component

Wurth 61300411121 (WR-PHD 1x04 2.54 mm pin header)

Public Made by Adom

by adom

Wurth Elektronik WR-PHD 61300411121: 4-pin, 2.54 mm, single-row THT vertical pin header, gold, 3 A. KiCad symbol, footprint at the datasheet's 1.10 mm hole, and KiCad's generic 1x04 header 3D model checked against the drawing.

componentconnectorspin-headerwurth-elektronikwr-phd2-54mmtht61300411121

Verified 61300411121

by Claude, at Noah's request · last 10 Nov 2026 · 1 record · files match
SymbolFootprint3D modelPins1 open item

Verification log 2 records

10 Nov 2026Claude, at Noah's request3D model is KiCad's generic 1x04 header, not Wurth Elektronik's own CADopen
3D modelfor all variants
  • •Wurth's STEP for 61300411121 was not obtained (we-online.com refuses automated downloads). The KiCad model fits every printed dimension; insulator details the drawing does not dimension (chamfers, notches) may differ from the real part. Compare with Wurth's model when someone downloads it through a browser.
Evidenceprovenance
Verified files✓ 61300411121.step
10 Nov 2026Claude, at Noah's requestChecked against Wurth datasheet 61300411121 rev 003.000: hole pattern, pin 1, and every printed dimension of the 3D modelfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet 61300411121 rev 003.000 (2023-01-08), 6 pages, sha256 ce759fb8caee; Article Properties: 4 pins, pl 7.62 mm, L 10.16 mm.
  • ✓Footprint: 4 plated holes 1.10 mm (datasheet 1.10 +-0.15) at 2.54 mm (2.54 +-0.05), pl 7.62 mm (Pattern Properties 7.62 +-0.1), single row, pad 1 square at the origin, pads along +Y (provenance/footprint-vs-datasheet.json, provenance/evidence/footprint-vs-datasheet.png).
  • •Copper pad 1.80 mm: the datasheet prints the hole only; the pad keeps KiCad's 0.35 mm annular ring from its 1.0 mm drill / 1.7 mm pad header.
  • ✓KiCad 10.0 parses the symbol and footprint (kicad-cli 10.0.6 sym/fp export svg; pcbnew FootprintLoad: 4 pads, 1.8 mm, drill 1.1, pad 1 rect).
  • ✓Pins: 4 passive contacts numbered 1 to 4; the datasheet labels the ends 1 and End and prints no signal names; symbol pins equal page.json pins (Pin_1 to Pin_4, KiCad naming).
  • ✓3D model (KiCad 10.0 PinHeader_1x04_P2.54mm_Vertical.step, byte-identical): pins 0.64 square (0.64 +-0.15), pitch 2.54, total 11.54 (11.54 +-0.2), mating 6.0 (6.0 +-0.2), tail 3.0 (3.0 +-0.2), insulator 2.54 high and wide (+-0.15), L 10.16 (10.16 +-0.35): all inside the drawing tolerances (provenance/model-vs-datasheet.json).
  • ✓Pose: Z up, insulator seated on z = 0, tails to z = -3.0, pin 1 contact on pad 1 at the origin, body centred on the pad pattern, footprint binding identity (step2glb features; hero generator align OK, offset 0.0 mm).
  • ✓Pin-1 orientation chain: footprint pad 1 square at the origin with the silkscreen corner mark; model contact 1 at the origin; header symmetric, so contact 1 is the end on pad 1.
  • ✓Etched copy: virtual MPN mark 61300 / 411121 on the pin-1 flat of the -X wall, flat, light, inside the band (adom-aiflow-etch check WARN only on the 320 px widget size).
  • ✓Fusion/EAGLE .lbr: adom-lbr validate OK, lint 0/0; MPN, manufacturer, Mouser, DigiKey, LCSC and Adom Wiki attributes present.
Evidencedatasheetdatasheet p.1footprint vs datasheetmodel viewsprovenance
Verified files✓ 61300411121.kicad_sym✓ 61300411121.kicad_mod✓ 61300411121.step✓ 61300411121-etched.step✓ 61300411121-hero.glb✓ docs/61300411121-datasheet.pdf
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
61300411121 / 61300411121.kicad_mod
HistoryDownload
noah Add CAD: KiCad symbol, footprint, STEP, GLB, hero GLB, lbr, adom-lbr hub 354941c 5h ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199
(footprint "61300411121"
	(version 20260206)
	(generator "kicad-footprint-generator")
	(layer "F.Cu")
	(descr "Wurth Elektronik WR-PHD 61300411121: 1x04 2.54 mm THT pin header, vertical, gold. Land pattern from KiCad PinHeader_1x04_P2.54mm_Vertical with the drill set to the datasheet recommended hole (1.10 mm) and 1.80 mm pads. Datasheet 61300411121 rev 003.000 (2023-01-08).")
	(tags "Through hole pin header THT 1x04 2.54mm single row")
	(property "Reference" "REF**"
		(at 0 -2.38 0)
		(layer "F.SilkS")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "Value" "61300411121"
		(at 0 10 0)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(property "KiLib_Generator" "connector/pin_header_socket"
		(at 0 0 0)
		(layer "F.SilkS")
		(hide yes)
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(attr through_hole)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start -1.38 -1.38)
		(end 0 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 0)
		(end -1.38 -1.38)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end -1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 1.27)
		(end 1.38 1.27)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start -1.38 9)
		(end 1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_line
		(start 1.38 1.27)
		(end 1.38 9)
		(stroke
			(width 0.12)
			(type solid)
		)
		(layer "F.SilkS")
	)
	(fp_rect
		(start -1.77 -1.77)
		(end 1.77 9.39)
		(stroke
			(width 0.05)
			(type solid)
		)
		(fill no)
		(layer "F.CrtYd")
	)
	(fp_line
		(start -1.27 -0.635)
		(end -0.635 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -1.27 8.89)
		(end -1.27 -0.635)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start -0.635 -1.27)
		(end 1.27 -1.27)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 -1.27)
		(end 1.27 8.89)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_line
		(start 1.27 8.89)
		(end -1.27 8.89)
		(stroke
			(width 0.1)
			(type solid)
		)
		(layer "F.Fab")
	)
	(fp_text user "${REFERENCE}"
		(at 0 3.81 90)
		(layer "F.Fab")
		(effects
			(font
				(size 1 1)
				(thickness 0.15)
			)
		)
	)
	(pad "1" thru_hole rect
		(at 0 0)
		(size 1.8 1.8)
		(drill 1.1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
	)
	(pad "2" thru_hole circle
		(at 0 2.54)
		(size 1.8 1.8)
		(drill 1.1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
	)
	(pad "3" thru_hole circle
		(at 0 5.08)
		(size 1.8 1.8)
		(drill 1.1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
	)
	(pad "4" thru_hole circle
		(at 0 7.62)
		(size 1.8 1.8)
		(drill 1.1)
		(layers "*.Cu" "*.Mask")
		(remove_unused_layers no)
	)
	(embedded_fonts no)
	(model "${KIPRJMOD}/61300411121.step"
		(offset
			(xyz 0 0 0)
		)
		(scale
			(xyz 1 1 1)
		)
		(rotate
			(xyz 0 0 0)
		)
	)
)