component

Wurth 61300411121 (WR-PHD 1x04 2.54 mm pin header)

Public Made by Adom

by adom

Wurth Elektronik WR-PHD 61300411121: 4-pin, 2.54 mm, single-row THT vertical pin header, gold, 3 A. KiCad symbol, footprint at the datasheet's 1.10 mm hole, and KiCad's generic 1x04 header 3D model checked against the drawing.

componentconnectorspin-headerwurth-elektronikwr-phd2-54mmtht61300411121

Verified 61300411121

by Claude, at Noah's request · last 10 Nov 2026 · 1 record · files match
SymbolFootprint3D modelPins1 open item

Verification log 2 records

10 Nov 2026Claude, at Noah's request3D model is KiCad's generic 1x04 header, not Wurth Elektronik's own CADopen
3D modelfor all variants
  • •Wurth's STEP for 61300411121 was not obtained (we-online.com refuses automated downloads). The KiCad model fits every printed dimension; insulator details the drawing does not dimension (chamfers, notches) may differ from the real part. Compare with Wurth's model when someone downloads it through a browser.
Evidenceprovenance
Verified files✓ 61300411121.step
10 Nov 2026Claude, at Noah's requestChecked against Wurth datasheet 61300411121 rev 003.000: hole pattern, pin 1, and every printed dimension of the 3D modelfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet 61300411121 rev 003.000 (2023-01-08), 6 pages, sha256 ce759fb8caee; Article Properties: 4 pins, pl 7.62 mm, L 10.16 mm.
  • ✓Footprint: 4 plated holes 1.10 mm (datasheet 1.10 +-0.15) at 2.54 mm (2.54 +-0.05), pl 7.62 mm (Pattern Properties 7.62 +-0.1), single row, pad 1 square at the origin, pads along +Y (provenance/footprint-vs-datasheet.json, provenance/evidence/footprint-vs-datasheet.png).
  • •Copper pad 1.80 mm: the datasheet prints the hole only; the pad keeps KiCad's 0.35 mm annular ring from its 1.0 mm drill / 1.7 mm pad header.
  • ✓KiCad 10.0 parses the symbol and footprint (kicad-cli 10.0.6 sym/fp export svg; pcbnew FootprintLoad: 4 pads, 1.8 mm, drill 1.1, pad 1 rect).
  • ✓Pins: 4 passive contacts numbered 1 to 4; the datasheet labels the ends 1 and End and prints no signal names; symbol pins equal page.json pins (Pin_1 to Pin_4, KiCad naming).
  • ✓3D model (KiCad 10.0 PinHeader_1x04_P2.54mm_Vertical.step, byte-identical): pins 0.64 square (0.64 +-0.15), pitch 2.54, total 11.54 (11.54 +-0.2), mating 6.0 (6.0 +-0.2), tail 3.0 (3.0 +-0.2), insulator 2.54 high and wide (+-0.15), L 10.16 (10.16 +-0.35): all inside the drawing tolerances (provenance/model-vs-datasheet.json).
  • ✓Pose: Z up, insulator seated on z = 0, tails to z = -3.0, pin 1 contact on pad 1 at the origin, body centred on the pad pattern, footprint binding identity (step2glb features; hero generator align OK, offset 0.0 mm).
  • ✓Pin-1 orientation chain: footprint pad 1 square at the origin with the silkscreen corner mark; model contact 1 at the origin; header symmetric, so contact 1 is the end on pad 1.
  • ✓Etched copy: virtual MPN mark 61300 / 411121 on the pin-1 flat of the -X wall, flat, light, inside the band (adom-aiflow-etch check WARN only on the 320 px widget size).
  • ✓Fusion/EAGLE .lbr: adom-lbr validate OK, lint 0/0; MPN, manufacturer, Mouser, DigiKey, LCSC and Adom Wiki attributes present.
Evidencedatasheetdatasheet p.1footprint vs datasheetmodel viewsprovenance
Verified files✓ 61300411121.kicad_sym✓ 61300411121.kicad_mod✓ 61300411121.step✓ 61300411121-etched.step✓ 61300411121-hero.glb✓ docs/61300411121-datasheet.pdf
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
61300411121 / provenance / etch / 61300411121-etched.mark-plan.json
HistoryDownload
noah Add datasheet, figures, hero card, provenance, verification log and README a043b0e 10h ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172
{
 "plan": {
  "schema": "adom/mark-plan@1",
  "mpn": "61300411121",
  "step": "61300411121.step",
  "footprint": "61300411121.kicad_mod",
  "standUp": [],
  "standUpSource": "as-is (Z up)",
  "inputs": {
   "up": "auto",
   "face": "side",
   "along": null,
   "upSupplied": false,
   "faceSupplied": true,
   "faceSource": "--face side"
  },
  "face": "side",
  "pin1": {
   "source": "footprint pad 1",
   "xyMm": [
    0.0,
    -0.0
   ],
   "corner": "left/middle"
  },
  "existingMarks": [],
  "vendorMarking": {
   "present": false,
   "glyphFaces": 0,
   "faces": []
  },
  "faceNormal": [
   -1.0,
   0.0,
   0.0
  ],
  "longAxis": {
   "axis": "y",
   "vector": [
    0.0,
    1.0,
    0.0
   ],
   "why": "long side wall (10.16 mm)",
   "source": "side-wall",
   "override": null,
   "pinRows": null
  },
  "readingDirection": {
   "vector": [
    -0.0,
    -1.0,
    0.0
   ],
   "angleDeg": 270,
   "textUp": [
    1.0,
    -0.0,
    0.0
   ],
   "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
  },
  "band": {
   "regionMm": [
    -0.0,
    -1.016,
    2.54,
    1.016
   ],
   "zMm": 1.27,
   "lengthMm": 2.032,
   "heightMm": 2.54,
   "why": "flat high band of the side wall",
   "terminationsExcludedBy": null,
   "trimmedEnds": [],
   "keepouts": [],
   "sideTurn": {
    "axis": "y",
    "quarterTurns": 1,
    "textUpInTurnedFrame": [
     1,
     0,
     0
    ],
    "baselineInTurnedFrame": [
     0.0,
     -1.0,
     0.0
    ]
   },
   "margins": {
    "lengthEachSide": 0.12,
    "heightEachSide": 0.15
   }
  },
  "text": {
   "lines": [
    "61300",
    "411121"
   ],
   "chars": 11,
   "capHeightMm": 0.3258,
   "smallestLineMm": 0.3258,
   "heightPctOfBand": 29.5,
   "why": "two lines: the smaller line (0.326 mm) beats one line (0.175 mm) by 1.86x",
   "alternative": {
    "lines": [
     "61300411121"
    ],
    "capHeightMm": 0.1747,
    "smallestLineMm": 0.1747
   },
   "font": "service-step2glb /laser-etch (single-stroke outline font)"
  },
  "etch": {
   "poseQuarterTurnsZ": 1,
   "service": "/laser-etch?mode=flat",
   "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
  },
  "outline": {
   "upAxis": "z",
   "poseRotZDeg": 180,
   "rot": 90,
   "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn 61300411121 (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws 61300 / 411121 on the planned band, rot 90)",
   "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
  },
  "widget": {
   "px": 320,
   "pxPerMm": 22.06,
   "capHeightPx": 5.9
  },
  "hints": [
   "LED: the top window stays clear; the mark goes on the front long wall"
  ],
  "warnings": [],
  "summary": "Mark along the 2.03 mm axis (-Y), 0.33 mm text (2 lines), upright with pin 1 left middle, outline rot 90 after a 180 deg pose turn; ~6 px caps at 320 px"
 },
 "etch": {
  "out": "61300411121-etched.step",
  "mpn": "61300411121",
  "lines": [
   "61300",
   "411121"
  ],
  "removedOldMarks": [],
  "turns": [
   {
    "axis": "y",
    "quarterTurns": 1
   },
   {
    "axis": "z",
    "quarterTurns": 1
   }
  ],
  "serviceMarkTurnedQuarter": 3,
  "line2Scaled": true,
  "fit": {
   "scale": 0.5518,
   "capMm": 0.3158,
   "markMm": [
    1.5443,
    0.7326
   ],
   "bandMm": [
    2.032,
    2.54
   ],
   "zMm": 1.275
  }
 }
}