component

Wurth 61300411121 (WR-PHD 1x04 2.54 mm pin header)

Public Made by Adom

by adom

Wurth Elektronik WR-PHD 61300411121: 4-pin, 2.54 mm, single-row THT vertical pin header, gold, 3 A. KiCad symbol, footprint at the datasheet's 1.10 mm hole, and KiCad's generic 1x04 header 3D model checked against the drawing.

componentconnectorspin-headerwurth-elektronikwr-phd2-54mmtht61300411121

Verified 61300411121

by Claude, at Noah's request · last 10 Nov 2026 · 1 record · files match
SymbolFootprint3D modelPins1 open item

Verification log 2 records

10 Nov 2026Claude, at Noah's request3D model is KiCad's generic 1x04 header, not Wurth Elektronik's own CADopen
3D modelfor all variants
  • •Wurth's STEP for 61300411121 was not obtained (we-online.com refuses automated downloads). The KiCad model fits every printed dimension; insulator details the drawing does not dimension (chamfers, notches) may differ from the real part. Compare with Wurth's model when someone downloads it through a browser.
Evidenceprovenance
Verified files✓ 61300411121.step
10 Nov 2026Claude, at Noah's requestChecked against Wurth datasheet 61300411121 rev 003.000: hole pattern, pin 1, and every printed dimension of the 3D modelfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet 61300411121 rev 003.000 (2023-01-08), 6 pages, sha256 ce759fb8caee; Article Properties: 4 pins, pl 7.62 mm, L 10.16 mm.
  • ✓Footprint: 4 plated holes 1.10 mm (datasheet 1.10 +-0.15) at 2.54 mm (2.54 +-0.05), pl 7.62 mm (Pattern Properties 7.62 +-0.1), single row, pad 1 square at the origin, pads along +Y (provenance/footprint-vs-datasheet.json, provenance/evidence/footprint-vs-datasheet.png).
  • •Copper pad 1.80 mm: the datasheet prints the hole only; the pad keeps KiCad's 0.35 mm annular ring from its 1.0 mm drill / 1.7 mm pad header.
  • ✓KiCad 10.0 parses the symbol and footprint (kicad-cli 10.0.6 sym/fp export svg; pcbnew FootprintLoad: 4 pads, 1.8 mm, drill 1.1, pad 1 rect).
  • ✓Pins: 4 passive contacts numbered 1 to 4; the datasheet labels the ends 1 and End and prints no signal names; symbol pins equal page.json pins (Pin_1 to Pin_4, KiCad naming).
  • ✓3D model (KiCad 10.0 PinHeader_1x04_P2.54mm_Vertical.step, byte-identical): pins 0.64 square (0.64 +-0.15), pitch 2.54, total 11.54 (11.54 +-0.2), mating 6.0 (6.0 +-0.2), tail 3.0 (3.0 +-0.2), insulator 2.54 high and wide (+-0.15), L 10.16 (10.16 +-0.35): all inside the drawing tolerances (provenance/model-vs-datasheet.json).
  • ✓Pose: Z up, insulator seated on z = 0, tails to z = -3.0, pin 1 contact on pad 1 at the origin, body centred on the pad pattern, footprint binding identity (step2glb features; hero generator align OK, offset 0.0 mm).
  • ✓Pin-1 orientation chain: footprint pad 1 square at the origin with the silkscreen corner mark; model contact 1 at the origin; header symmetric, so contact 1 is the end on pad 1.
  • ✓Etched copy: virtual MPN mark 61300 / 411121 on the pin-1 flat of the -X wall, flat, light, inside the band (adom-aiflow-etch check WARN only on the 320 px widget size).
  • ✓Fusion/EAGLE .lbr: adom-lbr validate OK, lint 0/0; MPN, manufacturer, Mouser, DigiKey, LCSC and Adom Wiki attributes present.
Evidencedatasheetdatasheet p.1footprint vs datasheetmodel viewsprovenance
Verified files✓ 61300411121.kicad_sym✓ 61300411121.kicad_mod✓ 61300411121.step✓ 61300411121-etched.step✓ 61300411121-hero.glb✓ docs/61300411121-datasheet.pdf
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
61300411121 / provenance / model-vs-datasheet.json
HistoryDownload
noah Add datasheet, figures, hero card, provenance, verification log and README a043b0e 7h ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116
{
 "model": "61300411121.glb",
 "units": "mm",
 "source": "Wurth Elektronik 61300411121 datasheet rev 003.000 (2023-01-08), page 1",
 "method": "vertices of the step2glb GLB per material (insulator, contacts); pin section from the shaft vertices between the insulator top (+0.5 mm) and the tip chamfer",
 "measured": {
  "up_axis": "Z",
  "body_len": 10.159,
  "body_wid": 2.54,
  "body_bottom": 0.0,
  "body_top": 2.54,
  "insulator_h": 2.539,
  "pin_bottom": -3.0,
  "pin_top": 8.54,
  "pin_total": 11.54,
  "mating": 6.0,
  "tail": 3.0,
  "pins": [
   {
    "centre": -7.62,
    "w_long": 0.64,
    "w_short": 0.64
   },
   {
    "centre": -5.08,
    "w_long": 0.64,
    "w_short": 0.64
   },
   {
    "centre": -2.54,
    "w_long": 0.64,
    "w_short": 0.64
   },
   {
    "centre": -0.0,
    "w_long": 0.64,
    "w_short": 0.64
   }
  ],
  "pitch": [
   2.54,
   2.54,
   2.54
  ]
 },
 "rows": [
  {
   "dimension": "Pin square",
   "datasheet": "0.64 +-0.15",
   "model": [
    0.64,
    0.64,
    0.64,
    0.64,
    0.64,
    0.64,
    0.64,
    0.64
   ],
   "result": "pass"
  },
  {
   "dimension": "Pitch",
   "datasheet": "2.54 +-0.05",
   "model": [
    2.54,
    2.54,
    2.54
   ],
   "result": "pass"
  },
  {
   "dimension": "Total pin length",
   "datasheet": "11.54 +-0.2",
   "model": 11.54,
   "result": "pass"
  },
  {
   "dimension": "Mating length above insulator",
   "datasheet": "6.0 +-0.2",
   "model": 6.0,
   "result": "pass"
  },
  {
   "dimension": "Tail length below insulator",
   "datasheet": "3.0 +-0.2",
   "model": 3.0,
   "result": "pass"
  },
  {
   "dimension": "Insulator height",
   "datasheet": "2.54 +-0.15",
   "model": 2.539,
   "result": "pass"
  },
  {
   "dimension": "Insulator width",
   "datasheet": "2.54 +-0.15",
   "model": 2.54,
   "result": "pass"
  },
  {
   "dimension": "Insulator length L (4 pins)",
   "datasheet": "10.16 +-0.35",
   "model": 10.159,
   "result": "pass"
  },
  {
   "dimension": "Pin to pin pl (1 to 4)",
   "datasheet": "7.62 +-0.15",
   "model": 7.62,
   "result": "pass"
  }
 ],
 "all_pass": true
}