Wurth 61300411121 (WR-PHD 1x04 2.54 mm pin header)

{
 "schema": "adom/mark-check@1",
 "step": "61300411121-etched.step",
 "mpn": "61300411121",
 "status": "WARN",
 "checks": [
  {
   "check": "axis",
   "status": "PASS",
   "detail": "text along the 2.03 mm axis",
   "angleDeg": 0
  },
  {
   "check": "upright",
   "status": "PASS",
   "detail": "upright, left to right, pin 1 left middle"
  },
  {
   "check": "size",
   "status": "PASS",
   "detail": "text height 0.316 mm, 97% of what fits (0.326 mm), block fills 29% of the 2.54 mm band height",
   "capMm": 0.3158,
   "fitMm": 0.3258
  },
  {
   "check": "band",
   "status": "PASS",
   "detail": "inside the usable band"
  },
  {
   "check": "flat",
   "status": "PASS",
   "detail": "flat, coplanar with the face (+5 um)"
  },
  {
   "check": "group",
   "status": "PASS",
   "detail": "Adom.LaserEtch group"
  },
  {
   "check": "colour",
   "status": "PASS",
   "detail": "light mark (sRGB 0.90, 0.90, 0.89)",
   "rgb": [
    0.896243869286,
    0.896243869286,
    0.886003966688
   ]
  },
  {
   "check": "widget",
   "status": "WARN",
   "detail": "5.7 px caps with the outline 320 px wide: too small to read in the widget; use two lines or a shorter mark (the user must agree)",
   "capHeightPx320": 5.7
  }
 ],
 "frame": {
  "reference": "normalized pose: footprint frame, X right, Y up, Z up off the board (after the stand-up turns); the marked side wall turned to face +Z",
  "sourceToNormalized": {
   "turns": [
    {
     "axis": "y",
     "quarterTurns": 1
    }
   ],
   "text": "90 deg about Y",
   "source": "as-is (Z up)"
  },
  "normalizedToOutput": {
   "checkImage": {
    "turns": [
     {
      "axis": "z",
      "quarterTurns": 1
     }
    ],
    "text": "90 deg about Z",
    "pose": "standard reading pose: reading direction to +X, text up +Y, pin 1 lower left"
   },
   "outline": {
    "turns": [
     {
      "axis": "z",
      "quarterTurns": 2
     }
    ],
    "text": "180 deg about Z",
    "pose": "iso outline from +X+Y+Z"
   }
  },
  "modelUp": {
   "supplied": false,
   "source": "as-is (Z up)"
  },
  "packageFront": {
   "supplied": true,
   "face": "side",
   "source": "--face side"
  },
  "textUp": {
   "supplied": false,
   "vector": [
    1.0,
    -0.0,
    0.0
   ],
   "source": "inferred from pin 1: footprint pad 1"
  },
  "mountedPose": false,
  "summary": "frame: normalized pose (source -> normalized: 90 deg about Y, as-is (Z up); normalized -> check image: 90 deg about Z, -> outline: 180 deg about Z); model up inferred, face side supplied, text up inferred from pin 1; not a mounted-pose check"
 },
 "plan": {
  "summary": "Mark along the 2.03 mm axis (-Y), 0.33 mm text (2 lines), upright with pin 1 left middle, outline rot 90 after a 180 deg pose turn; ~6 px caps at 320 px",
  "band": [
   -0.0,
   -1.016,
   2.54,
   1.016
  ],
  "readingDirection": [
   -0.0,
   -1.0,
   0.0
  ],
  "lines": [
   "61300",
   "411121"
  ]
 },
 "thresholds": {
  "sizePass": 0.8,
  "sizeFail": 0.6,
  "widgetPxPass": 6.0,
  "widgetPxFail": 4.0,
  "outlineOffsetMax": 0.15,
  "coplanarMaxMm": 0.02
 },
 "image": "61300411121-etched.check.png",
 "reportPath": "61300411121-etched.check.json"
}