main
Ray
Publish 0.1.0
341b065
74AHC1G126QW5-7
Diodes Incorporated · Buffer/Driver/Transceiver · SOT-25
74AHC1G126QW5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output Enable, active-high: the output Y enters high impedance (Z) when OE is LOW, and Y follows A when OE is HIGH. |
| 2 | A | input | Data input with Schmitt trigger action, not limited by VCC (VI 0 to 5.5V recommended), and unused inputs should be held at VCC or ground. |
| 3 | GND | power_in | Ground pin, with a maximum continuous current through GND of -75 mA. |
| 4 | Y | tri_state | 3-state data output that drives ±8mA at VCC = 4.5V and is high impedance when OE is LOW. |
| 5 | VCC | power_in | Supply voltage pin, with a recommended operating range of 2V to 5.5V and an absolute maximum of -0.5 to 6.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Logic ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | -0.5 | 6.5 | V | 2 | ||
| Input Voltage Range | VI | -0.5 | 6.5 | V | 2 | ||
| Voltage Applied to Output in High or Low State | VO | -0.5 | V | -0.5 to VCC + 0.5 | 2 | ||
| Input Clamp Current | IIK | -20 | mA | VI < 0 | 2 | ||
| Output Clamp Current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 2 | |
| Continuous Output Current | IO | -25 | 25 | mA | VO = 0 to VCC | 2 | |
| Continuous Current Through VCC | ICC | 75 | mA | 2 | |||
| Continuous Current Through GND | IGND | -75 | mA | 2 | |||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 2 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Total Power Dissipation | PD | 250 | mW | Note 6 | 2 | ||
| ESD Protection Human Body Model | ESD HBM | 2 | kV | 2 | |||
| ESD Protection Charged Device Model | ESD CDM | 1 | kV | 2 | |||
| Operating Voltage | VCC | 2 | 5.5 | V | 3 | ||
| High-Level Input Voltage | VIH | 1.5 | V | VCC = 2V | 3 | ||
| High-Level Input Voltage | VIH | 2.1 | V | VCC = 3V | 3 | ||
| High-Level Input Voltage | VIH | 3.85 | V | VCC = 5.5V | 3 | ||
| Low-Level Input Voltage | VIL | 0.5 | V | VCC = 2V | 3 | ||
| Low-Level Input Voltage | VIL | 0.9 | V | VCC = 3V | 3 | ||
| Low-Level Input Voltage | VIL | 1.65 | V | VCC = 5.5V | 3 | ||
| Input Voltage | VI | 0 | 5.5 | V | 3 | ||
| Output Voltage | VO | 0 | V | 0 to VCC | 3 | ||
| High-Level Output Current | IOH | -50 | µA | VCC = 2V | 3 | ||
| High-Level Output Current | IOH | -4 | mA | VCC = 3.3V ± 0.3V | 3 | ||
| High-Level Output Current | IOH | -8 | mA | VCC = 5V ± 0.5V | 3 | ||
| Low-Level Output Current | IOL | 50 | µA | VCC = 2V | 3 | ||
| Low-Level Output Current | IOL | 4 | mA | VCC = 3.3V ± 0.3V | 3 | ||
| Low-Level Output Current | IOL | 8 | mA | VCC = 5V ± 0.5V | 3 | ||
| Input Transition Rise or Fall Rate | Δt/ΔV | 100 | ns/V | VCC = 3.3V ± 0.3V | 3 | ||
| Input Transition Rise or Fall Rate | Δt/ΔV | 20 | ns/V | VCC = 5V ± 0.5V | 3 | ||
| Operating Free-Air Temperature | TA | -40 | 125 | °C | 3 | ||
| High Level Output Voltage | VOH | 1.9 | V | VI = VIH or VIL, IOH = -50μA, VCC = 2V, -40°C to +125°C | 3 | ||
| High Level Output Voltage | VOH | 2.9 | V | VI = VIH or VIL, IOH = -50μA, VCC = 3V, -40°C to +125°C | 3 | ||
| High Level Output Voltage | VOH | 4.4 | V | VI = VIH or VIL, IOH = -50μA, VCC = 4.5V, -40°C to +125°C | 3 | ||
| High Level Output Voltage | VOH | 2.4 | V | VI = VIH or VIL, IOH = -4mA, VCC = 3V, -40°C to +125°C | 3 | ||
| High Level Output Voltage | VOH | 3.7 | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, -40°C to +125°C | 3 | ||
| Low Level Output Voltage | VOL | 0.1 | V | VI = VIH or VIL, IOL = 50μA, VCC = 2V, -40°C to +125°C | 3 | ||
| Low Level Output Voltage | VOL | 0.55 | V | VI = VIH or VIL, IOL = 4mA, VCC = 3V, -40°C to +125°C | 3 | ||
| Z State Leakage Current | IOZ | 10 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, -40°C to +125°C | 3 | ||
| Input Current | II | -2 | 2 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, -40°C to +125°C | 3 | |
| Supply Current | ICC | 40 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, -40°C to +125°C | 3 | ||
| Input Capacitance | CI | 2 | 10 | pF | VI = VCC or GND, VCC = 5.5V, max at -40°C to +125°C, typ at +25°C | 3 | |
| Propagation Delay A to Y | tPD | 1 | 11.5 | ns | VCC = 3.3V ± 0.3V, CL = 15pF, -40°C to +125°C | 4 | |
| Propagation Delay A to Y | tPD | 1 | 14.5 | ns | VCC = 3.3V ± 0.3V, CL = 50pF, -40°C to +125°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 11.5 | ns | VCC = 3.3V ± 0.3V, CL = 15pF, -40°C to +125°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 14.5 | ns | VCC = 3.3V ± 0.3V, CL = 50pF, -40°C to +125°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 12.5 | ns | VCC = 3.3V ± 0.3V, CL = 15pF, -40°C to +125°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 16.5 | ns | VCC = 3.3V ± 0.3V, CL = 50pF, -40°C to +125°C | 4 | |
| Propagation Delay A to Y | tPD | 1 | 7 | ns | VCC = 5V ± 0.5V, CL = 15pF, -40°C to +125°C | 4 | |
| Propagation Delay A to Y | tPD | 1 | 9.5 | ns | VCC = 5V ± 0.5V, CL = 50pF, -40°C to +125°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 6.5 | ns | VCC = 5V ± 0.5V, CL = 15pF, -40°C to +125°C | 4 | |
| Enable Time OE to Y | tEN | 1 | 9.5 | ns | VCC = 5V ± 0.5V, CL = 50pF, -40°C to +125°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 8.5 | ns | VCC = 5V ± 0.5V, CL = 15pF, -40°C to +125°C | 4 | |
| Disable Time OE to Y | tDIS | 1 | 11 | ns | VCC = 5V ± 0.5V, CL = 50pF, -40°C to +125°C | 4 | |
| Thermal Resistance Junction-to-Ambient | θJA | 184 | °C/W | SOT25, Note 8 | 4 | ||
| Thermal Resistance Junction-to-Case | θJC | 62 | °C/W | SOT25, Note 8 | 4 | ||
| Power Dissipation Capacitance | CPD | 10 | pF | VCC = 5V, f = 1MHz, No Load, TA = +25°C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.0158 grams (Approximate) | 8 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
74AHC1G126QW5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
74ahc1g126qw5-7-etched.step/74ahc1g126qw5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74ahc1g126qw5-7.step/74ahc1g126qw5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (9 pp, sha256
7c5cd3c4252a31bc, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# 74AHC1G126QW5-7
**Diodes Incorporated** · Buffer/Driver/Transceiver · SOT-25
74AHC1G126QW5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output Enable, active-high: the output Y enters high impedance (Z) when OE is LOW, and Y follows A when OE is HIGH. |
| 2 | A | input | Data input with Schmitt trigger action, not limited by VCC (VI 0 to 5.5V recommended), and unused inputs should be held at VCC or ground. |
| 3 | GND | power_in | Ground pin, with a maximum continuous current through GND of -75 mA. |
| 4 | Y | tri_state | 3-state data output that drives ±8mA at VCC = 4.5V and is high impedance when OE is LOW. |
| 5 | VCC | power_in | Supply voltage pin, with a recommended operating range of 2V to 5.5V and an absolute maximum of -0.5 to 6.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Logic ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | -0.5 | | 6.5 | V | | 2 |
| Input Voltage Range | VI | -0.5 | | 6.5 | V | | 2 |
| Voltage Applied to Output in High or Low State | VO | -0.5 | | | V | -0.5 to VCC + 0.5 | 2 |
| Input Clamp Current | IIK | -20 | | | mA | VI < 0 | 2 |
| Output Clamp Current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 2 |
| Continuous Output Current | IO | -25 | | 25 | mA | VO = 0 to VCC | 2 |
| Continuous Current Through VCC | ICC | | | 75 | mA | | 2 |
| Continuous Current Through GND | IGND | -75 | | | mA | | 2 |
| Operating Junction Temperature | TJ | -40 | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 2 |
| Total Power Dissipation | PD | | | 250 | mW | Note 6 | 2 |
| ESD Protection Human Body Model | ESD HBM | | | 2 | kV | | 2 |
| ESD Protection Charged Device Model | ESD CDM | | | 1 | kV | | 2 |
| Operating Voltage | VCC | 2 | | 5.5 | V | | 3 |
| High-Level Input Voltage | VIH | 1.5 | | | V | VCC = 2V | 3 |
| High-Level Input Voltage | VIH | 2.1 | | | V | VCC = 3V | 3 |
| High-Level Input Voltage | VIH | 3.85 | | | V | VCC = 5.5V | 3 |
| Low-Level Input Voltage | VIL | | | 0.5 | V | VCC = 2V | 3 |
| Low-Level Input Voltage | VIL | | | 0.9 | V | VCC = 3V | 3 |
| Low-Level Input Voltage | VIL | | | 1.65 | V | VCC = 5.5V | 3 |
| Input Voltage | VI | 0 | | 5.5 | V | | 3 |
| Output Voltage | VO | 0 | | | V | 0 to VCC | 3 |
| High-Level Output Current | IOH | | | -50 | µA | VCC = 2V | 3 |
| High-Level Output Current | IOH | | | -4 | mA | VCC = 3.3V ± 0.3V | 3 |
| High-Level Output Current | IOH | | | -8 | mA | VCC = 5V ± 0.5V | 3 |
| Low-Level Output Current | IOL | | | 50 | µA | VCC = 2V | 3 |
| Low-Level Output Current | IOL | | | 4 | mA | VCC = 3.3V ± 0.3V | 3 |
| Low-Level Output Current | IOL | | | 8 | mA | VCC = 5V ± 0.5V | 3 |
| Input Transition Rise or Fall Rate | Δt/ΔV | | | 100 | ns/V | VCC = 3.3V ± 0.3V | 3 |
| Input Transition Rise or Fall Rate | Δt/ΔV | | | 20 | ns/V | VCC = 5V ± 0.5V | 3 |
| Operating Free-Air Temperature | TA | -40 | | 125 | °C | | 3 |
| High Level Output Voltage | VOH | 1.9 | | | V | VI = VIH or VIL, IOH = -50μA, VCC = 2V, -40°C to +125°C | 3 |
| High Level Output Voltage | VOH | 2.9 | | | V | VI = VIH or VIL, IOH = -50μA, VCC = 3V, -40°C to +125°C | 3 |
| High Level Output Voltage | VOH | 4.4 | | | V | VI = VIH or VIL, IOH = -50μA, VCC = 4.5V, -40°C to +125°C | 3 |
| High Level Output Voltage | VOH | 2.4 | | | V | VI = VIH or VIL, IOH = -4mA, VCC = 3V, -40°C to +125°C | 3 |
| High Level Output Voltage | VOH | 3.7 | | | V | VI = VIH or VIL, IOH = -8mA, VCC = 4.5V, -40°C to +125°C | 3 |
| Low Level Output Voltage | VOL | | | 0.1 | V | VI = VIH or VIL, IOL = 50μA, VCC = 2V, -40°C to +125°C | 3 |
| Low Level Output Voltage | VOL | | | 0.55 | V | VI = VIH or VIL, IOL = 4mA, VCC = 3V, -40°C to +125°C | 3 |
| Z State Leakage Current | IOZ | | | 10 | μA | VI = 5.5V or GND, VO = 0 to 5.5V, VCC = 5.5V, -40°C to +125°C | 3 |
| Input Current | II | -2 | | 2 | μA | VI = 5.5V or GND, VCC = 0 to 5.5V, -40°C to +125°C | 3 |
| Supply Current | ICC | | | 40 | μA | VI = 5.5V or GND, IO = 0, VCC = 5.5V, -40°C to +125°C | 3 |
| Input Capacitance | CI | | 2 | 10 | pF | VI = VCC or GND, VCC = 5.5V, max at -40°C to +125°C, typ at +25°C | 3 |
| Propagation Delay A to Y | tPD | 1 | | 11.5 | ns | VCC = 3.3V ± 0.3V, CL = 15pF, -40°C to +125°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 14.5 | ns | VCC = 3.3V ± 0.3V, CL = 50pF, -40°C to +125°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 11.5 | ns | VCC = 3.3V ± 0.3V, CL = 15pF, -40°C to +125°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 14.5 | ns | VCC = 3.3V ± 0.3V, CL = 50pF, -40°C to +125°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 12.5 | ns | VCC = 3.3V ± 0.3V, CL = 15pF, -40°C to +125°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 16.5 | ns | VCC = 3.3V ± 0.3V, CL = 50pF, -40°C to +125°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 7 | ns | VCC = 5V ± 0.5V, CL = 15pF, -40°C to +125°C | 4 |
| Propagation Delay A to Y | tPD | 1 | | 9.5 | ns | VCC = 5V ± 0.5V, CL = 50pF, -40°C to +125°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 6.5 | ns | VCC = 5V ± 0.5V, CL = 15pF, -40°C to +125°C | 4 |
| Enable Time OE to Y | tEN | 1 | | 9.5 | ns | VCC = 5V ± 0.5V, CL = 50pF, -40°C to +125°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 8.5 | ns | VCC = 5V ± 0.5V, CL = 15pF, -40°C to +125°C | 4 |
| Disable Time OE to Y | tDIS | 1 | | 11 | ns | VCC = 5V ± 0.5V, CL = 50pF, -40°C to +125°C | 4 |
| Thermal Resistance Junction-to-Ambient | θJA | | 184 | | °C/W | SOT25, Note 8 | 4 |
| Thermal Resistance Junction-to-Case | θJC | | 62 | | °C/W | SOT25, Note 8 | 4 |
| Power Dissipation Capacitance | CPD | | 10 | | pF | VCC = 5V, f = 1MHz, No Load, TA = +25°C | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.0158 grams (Approximate) | 8 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `74AHC1G126QW5-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `74ahc1g126qw5-7-etched.step` / `74ahc1g126qw5-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74ahc1g126qw5-7.step` / `74ahc1g126qw5-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/74AHC1G126QW5-7.pdf) (9 pp, sha256 `7c5cd3c4252a31bc`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/74ahc1g126qw5-7-datasheet.pdf)