main
Ray
Publish 0.1.0
ef57797
74AHCT1G125QW5-7
Diodes Incorporated · Buffers, Drivers, Receivers, Transceivers · SOT-25
74AHCT1G125QW5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: a HIGH level on OE places output Y in the high-impedance (Z) state, and inputs are Schmitt-trigger types that are not limited by VCC. |
| 2 | A | input | Data input with Schmitt-trigger action that tolerates slow rise and fall times and is not limited by VCC; unused inputs should be held at VCC or GND. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | Y | tri_state | 3-state data output that sources or sinks ±8 mA at 4.5 V (IOH = -8 mA, IOL = 8 mA maximum) and goes high impedance when OE is HIGH. |
| 5 | VCC | power_in | Supply voltage, specified from 4.5 V to 5.5 V operating, with absolute maximum rating of -0.5 V to 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | -0.5 | 6.5 | V | 2 | ||
| Input Voltage Range | VI | -0.5 | 6.5 | V | 2 | ||
| Voltage Applied to Output in High or Low State | VO | -0.5 | 5.5 | V | -0.5 to VCC + 0.5 V | 2 | |
| Input Clamp Current | IIK | -20 | mA | VI < 0 | 2 | ||
| Output Clamp Current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 2 | |
| Continuous Output Current | IO | -25 | 25 | mA | VO = 0 to VCC | 2 | |
| Continuous Current Through VCC | ICC | 75 | mA | 2 | |||
| Continuous Current Through GND | IGND | -75 | mA | 2 | |||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 2 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Total Power Dissipation | PD | 250 | mW | Note 6 | 2 | ||
| ESD HBM | ESD HBM | 2 | kV | Human Body Model | 2 | ||
| ESD CDM | ESD CDM | 1 | kV | Charged Device Model | 2 | ||
| Operating Voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| High-Level Input Voltage | VIH | 2 | V | VCC = 5V ± 0.5V | 3 | ||
| Low-Level Input Voltage | VIL | 0.8 | V | VCC = 5V ± 0.5V | 3 | ||
| Input Voltage | VI | 0 | 5.5 | V | 3 | ||
| Output Voltage | VO | 0 | 5.5 | V | 0 to VCC | 3 | |
| High-Level Output Current | IOH | -8 | mA | VCC = 5V ± 0.5V | 3 | ||
| Low-Level Output Current | IOL | 8 | mA | VCC = 5V ± 0.5V | 3 | ||
| Input Transition Rise or Fall Rate | Δt/ΔV | 20 | ns/V | VCC = 5V ± 0.5V | 3 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 3 | ||
| High Level Output Voltage | VOH | 4.4 | 4.5 | V | VI = VIH or VIL, IOH = -50μA, VCC = 4.5V, +25°C | 3 | |
| High Level Output Voltage | VOH | 4.4 | V | VI = VIH or VIL, IOH = -50μA, VCC = 4.5V, -40°C to +85°C | 3 | ||
| High Level Output Voltage | VOH | 3.94 | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, +25°C | 3 | ||
| High Level Output Voltage | VOH | 3.8 | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, -40°C to +85°C | 3 | ||
| High Level Output Voltage | VOH | 3.7 | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, -40°C to +125°C | 3 | ||
| Low Level Output Voltage | VOL | 0 | 0.1 | V | VI = VIH or VIL, IOL = 50μA, VCC = 4.5V, +25°C | 3 | |
| Low Level Output Voltage | VOL | 0.1 | V | VI = VIH or VIL, IOL = 50μA, VCC = 4.5V, -40°C to +85°C | 3 | ||
| Low Level Output Voltage | VOL | 0.36 | V | VI = VIH or VIL, IOL = 8mA, VCC = 4.5V, +25°C | 3 | ||
| Low Level Output Voltage | VOL | 0.44 | V | VI = VIH or VIL, IOL = 8mA, VCC = 4.5V, -40°C to +85°C | 3 | ||
| Low Level Output Voltage | VOL | 0.55 | V | VI = VIH or VIL, IOL = 8mA, VCC = 4.5V, -40°C to +125°C | 3 | ||
| Z State Leakage Current | IOZ | 0.25 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, +25°C | 3 | ||
| Z State Leakage Current | IOZ | 2.5 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, -40°C to +85°C | 3 | ||
| Z State Leakage Current | IOZ | 10 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, -40°C to +125°C | 3 | ||
| Input Current | II | -0.1 | 0.1 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, +25°C | 3 | |
| Input Current | II | -1 | 1 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, -40°C to +85°C | 3 | |
| Input Current | II | -2 | 2 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, -40°C to +125°C | 3 | |
| Additional Supply Current | ΔICC | 1.35 | mA | Per input pin; VI = 3.4V; other inputs at VCC or GND; IO = 0; VCC = 5.5V, +25°C | 3 | ||
| Additional Supply Current | ΔICC | 1.5 | mA | Per input pin; VI = 3.4V; other inputs at VCC or GND; IO = 0; VCC = 5.5V, -40°C to +85°C | 3 | ||
| Supply Current | ICC | 1 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, +25°C | 3 | ||
| Supply Current | ICC | 10 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, -40°C to +85°C | 3 | ||
| Supply Current | ICC | 40 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, -40°C to +125°C | 3 | ||
| Input Capacitance | CI | 1.5 | 10 | pF | VI = VCC or GND, VCC = 5.5V, +25°C | 3 | |
| Input Capacitance | CI | 10 | pF | VI = VCC or GND, VCC = 5.5V, -40°C to +125°C | 3 | ||
| Propagation Delay A to Y | tPD | 1 | 3.4 | 5.5 | ns | CL = 15pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Propagation Delay A to Y | tPD | 1 | 6.5 | ns | CL = 15pF, -40°C to +85°C | 4 | |
| Propagation Delay A to Y | tPD | 1 | 7 | ns | CL = 15pF, -40°C to +125°C | 4 | |
| Propagation Delay A to Y | tPD | 1 | 4.8 | 7.5 | ns | CL = 50pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Propagation Delay A to Y | tPD | 1 | 8.5 | ns | CL = 50pF, -40°C to +85°C | 4 | |
| Propagation Delay A to Y | tPD | 1 | 9.5 | ns | CL = 50pF, -40°C to +125°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 3.9 | 5.1 | ns | CL = 15pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Enable Time OE to Y | tEN | 1 | 6 | ns | CL = 15pF, -40°C to +85°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 6.5 | ns | CL = 15pF, -40°C to +125°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 5.1 | 7.5 | ns | CL = 50pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Enable Time OE to Y | tEN | 1 | 8.5 | ns | CL = 50pF, -40°C to +85°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 9.5 | ns | CL = 50pF, -40°C to +125°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 4.5 | 6.8 | ns | CL = 15pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Disable Time OE to Y | tDIS | 1 | 8 | ns | CL = 15pF, -40°C to +85°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 8.5 | ns | CL = 15pF, -40°C to +125°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 6.1 | 8.8 | ns | CL = 50pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Disable Time OE to Y | tDIS | 1 | 10 | ns | CL = 50pF, -40°C to +85°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 11 | ns | CL = 50pF, -40°C to +125°C | 4 | |
| Thermal Resistance Junction-to-Ambient | θJA | 184 | °C/W | SOT25, Note 8 | 4 | ||
| Thermal Resistance Junction-to-Case | θJC | 62 | °C/W | SOT25, Note 8 | 4 | ||
| Power Dissipation Capacitance | CPD | 11 | pF | VCC = 5.0V, f = 1MHz, CL = 50pF, VI = GND to VCC, TA = +25°C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.0158 grams (Approximate) | 8 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
74AHCT1G125QW5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
74ahct1g125qw5-7-etched.step/74ahct1g125qw5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74ahct1g125qw5-7.step/74ahct1g125qw5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (9 pp, sha256
39a8d5b99c73aab4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# 74AHCT1G125QW5-7
**Diodes Incorporated** · Buffers, Drivers, Receivers, Transceivers · SOT-25
74AHCT1G125QW5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input: a HIGH level on OE places output Y in the high-impedance (Z) state, and inputs are Schmitt-trigger types that are not limited by VCC. |
| 2 | A | input | Data input with Schmitt-trigger action that tolerates slow rise and fall times and is not limited by VCC; unused inputs should be held at VCC or GND. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | Y | tri_state | 3-state data output that sources or sinks ±8 mA at 4.5 V (IOH = -8 mA, IOL = 8 mA maximum) and goes high impedance when OE is HIGH. |
| 5 | VCC | power_in | Supply voltage, specified from 4.5 V to 5.5 V operating, with absolute maximum rating of -0.5 V to 6.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Logic |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | -0.5 | | 6.5 | V | | 2 |
| Input Voltage Range | VI | -0.5 | | 6.5 | V | | 2 |
| Voltage Applied to Output in High or Low State | VO | -0.5 | | 5.5 | V | -0.5 to VCC + 0.5 V | 2 |
| Input Clamp Current | IIK | -20 | | | mA | VI < 0 | 2 |
| Output Clamp Current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 2 |
| Continuous Output Current | IO | -25 | | 25 | mA | VO = 0 to VCC | 2 |
| Continuous Current Through VCC | ICC | | | 75 | mA | | 2 |
| Continuous Current Through GND | IGND | -75 | | | mA | | 2 |
| Operating Junction Temperature | TJ | -40 | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 2 |
| Total Power Dissipation | PD | | | 250 | mW | Note 6 | 2 |
| ESD HBM | ESD HBM | | | 2 | kV | Human Body Model | 2 |
| ESD CDM | ESD CDM | | | 1 | kV | Charged Device Model | 2 |
| Operating Voltage | VCC | 4.5 | | 5.5 | V | | 3 |
| High-Level Input Voltage | VIH | 2 | | | V | VCC = 5V ± 0.5V | 3 |
| Low-Level Input Voltage | VIL | | | 0.8 | V | VCC = 5V ± 0.5V | 3 |
| Input Voltage | VI | 0 | | 5.5 | V | | 3 |
| Output Voltage | VO | 0 | | 5.5 | V | 0 to VCC | 3 |
| High-Level Output Current | IOH | | | -8 | mA | VCC = 5V ± 0.5V | 3 |
| Low-Level Output Current | IOL | | | 8 | mA | VCC = 5V ± 0.5V | 3 |
| Input Transition Rise or Fall Rate | Δt/ΔV | | | 20 | ns/V | VCC = 5V ± 0.5V | 3 |
| Ambient Temperature | TA | -40 | | 125 | °C | | 3 |
| High Level Output Voltage | VOH | 4.4 | 4.5 | | V | VI = VIH or VIL, IOH = -50μA, VCC = 4.5V, +25°C | 3 |
| High Level Output Voltage | VOH | 4.4 | | | V | VI = VIH or VIL, IOH = -50μA, VCC = 4.5V, -40°C to +85°C | 3 |
| High Level Output Voltage | VOH | 3.94 | | | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, +25°C | 3 |
| High Level Output Voltage | VOH | 3.8 | | | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, -40°C to +85°C | 3 |
| High Level Output Voltage | VOH | 3.7 | | | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, -40°C to +125°C | 3 |
| Low Level Output Voltage | VOL | | 0 | 0.1 | V | VI = VIH or VIL, IOL = 50μA, VCC = 4.5V, +25°C | 3 |
| Low Level Output Voltage | VOL | | | 0.1 | V | VI = VIH or VIL, IOL = 50μA, VCC = 4.5V, -40°C to +85°C | 3 |
| Low Level Output Voltage | VOL | | | 0.36 | V | VI = VIH or VIL, IOL = 8mA, VCC = 4.5V, +25°C | 3 |
| Low Level Output Voltage | VOL | | | 0.44 | V | VI = VIH or VIL, IOL = 8mA, VCC = 4.5V, -40°C to +85°C | 3 |
| Low Level Output Voltage | VOL | | | 0.55 | V | VI = VIH or VIL, IOL = 8mA, VCC = 4.5V, -40°C to +125°C | 3 |
| Z State Leakage Current | IOZ | | | 0.25 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, +25°C | 3 |
| Z State Leakage Current | IOZ | | | 2.5 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, -40°C to +85°C | 3 |
| Z State Leakage Current | IOZ | | | 10 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, -40°C to +125°C | 3 |
| Input Current | II | -0.1 | | 0.1 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, +25°C | 3 |
| Input Current | II | -1 | | 1 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, -40°C to +85°C | 3 |
| Input Current | II | -2 | | 2 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, -40°C to +125°C | 3 |
| Additional Supply Current | ΔICC | | | 1.35 | mA | Per input pin; VI = 3.4V; other inputs at VCC or GND; IO = 0; VCC = 5.5V, +25°C | 3 |
| Additional Supply Current | ΔICC | | | 1.5 | mA | Per input pin; VI = 3.4V; other inputs at VCC or GND; IO = 0; VCC = 5.5V, -40°C to +85°C | 3 |
| Supply Current | ICC | | | 1 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, +25°C | 3 |
| Supply Current | ICC | | | 10 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, -40°C to +85°C | 3 |
| Supply Current | ICC | | | 40 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, -40°C to +125°C | 3 |
| Input Capacitance | CI | | 1.5 | 10 | pF | VI = VCC or GND, VCC = 5.5V, +25°C | 3 |
| Input Capacitance | CI | | | 10 | pF | VI = VCC or GND, VCC = 5.5V, -40°C to +125°C | 3 |
| Propagation Delay A to Y | tPD | 1 | 3.4 | 5.5 | ns | CL = 15pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 6.5 | ns | CL = 15pF, -40°C to +85°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 7 | ns | CL = 15pF, -40°C to +125°C | 4 |
| Propagation Delay A to Y | tPD | 1 | 4.8 | 7.5 | ns | CL = 50pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 8.5 | ns | CL = 50pF, -40°C to +85°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 9.5 | ns | CL = 50pF, -40°C to +125°C | 4 |
| Enable Time OE to Y | tEN | 1 | 3.9 | 5.1 | ns | CL = 15pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 6 | ns | CL = 15pF, -40°C to +85°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 6.5 | ns | CL = 15pF, -40°C to +125°C | 4 |
| Enable Time OE to Y | tEN | 1 | 5.1 | 7.5 | ns | CL = 50pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 8.5 | ns | CL = 50pF, -40°C to +85°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 9.5 | ns | CL = 50pF, -40°C to +125°C | 4 |
| Disable Time OE to Y | tDIS | 1 | 4.5 | 6.8 | ns | CL = 15pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 8 | ns | CL = 15pF, -40°C to +85°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 8.5 | ns | CL = 15pF, -40°C to +125°C | 4 |
| Disable Time OE to Y | tDIS | 1 | 6.1 | 8.8 | ns | CL = 50pF, VCC = 5V ± 0.5V, +25°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 10 | ns | CL = 50pF, -40°C to +85°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 11 | ns | CL = 50pF, -40°C to +125°C | 4 |
| Thermal Resistance Junction-to-Ambient | θJA | | 184 | | °C/W | SOT25, Note 8 | 4 |
| Thermal Resistance Junction-to-Case | θJC | | 62 | | °C/W | SOT25, Note 8 | 4 |
| Power Dissipation Capacitance | CPD | | 11 | | pF | VCC = 5.0V, f = 1MHz, CL = 50pF, VI = GND to VCC, TA = +25°C | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.0158 grams (Approximate) | 8 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `74AHCT1G125QW5-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `74ahct1g125qw5-7-etched.step` / `74ahct1g125qw5-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74ahct1g125qw5-7.step` / `74ahct1g125qw5-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/74AHCT1G125QW5-7.pdf) (9 pp, sha256 `39a8d5b99c73aab4`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/74ahct1g125qw5-7-datasheet.pdf)