component
74AHC245PW-Q100J
Public Made by Adomby adom
Nexperia Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
74AHC245PW-Q100J
Nexperia · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
74AHC245PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input that sets the transfer direction between the A and B ports while OE is LOW, per the function table. |
| 2 | A0 | bidirectional | Data input/output port A0 that goes to high-impedance OFF-state when OE is HIGH. |
| 3 | A1 | bidirectional | Data input/output port A1 that goes to high-impedance OFF-state when OE is HIGH. |
| 4 | A2 | bidirectional | Data input/output port A2 that goes to high-impedance OFF-state when OE is HIGH. |
| 5 | A3 | bidirectional | Data input/output port A3 that goes to high-impedance OFF-state when OE is HIGH. |
| 6 | A4 | bidirectional | Data input/output port A4 that goes to high-impedance OFF-state when OE is HIGH. |
| 7 | A5 | bidirectional | Data input/output port A5 that goes to high-impedance OFF-state when OE is HIGH. |
| 8 | A6 | bidirectional | Data input/output port A6 that goes to high-impedance OFF-state when OE is HIGH. |
| 9 | A7 | bidirectional | Data input/output port A7 that goes to high-impedance OFF-state when OE is HIGH. |
| 10 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 11 | B7 | bidirectional | Data input/output port B7 that goes to high-impedance OFF-state when OE is HIGH. |
| 12 | B6 | bidirectional | Data input/output port B6 that goes to high-impedance OFF-state when OE is HIGH. |
| 13 | B5 | bidirectional | Data input/output port B5 that goes to high-impedance OFF-state when OE is HIGH. |
| 14 | B4 | bidirectional | Data input/output port B4 that goes to high-impedance OFF-state when OE is HIGH. |
| 15 | B3 | bidirectional | Data input/output port B3 that goes to high-impedance OFF-state when OE is HIGH. |
| 16 | B2 | bidirectional | Data input/output port B2 that goes to high-impedance OFF-state when OE is HIGH. |
| 17 | B1 | bidirectional | Data input/output port B1 that goes to high-impedance OFF-state when OE is HIGH. |
| 18 | B0 | bidirectional | Data input/output port B0 that goes to high-impedance OFF-state when OE is HIGH. |
| 19 | OE | input | Output enable input, active LOW; a HIGH forces all data outputs into the high-impedance OFF-state. |
| 20 | VCC | power_in | Supply voltage: 2.0 V to 5.5 V for 74AHC245-Q100 and 4.5 V to 5.5 V for 74AHCT245-Q100. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | 2 | 5 | 5.5 | V | 4 | |
| input voltage | VI | 0 | 5.5 | V | 4 | ||
| output voltage | VO | 0 | V | max printed as VCC | 4 | ||
| ambient temperature | Tamb | -40 | 25 | 125 | °C | 4 | |
| input transition rise and fall rate | Δt/ΔV | 100 | ns/V | VCC = 3.3 V ± 0.3 V | 4 | ||
| input transition rise and fall rate | Δt/ΔV | 20 | ns/V | VCC = 5.0 V ± 0.5 V | 4 | ||
| supply voltage | VCC | -0.5 | 7 | V | 4 | ||
| input voltage | VI | -0.5 | 7 | V | 4 | ||
| input clamping current | IIK | -20 | mA | VI < -0.5 V | 4 | ||
| output clamping current | IOK | -20 | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 | |
| output current | IO | -25 | 25 | mA | VO = -0.5 V to (VCC + 0.5 V) | 4 | |
| supply current | ICC | 75 | mA | 4 | |||
| ground current | IGND | -75 | mA | 4 | |||
| storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| total power dissipation | Ptot | 500 | mW | Tamb = -40 °C to +125 °C | 4 | ||
| HIGH-level input voltage | VIH | 1.5 | V | VCC = 2.0 V; min over -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 2.1 | V | VCC = 3.0 V; min over -40 °C to +125 °C | 5 | ||
| HIGH-level input voltage | VIH | 3.85 | V | VCC = 5.5 V; min over -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.5 | V | VCC = 2.0 V; max over -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 0.9 | V | VCC = 3.0 V; max over -40 °C to +125 °C | 5 | ||
| LOW-level input voltage | VIL | 1.65 | V | VCC = 5.5 V; max over -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 1.9 | 2 | V | VI = VIH or VIL; IO = -50 μA; VCC = 2.0 V; min over -40 °C to +125 °C, typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 2.9 | 3 | V | VI = VIH or VIL; IO = -50 μA; VCC = 3.0 V; min over -40 °C to +125 °C, typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | V | VI = VIH or VIL; IO = -50 μA; VCC = 4.5 V; min over -40 °C to +125 °C, typ at 25 °C | 5 | |
| HIGH-level output voltage | VOH | 2.4 | V | VI = VIH or VIL; IO = -4.0 mA; VCC = 3.0 V; min over -40 °C to +125 °C | 5 | ||
| HIGH-level output voltage | VOH | 3.7 | V | VI = VIH or VIL; IO = -8.0 mA; VCC = 4.5 V; min over -40 °C to +125 °C | 5 | ||
| LOW-level output voltage | VOL | 0 | 0.1 | V | VI = VIH or VIL; IO = 50 μA; VCC = 2.0 V; max over -40 °C to +125 °C, typ at 25 °C | 5 | |
| LOW-level output voltage | VOL | 0.55 | V | VI = VIH or VIL; IO = 4.0 mA; VCC = 3.0 V; max over -40 °C to +125 °C | 5 | ||
| input leakage current | II | 2 | μA | VI = 5.5 V or GND; VCC = 0 V to 5.5 V; max over -40 °C to +125 °C | 5 | ||
| OFF-state output current | IOZ | -10 | 10 | μA | VI = VIH or VIL; VO = VCC or GND; VCC = 5.5 V; over -40 °C to +125 °C | 5 | |
| supply current | ICC | 80 | μA | VI = VCC or GND; IO = 0 A; VCC = 5.5 V; max over -40 °C to +125 °C | 5 | ||
| input capacitance | CI | 3 | 10 | pF | VI = VCC or GND; max over -40 °C to +125 °C, typ at 25 °C | 5 | |
| propagation delay An to Bn; Bn to An | tpd | 1 | 5 | 10.5 | ns | VCC = 3.0 V to 3.6 V; CL = 15 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 6.5 | 15 | ns | VCC = 3.0 V to 3.6 V; CL = 50 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 3.5 | 7 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 5 | 9.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 6.5 | 16.5 | ns | VCC = 3.0 V to 3.6 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 9 | 21 | ns | VCC = 3.0 V to 3.6 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 4 | 11 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 5 | 13.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 7.5 | 16 | ns | VCC = 3.0 V to 3.6 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 10 | 20 | ns | VCC = 3.0 V to 3.6 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 4.5 | 10 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 6 | 12.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| total power dissipation derating (SOT360-1 TSSOP20) | Ptot | 10 | mW/K | derates linearly above 100 °C | 4 |
CAD (KiCad official)
- Symbol:
74AHC245PW-Q100J - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
74ahc245pw-q100j-etched.step/74ahc245pw-q100j-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74ahc245pw-q100j.step/74ahc245pw-q100j.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (16 pp, sha256
571b7aa15f496d1d, retrieved 2026-10-21, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74AHC245PW-Q100J
**Nexperia** · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
74AHC245PW-Q100J from Nexperia, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input that sets the transfer direction between the A and B ports while OE is LOW, per the function table. |
| 2 | A0 | bidirectional | Data input/output port A0 that goes to high-impedance OFF-state when OE is HIGH. |
| 3 | A1 | bidirectional | Data input/output port A1 that goes to high-impedance OFF-state when OE is HIGH. |
| 4 | A2 | bidirectional | Data input/output port A2 that goes to high-impedance OFF-state when OE is HIGH. |
| 5 | A3 | bidirectional | Data input/output port A3 that goes to high-impedance OFF-state when OE is HIGH. |
| 6 | A4 | bidirectional | Data input/output port A4 that goes to high-impedance OFF-state when OE is HIGH. |
| 7 | A5 | bidirectional | Data input/output port A5 that goes to high-impedance OFF-state when OE is HIGH. |
| 8 | A6 | bidirectional | Data input/output port A6 that goes to high-impedance OFF-state when OE is HIGH. |
| 9 | A7 | bidirectional | Data input/output port A7 that goes to high-impedance OFF-state when OE is HIGH. |
| 10 | GND | power_in | Ground (0 V) reference for all voltages on the device. |
| 11 | B7 | bidirectional | Data input/output port B7 that goes to high-impedance OFF-state when OE is HIGH. |
| 12 | B6 | bidirectional | Data input/output port B6 that goes to high-impedance OFF-state when OE is HIGH. |
| 13 | B5 | bidirectional | Data input/output port B5 that goes to high-impedance OFF-state when OE is HIGH. |
| 14 | B4 | bidirectional | Data input/output port B4 that goes to high-impedance OFF-state when OE is HIGH. |
| 15 | B3 | bidirectional | Data input/output port B3 that goes to high-impedance OFF-state when OE is HIGH. |
| 16 | B2 | bidirectional | Data input/output port B2 that goes to high-impedance OFF-state when OE is HIGH. |
| 17 | B1 | bidirectional | Data input/output port B1 that goes to high-impedance OFF-state when OE is HIGH. |
| 18 | B0 | bidirectional | Data input/output port B0 that goes to high-impedance OFF-state when OE is HIGH. |
| 19 | OE | input | Output enable input, active LOW; a HIGH forces all data outputs into the high-impedance OFF-state. |
| 20 | VCC | power_in | Supply voltage: 2.0 V to 5.5 V for 74AHC245-Q100 and 4.5 V to 5.5 V for 74AHCT245-Q100. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage | VCC | 2 | 5 | 5.5 | V | | 4 |
| input voltage | VI | 0 | | 5.5 | V | | 4 |
| output voltage | VO | 0 | | | V | max printed as VCC | 4 |
| ambient temperature | Tamb | -40 | 25 | 125 | °C | | 4 |
| input transition rise and fall rate | Δt/ΔV | | | 100 | ns/V | VCC = 3.3 V ± 0.3 V | 4 |
| input transition rise and fall rate | Δt/ΔV | | | 20 | ns/V | VCC = 5.0 V ± 0.5 V | 4 |
| supply voltage | VCC | -0.5 | | 7 | V | | 4 |
| input voltage | VI | -0.5 | | 7 | V | | 4 |
| input clamping current | IIK | -20 | | | mA | VI < -0.5 V | 4 |
| output clamping current | IOK | -20 | | 20 | mA | VO < -0.5 V or VO > VCC + 0.5 V | 4 |
| output current | IO | -25 | | 25 | mA | VO = -0.5 V to (VCC + 0.5 V) | 4 |
| supply current | ICC | | | 75 | mA | | 4 |
| ground current | IGND | -75 | | | mA | | 4 |
| storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| total power dissipation | Ptot | | | 500 | mW | Tamb = -40 °C to +125 °C | 4 |
| HIGH-level input voltage | VIH | 1.5 | | | V | VCC = 2.0 V; min over -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 2.1 | | | V | VCC = 3.0 V; min over -40 °C to +125 °C | 5 |
| HIGH-level input voltage | VIH | 3.85 | | | V | VCC = 5.5 V; min over -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.5 | V | VCC = 2.0 V; max over -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 0.9 | V | VCC = 3.0 V; max over -40 °C to +125 °C | 5 |
| LOW-level input voltage | VIL | | | 1.65 | V | VCC = 5.5 V; max over -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 1.9 | 2 | | V | VI = VIH or VIL; IO = -50 μA; VCC = 2.0 V; min over -40 °C to +125 °C, typ at 25 °C | 5 |
| HIGH-level output voltage | VOH | 2.9 | 3 | | V | VI = VIH or VIL; IO = -50 μA; VCC = 3.0 V; min over -40 °C to +125 °C, typ at 25 °C | 5 |
| HIGH-level output voltage | VOH | 4.4 | 4.5 | | V | VI = VIH or VIL; IO = -50 μA; VCC = 4.5 V; min over -40 °C to +125 °C, typ at 25 °C | 5 |
| HIGH-level output voltage | VOH | 2.4 | | | V | VI = VIH or VIL; IO = -4.0 mA; VCC = 3.0 V; min over -40 °C to +125 °C | 5 |
| HIGH-level output voltage | VOH | 3.7 | | | V | VI = VIH or VIL; IO = -8.0 mA; VCC = 4.5 V; min over -40 °C to +125 °C | 5 |
| LOW-level output voltage | VOL | | 0 | 0.1 | V | VI = VIH or VIL; IO = 50 μA; VCC = 2.0 V; max over -40 °C to +125 °C, typ at 25 °C | 5 |
| LOW-level output voltage | VOL | | | 0.55 | V | VI = VIH or VIL; IO = 4.0 mA; VCC = 3.0 V; max over -40 °C to +125 °C | 5 |
| input leakage current | II | | | 2 | μA | VI = 5.5 V or GND; VCC = 0 V to 5.5 V; max over -40 °C to +125 °C | 5 |
| OFF-state output current | IOZ | -10 | | 10 | μA | VI = VIH or VIL; VO = VCC or GND; VCC = 5.5 V; over -40 °C to +125 °C | 5 |
| supply current | ICC | | | 80 | μA | VI = VCC or GND; IO = 0 A; VCC = 5.5 V; max over -40 °C to +125 °C | 5 |
| input capacitance | CI | | 3 | 10 | pF | VI = VCC or GND; max over -40 °C to +125 °C, typ at 25 °C | 5 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 5 | 10.5 | ns | VCC = 3.0 V to 3.6 V; CL = 15 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 6.5 | 15 | ns | VCC = 3.0 V to 3.6 V; CL = 50 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 3.5 | 7 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| propagation delay An to Bn; Bn to An | tpd | 1 | 5 | 9.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; see Fig. 3; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 6.5 | 16.5 | ns | VCC = 3.0 V to 3.6 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 9 | 21 | ns | VCC = 3.0 V to 3.6 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 4 | 11 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| enable time OE to An; OE to Bn | ten | 1 | 5 | 13.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 7.5 | 16 | ns | VCC = 3.0 V to 3.6 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 10 | 20 | ns | VCC = 3.0 V to 3.6 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 4.5 | 10 | ns | VCC = 4.5 V to 5.5 V; CL = 15 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| disable time OE to An; OE to Bn | tdis | 1 | 6 | 12.5 | ns | VCC = 4.5 V to 5.5 V; CL = 50 pF; see Fig. 4; min/max over -40 °C to +125 °C, typ at 25 °C | 7 |
| total power dissipation derating (SOT360-1 TSSOP20) | Ptot | | 10 | | mW/K | derates linearly above 100 °C | 4 |
## CAD (KiCad official)
- Symbol: `74AHC245PW-Q100J`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `74ahc245pw-q100j-etched.step` / `74ahc245pw-q100j-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74ahc245pw-q100j.step` / `74ahc245pw-q100j.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nexperia datasheet](https://assets.nexperia.com/documents/data-sheet/74AHC245PW-Q100J.pdf) (16 pp, sha256 `571b7aa15f496d1d`, retrieved 2026-10-21, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74ahc245pw-q100j-datasheet.pdf)