component
706JESA
Public Made by Adomby adom
VP Monitors & Reset Circuits, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdown706JESA
VP · Monitors & Reset Circuits · SOP-8
706JESA from VP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input, 4.4V to 5.5V operating range for 706J variant. |
| 2 | GND | power_in | Ground reference. |
| 3 | !MR | input | Manual reset input with pull-up resistor; pulling low forces reset output active with tMD delay of 750 ns max. |
| 4 | PFI | input | 1.25V internal comparator inverting input terminal for monitoring external voltage thresholds. |
| 5 | !PFO | output | 1.25V internal comparator output terminal for low-battery detection logic level output. |
| 6 | WDI | input | Watchdog input; floating this pin disables watchdog function, requires 100 ns minimum pulse width. |
| 7 | !WDO | output | Watchdog output; active-low output driven when watchdog timer expires after 1.6 s with no toggle on WDI. |
| 8 | !RESET | output | Low-level reset signal output active-low when supply falls below 4.00V threshold for 706J, minimum 200 ms reset pulse width. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VP |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
706JESA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
706jesa-etched.step/706jesa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);706jesa.step/706jesa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VP datasheet (19 pp, sha256
7af3fb6c02ceaba8, retrieved 2026-09-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).