← Commit history

Initial commit: component/74ahc273pw

Ray ·a078d31e31 ·
2 files changed +269
README.mdadded+56
@@ -0,0 +1,56 @@+# 74AHC273PW++**Nexperia** · Flip Flops · TSSOP-20++74AHC273PW from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MR | input | Master reset input (active LOW); forces all Q outputs LOW regardless of clock and data inputs. |+| 2 | Q0 | output | Flip-flop output Q0; transfers D0 state on positive clock edge. |+| 3 | D0 | input | Data input D0; requires 3.0 ns setup time and 1.0 ns hold time. |+| 4 | D1 | input | Data input D1; requires 3.0 ns setup time and 1.0 ns hold time. |+| 5 | Q1 | output | Flip-flop output Q1; transfers D1 state on positive clock edge. |+| 6 | Q2 | output | Flip-flop output Q2; transfers D2 state on positive clock edge. |+| 7 | D2 | input | Data input D2; requires 3.0 ns setup time and 1.0 ns hold time. |+| 8 | D3 | input | Data input D3; requires 3.0 ns setup time and 1.0 ns hold time. |+| 9 | Q3 | output | Flip-flop output Q3; transfers D3 state on positive clock edge. |+| 10 | GND | power_in | Ground (0 V). |+| 11 | CP | input | Clock input; positive edge-triggered with 5.0 ns minimum pulse width. |+| 12 | Q4 | output | Flip-flop output Q4; transfers D4 state on positive clock edge. |+| 13 | D4 | input | Data input D4; requires 3.0 ns setup time and 1.0 ns hold time. |+| 14 | D5 | input | Data input D5; requires 3.0 ns setup time and 1.0 ns hold time. |+| 15 | Q5 | output | Flip-flop output Q5; transfers D5 state on positive clock edge. |+| 16 | Q6 | output | Flip-flop output Q6; transfers D6 state on positive clock edge. |+| 17 | D6 | input | Data input D6; requires 3.0 ns setup time and 1.0 ns hold time. |+| 18 | D7 | input | Data input D7; requires 3.0 ns setup time and 1.0 ns hold time. |+| 19 | Q7 | output | Flip-flop output Q7; transfers D7 state on positive clock edge. |+| 20 | VCC | power_in | Supply voltage; 2.0 to 5.5 V recommended operating range. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nexperia |+| Package | TSSOP-20 |+| Category | Logic |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `74AHC273PW`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `74ahc273pw-etched.step` / `74ahc273pw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74ahc273pw.step` / `74ahc273pw.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nexperia datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904775920594944) (16 pp, sha256 `dfa9bcf88bfd3ff7`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/74ahc273pw-datasheet.pdf)
page.jsonadded+213
@@ -0,0 +1,213 @@+{+  "slug": "74ahc273pw",+  "version": "0.1.0",+  "type": "component",+  "description": "Nexperia Flip Flops, TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "74ahc273pw",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "74ahc273pw.kicad_sym",+    "74ahc273pw.kicad_mod",+    "74ahc273pw.glb",+    "74ahc273pw.step",+    "74ahc273pw.lbr",+    "docs/hero.png",+    "docs/74ahc273pw-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "74AHC273PW",+    "manufacturer": "Nexperia",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904775920594944",+    "parts": {+      "symbol": "74ahc273pw.kicad_sym",+      "footprint": "74ahc273pw.kicad_mod",+      "model_3d": "74ahc273pw-etched.glb",+      "model_3d_plain": "74ahc273pw.glb",+      "model_3d_step": "74ahc273pw-etched.step",+      "model_3d_step_plain": "74ahc273pw.step",+      "lbr": "74ahc273pw.lbr"+    },+    "distributor_links": {+      "lcsc": "C554347"+    },+    "pins": [+      {+        "number": "1",+        "name": "MR",+        "type": "input",+        "description": "Master reset input (active LOW); forces all Q outputs LOW regardless of clock and data inputs."+      },+      {+        "number": "2",+        "name": "Q0",+        "type": "output",+        "description": "Flip-flop output Q0; transfers D0 state on positive clock edge."+      },+      {+        "number": "3",+        "name": "D0",+        "type": "input",+        "description": "Data input D0; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "4",+        "name": "D1",+        "type": "input",+        "description": "Data input D1; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "5",+        "name": "Q1",+        "type": "output",+        "description": "Flip-flop output Q1; transfers D1 state on positive clock edge."+      },+      {+        "number": "6",+        "name": "Q2",+        "type": "output",+        "description": "Flip-flop output Q2; transfers D2 state on positive clock edge."+      },+      {+        "number": "7",+        "name": "D2",+        "type": "input",+        "description": "Data input D2; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "8",+        "name": "D3",+        "type": "input",+        "description": "Data input D3; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "9",+        "name": "Q3",+        "type": "output",+        "description": "Flip-flop output Q3; transfers D3 state on positive clock edge."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground (0 V)."+      },+      {+        "number": "11",+        "name": "CP",+        "type": "input",+        "description": "Clock input; positive edge-triggered with 5.0 ns minimum pulse width."+      },+      {+        "number": "12",+        "name": "Q4",+        "type": "output",+        "description": "Flip-flop output Q4; transfers D4 state on positive clock edge."+      },+      {+        "number": "13",+        "name": "D4",+        "type": "input",+        "description": "Data input D4; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "14",+        "name": "D5",+        "type": "input",+        "description": "Data input D5; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "15",+        "name": "Q5",+        "type": "output",+        "description": "Flip-flop output Q5; transfers D5 state on positive clock edge."+      },+      {+        "number": "16",+        "name": "Q6",+        "type": "output",+        "description": "Flip-flop output Q6; transfers D6 state on positive clock edge."+      },+      {+        "number": "17",+        "name": "D6",+        "type": "input",+        "description": "Data input D6; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "18",+        "name": "D7",+        "type": "input",+        "description": "Data input D7; requires 3.0 ns setup time and 1.0 ns hold time."+      },+      {+        "number": "19",+        "name": "Q7",+        "type": "output",+        "description": "Flip-flop output Q7; transfers D7 state on positive clock edge."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; 2.0 to 5.5 V recommended operating range."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 16,+        "cost_usd": 0.2123,+        "at": "2026-09-22T12:29:12"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588904775920594944",+        "pages": 16,+        "sha256": "dfa9bcf88bfd3ff7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file