV 4
Charged Device Model ESD Protection ESD CDM 1 kV 4
Machine Model ESD Protection ESD MM 200 V 4
High-Level Input Voltage VIH 2 V VCC 4.5V to 5.5V; TA = -40°C to +125°C 4
Low-Level Input Voltage VIL 0.8 V VCC 4.5V to 5.5V; TA = -40°C to +125°C 4
High-Level Output Voltage VOH 4.4 V IOH = -50μA; VCC 4.5V; TA = -40°C to +125°C 4
High-Level Output Voltage VOH 3.7 V IOH = -8mA; VCC 4.5V; TA = -40°C to +125°C 4
Low-Level Output Voltage VOL 0.1 V IOL = 50μA; VCC 4.5V; TA = -40°C to +125°C 4
Low-Level Output Voltage VOL 0.55 V IOL = 8mA; VCC 4.5V; TA = -40°C to +125°C 4
Input Current II -2 2 μA VI = GND to 5.5V; VCC 0 to 5.5V; TA = -40°C to +125°C 4
Z-state Leakage Current IOZ 10 μA VO = VCC or GND; OE HIGH; VCC 5.5V; TA = -40°C to +125°C 4
Supply Current ICC 80 μA VI = GND or VCC; IO = 0; VCC 5.5V; TA = -40°C to +125°C 4
Additional Supply Current per Input ΔICC 1.5 mA VI = VCC -2.1V; IO = 0; VCC 4.5V to 5.5V; TA = -40°C to +125°C 4
Input Capacitance Ci 4 10 pF Vi = VCC or GND; VCC 5.5V 4
Maximum Frequency fMAX 130 170 MHz SHCP or STCP; Figure 1; VCC 4.5V to 5.5V; TA = +25°C 5
Maximum Frequency fMAX 90 MHz SHCP or STCP; Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Pulse Width SHCP HIGH or LOW tW 5 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Pulse Width STCP HIGH or LOW tW 5 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Pulse Width MR LOW tW 5 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Set-up Time DS to SHCP tSU 3 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Set-up Time SHCP to STCP tSU 5 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Hold Time DS to SHCP tH 2 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Recovery Time MR to SHCP tREC 3 ns Figure 1; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Propagation Delay SHCP to Q7S tPD 1 10 ns Figure 1; CL = 15pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Propagation Delay SHCP to Q7S tPD 1 12 ns Figure 1; CL = 50pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Propagation Delay STCP to Qn tPD 1 9.5 ns Figure 1; CL = 15pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Propagation Delay STCP to Qn tPD 1 11.5 ns Figure 1; CL = 50pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Propagation Delay MR to Q7S tPD 1 10.5 ns Figure 1; CL = 15pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Propagation Delay MR to Q7S tPD 1 12.5 ns Figure 1; CL = 50pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Enable Time OE to Qn tEN 1 12 ns Figure 1; CL = 15pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Enable Time OE to Qn tEN 1 14.5 ns Figure 1; CL = 50pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Disable Time OE to Qn tDIS 1 9 ns Figure 1; CL = 15pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Disable Time OE to Qn tDIS 1 12 ns Figure 1; CL = 50pF; VCC 4.5V to 5.5V; TA = -40°C to +125°C 5
Supply Current ICC 4 μA VI = GND or VCC; IO = 0; VCC 5.5V; TA = +25°C 4

CAD (KiCad official)

  • Symbol: 74AHCT595S16-13
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: 74ahct595s16-13-etched.step / 74ahct595s16-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 74ahct595s16-13.step / 74ahct595s16-13.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (10 pp, sha256 4dc912eff08d0048, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF