component
74AHC164S14-13
Public Made by Adomby adom
Diodes Incorporated Shift Registers, SO-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
74AHC164S14-13
Diodes Incorporated · Shift Registers · SO-14
74AHC164S14-13 from Diodes Incorporated, in a SO-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DSA | input | Serial data input; data on DSA and DSB is logically ANDED and must be stable before and after the CP rising edge to meet set-up and hold timing. |
| 2 | DSB | input | Serial data input; data on DSB is logically ANDED with DSA and must be stable before and after the CP rising edge to meet set-up and hold timing. |
| 3 | Q0 | output | Data output for stage 0; receives the ANDed serial input data on each LOW-to-HIGH transition of CP and is set LOW by MR. |
| 4 | Q1 | output | Data output for stage 1; takes the value of Q0 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 5 | Q2 | output | Data output for stage 2; takes the value of Q1 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 6 | Q3 | output | Data output for stage 3; takes the value of Q2 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 7 | GND | power_in | Ground reference pin. |
| 8 | CP | input | Clock pulse input, positive-edge triggered; shifts data into Q0 and through Qn on each LOW-to-HIGH transition. |
| 9 | MR | input | Asynchronous active-LOW master reset; when LOW sets all Qn LOW regardless of serial or clock inputs, and must return HIGH for a recovery time before the next CP positive edge. |
| 10 | Q4 | output | Data output for stage 4; takes the value of Q3 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 11 | Q5 | output | Data output for stage 5; takes the value of Q4 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 12 | Q6 | output | Data output for stage 6; takes the value of Q5 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 13 | Q7 | output | Data output for stage 7; takes the value of Q6 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 14 | VCC | power_in | Supply voltage; recommended operating range is 2.0 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SO-14 |
| Category | Logic |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2 | 5.5 | V | 4 | ||
| Input Voltage | VI | 0 | 5.5 | V | 4 | ||
| Output Voltage | VO | 0 | V | 4 | |||
| Input Transition Rise or Fall Rate | Δt/ΔV | 100 | ns/V | VCC = 3.0V to 3.6V | 4 | ||
| Input Transition Rise or Fall Rate | Δt/ΔV | 20 | ns/V | VCC = 4.5V to 5.5V | 4 | ||
| Operating Free-Air Temperature | TA | -40 | 125 | °C | 4 | ||
| ESD Human Body Model | ESD HBM | 2 | kV | 4 | |||
| ESD Charged Device Model | ESD CDM | 1 | kV | 4 | |||
| ESD Machine Model | ESD MM | 200 | V | 4 | |||
| Supply Voltage Range | VCC | -0.5 | 7 | V | 4 | ||
| Input Voltage Range | VI | -0.5 | 7 | V | 4 | ||
| Input Clamp Current | IIK | -20 | mA | VI < -0.5V | 4 | ||
| Output Clamp Current | IOK | -20 | 20 | mA | VO < -0.5V or VO > VCC +0.5V | 4 | |
| Continuous Output Current | IO | -25 | 25 | mA | -0.5V < VO VCC +0.5V | 4 | |
| Continuous Current Through Vcc | ICC | 75 | mA | 4 | |||
| Continuous Current Through GND | IGND | -75 | mA | 4 | |||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 4 | ||
| Total Power Dissipation | PTOT | 500 | mW | 4 | |||
| High-Level Input Voltage | VIH | 1.5 | V | VCC = 2.0V; TA = +25°C | 5 | ||
| High-Level Input Voltage | VIH | 2.1 | V | VCC = 3.0V; TA = +25°C | 5 | ||
| High-Level Input Voltage | VIH | 3.85 | V | VCC = 5.5V; TA = +25°C | 5 | ||
| Low-Level Input Voltage | VIL | 0.5 | V | VCC = 2.0V; TA = +25°C | 5 | ||
| Low-Level Input Voltage | VIL | 0.9 | V | VCC = 3.0V; TA = +25°C | 5 | ||
| Low-Level Input Voltage | VIL | 1.65 | V | VCC = 5.5V; TA = +25°C | 5 | ||
| High-Level Output Voltage | VOH | 1.9 | 2 | V | IOH = -50μA; VCC = 2.0V; TA = +25°C | 5 | |
| High-Level Output Voltage | VOH | 1.9 | V | IOH = -50μA; VCC = 2.0V; TA = -40°C to +125°C | 5 | ||
| High-Level Output Voltage | VOH | 2.9 | 3 | V | IOH = -50μA; VCC = 3.0V; TA = +25°C | 5 | |
| High-Level Output Voltage | VOH | 2.9 | V | IOH = -50μA; VCC = 3.0V; TA = -40°C to +125°C | 5 | ||
| High-Level Output Voltage | VOH | 4.4 | 4.5 | V | IOH = -50μA; VCC = 4.5V; TA = +25°C | 5 | |
| High-Level Output Voltage | VOH | 4.4 | V | IOH = -50μA; VCC = 4.5V; TA = -40°C to +125°C | 5 | ||
| High-Level Output Voltage | VOH | 2.58 | V | IOH = -4.0mA; VCC = 3.0V; TA = +25°C | 5 | ||
| High-Level Output Voltage | VOH | 2.4 | V | IOH = -4.0mA; VCC = 3.0V; TA = -40°C to +125°C | 5 | ||
| High-Level Output Voltage | VOH | 3.94 | V | IOH = -8mA; VCC = 4.5; TA = +25°C | 5 | ||
| High-Level Output Voltage | VOH | 3.7 | V | IOH = -8mA; VCC = 4.5; TA = -40°C to +125°C | 5 | ||
| Low-Level Output Voltage | VOL | 0 | 0.1 | V | IOL = 50μA; VCC = 2.0V; TA = +25°C | 5 | |
| Low-Level Output Voltage | VOL | 0.1 | V | IOL = 50μA; VCC = 2.0V; TA = -40°C to +125°C | 5 | ||
| Low-Level Output Voltage | VOL | 0.15 | 0.36 | V | IOL = 4mA; VCC = 3.0V; TA = +25°C | 5 | |
| Low-Level Output Voltage | VOL | 0.55 | V | IOL = 4mA; VCC = 3.0V; TA = -40°C to +125°C | 5 | ||
| Input Current | II | -0.1 | 0.1 | μA | VI = GND or 5.5V; VCC = 5.5V; TA = +25°C | 5 | |
| Input Current | II | -2 | 2 | μA | VI = GND or 5.5V; VCC = 5.5V; TA = -40°C to +125°C | 5 | |
| Supply Current | ICC | 4 | μA | VI = GND or VCC, IO = 0A; VCC = 5.5V; TA = +25°C | 5 | ||
| Supply Current | ICC | 80 | μA | VI = GND or VCC, IO = 0A; VCC = 5.5V; TA = -40°C to +125°C | 5 | ||
| Input Capacitance | CI | 3 | 10 | pF | VI = VCC or GND | 6 |
CAD (KiCad official)
- Symbol:
74AHC164S14-13 - Footprint:
Adom_Gen:Diodes_Incorporated_74 - 3D model: SO-14 (KiCad packages3D, STEP)
- 3D model files:
74ahc164s14-13-etched.step/74ahc164s14-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74ahc164s14-13.step/74ahc164s14-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
1327a73f89c25588, retrieved 2026-10-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74AHC164S14-13
**Diodes Incorporated** · Shift Registers · SO-14
74AHC164S14-13 from Diodes Incorporated, in a SO-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DSA | input | Serial data input; data on DSA and DSB is logically ANDED and must be stable before and after the CP rising edge to meet set-up and hold timing. |
| 2 | DSB | input | Serial data input; data on DSB is logically ANDED with DSA and must be stable before and after the CP rising edge to meet set-up and hold timing. |
| 3 | Q0 | output | Data output for stage 0; receives the ANDed serial input data on each LOW-to-HIGH transition of CP and is set LOW by MR. |
| 4 | Q1 | output | Data output for stage 1; takes the value of Q0 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 5 | Q2 | output | Data output for stage 2; takes the value of Q1 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 6 | Q3 | output | Data output for stage 3; takes the value of Q2 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 7 | GND | power_in | Ground reference pin. |
| 8 | CP | input | Clock pulse input, positive-edge triggered; shifts data into Q0 and through Qn on each LOW-to-HIGH transition. |
| 9 | MR | input | Asynchronous active-LOW master reset; when LOW sets all Qn LOW regardless of serial or clock inputs, and must return HIGH for a recovery time before the next CP positive edge. |
| 10 | Q4 | output | Data output for stage 4; takes the value of Q3 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 11 | Q5 | output | Data output for stage 5; takes the value of Q4 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 12 | Q6 | output | Data output for stage 6; takes the value of Q5 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 13 | Q7 | output | Data output for stage 7; takes the value of Q6 on each LOW-to-HIGH CP transition and is set LOW by MR. |
| 14 | VCC | power_in | Supply voltage; recommended operating range is 2.0 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SO-14 |
| Category | Logic |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2 | | 5.5 | V | | 4 |
| Input Voltage | VI | 0 | | 5.5 | V | | 4 |
| Output Voltage | VO | 0 | | | V | | 4 |
| Input Transition Rise or Fall Rate | Δt/ΔV | | | 100 | ns/V | VCC = 3.0V to 3.6V | 4 |
| Input Transition Rise or Fall Rate | Δt/ΔV | | | 20 | ns/V | VCC = 4.5V to 5.5V | 4 |
| Operating Free-Air Temperature | TA | -40 | | 125 | °C | | 4 |
| ESD Human Body Model | ESD HBM | | | 2 | kV | | 4 |
| ESD Charged Device Model | ESD CDM | | | 1 | kV | | 4 |
| ESD Machine Model | ESD MM | | | 200 | V | | 4 |
| Supply Voltage Range | VCC | -0.5 | | 7 | V | | 4 |
| Input Voltage Range | VI | -0.5 | | 7 | V | | 4 |
| Input Clamp Current | IIK | -20 | | | mA | VI < -0.5V | 4 |
| Output Clamp Current | IOK | -20 | | 20 | mA | VO < -0.5V or VO > VCC +0.5V | 4 |
| Continuous Output Current | IO | -25 | | 25 | mA | -0.5V < VO VCC +0.5V | 4 |
| Continuous Current Through Vcc | ICC | | | 75 | mA | | 4 |
| Continuous Current Through GND | IGND | -75 | | | mA | | 4 |
| Operating Junction Temperature | TJ | -40 | | 150 | °C | | 4 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 4 |
| Total Power Dissipation | PTOT | | | 500 | mW | | 4 |
| High-Level Input Voltage | VIH | 1.5 | | | V | VCC = 2.0V; TA = +25°C | 5 |
| High-Level Input Voltage | VIH | 2.1 | | | V | VCC = 3.0V; TA = +25°C | 5 |
| High-Level Input Voltage | VIH | 3.85 | | | V | VCC = 5.5V; TA = +25°C | 5 |
| Low-Level Input Voltage | VIL | | | 0.5 | V | VCC = 2.0V; TA = +25°C | 5 |
| Low-Level Input Voltage | VIL | | | 0.9 | V | VCC = 3.0V; TA = +25°C | 5 |
| Low-Level Input Voltage | VIL | | | 1.65 | V | VCC = 5.5V; TA = +25°C | 5 |
| High-Level Output Voltage | VOH | 1.9 | 2 | | V | IOH = -50μA; VCC = 2.0V; TA = +25°C | 5 |
| High-Level Output Voltage | VOH | 1.9 | | | V | IOH = -50μA; VCC = 2.0V; TA = -40°C to +125°C | 5 |
| High-Level Output Voltage | VOH | 2.9 | 3 | | V | IOH = -50μA; VCC = 3.0V; TA = +25°C | 5 |
| High-Level Output Voltage | VOH | 2.9 | | | V | IOH = -50μA; VCC = 3.0V; TA = -40°C to +125°C | 5 |
| High-Level Output Voltage | VOH | 4.4 | 4.5 | | V | IOH = -50μA; VCC = 4.5V; TA = +25°C | 5 |
| High-Level Output Voltage | VOH | 4.4 | | | V | IOH = -50μA; VCC = 4.5V; TA = -40°C to +125°C | 5 |
| High-Level Output Voltage | VOH | 2.58 | | | V | IOH = -4.0mA; VCC = 3.0V; TA = +25°C | 5 |
| High-Level Output Voltage | VOH | 2.4 | | | V | IOH = -4.0mA; VCC = 3.0V; TA = -40°C to +125°C | 5 |
| High-Level Output Voltage | VOH | 3.94 | | | V | IOH = -8mA; VCC = 4.5; TA = +25°C | 5 |
| High-Level Output Voltage | VOH | 3.7 | | | V | IOH = -8mA; VCC = 4.5; TA = -40°C to +125°C | 5 |
| Low-Level Output Voltage | VOL | | 0 | 0.1 | V | IOL = 50μA; VCC = 2.0V; TA = +25°C | 5 |
| Low-Level Output Voltage | VOL | | | 0.1 | V | IOL = 50μA; VCC = 2.0V; TA = -40°C to +125°C | 5 |
| Low-Level Output Voltage | VOL | | 0.15 | 0.36 | V | IOL = 4mA; VCC = 3.0V; TA = +25°C | 5 |
| Low-Level Output Voltage | VOL | | | 0.55 | V | IOL = 4mA; VCC = 3.0V; TA = -40°C to +125°C | 5 |
| Input Current | II | -0.1 | | 0.1 | μA | VI = GND or 5.5V; VCC = 5.5V; TA = +25°C | 5 |
| Input Current | II | -2 | | 2 | μA | VI = GND or 5.5V; VCC = 5.5V; TA = -40°C to +125°C | 5 |
| Supply Current | ICC | | | 4 | μA | VI = GND or VCC, IO = 0A; VCC = 5.5V; TA = +25°C | 5 |
| Supply Current | ICC | | | 80 | μA | VI = GND or VCC, IO = 0A; VCC = 5.5V; TA = -40°C to +125°C | 5 |
| Input Capacitance | CI | | 3 | 10 | pF | VI = VCC or GND | 6 |
## CAD (KiCad official)
- Symbol: `74AHC164S14-13`
- Footprint: `Adom_Gen:Diodes_Incorporated_74`
- 3D model: SO-14 (KiCad packages3D, STEP)
- 3D model files: `74ahc164s14-13-etched.step` / `74ahc164s14-13-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74ahc164s14-13.step` / `74ahc164s14-13.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/74AHC164S14-13.pdf) (11 pp, sha256 `1327a73f89c25588`, retrieved 2026-10-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74ahc164s14-13-datasheet.pdf)