main
Ray Publish 0.1.2 419bda1

5P49V5901B000NLGI8

RENESAS · Clock Generators, PLLs, Frequency Synthesizers · QFN-24(4x4)

5P49V5901B000NLGI8 from RENESAS, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLKIN input Differential clock input with a weak 100 kΩ internal pull-down; it is the complement pair with CLKINB.
2 CLKINB input Complementary differential clock input with a weak 100 kΩ internal pull-down.
3 XOUT input Crystal oscillator interface output for the fundamental-mode crystal between XIN and XOUT; it can be left floating when XIN/REF is overdriven.
4 XIN/REF input Crystal oscillator input or single-ended LVCMOS reference clock input; the input voltage must not exceed 1.2 V, and an overdriven input should have an amplitude between 500 mV and 1.2 V with a slew rate of at least 0.2 V/ns.
5 VDDA power_in Analog functions power supply, 1.8 V to 3.3 V; VDDA and VDDD must have the same voltage applied.
6 CLKSEL input Input clock select for manual switchover mode (0 = XIN/REF, XOUT default; 1 = CLKIN, CLKINB), with a weak internal pull-down; its polarity can be changed by I2C.
7 SD/OE input Shutdown or output-enable control with a weak internal pull-down; as SD it shuts the device down with differential outputs driven high/low and LVCMOS outputs low, and as OE it enables or disables the outputs (default active LOW).
8 SEL1/SDA input Configuration select input SEL1 or I2C SDA input, as selected by OUT0_SEL_I2CB at power-up; has a weak internal pull-down.
9 SEL0/SCL input Configuration select input SEL0 or I2C SCL input, as selected by OUT0_SEL_I2CB at power-up; has a weak internal pull-down.
10 VDDO4 power_in Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT4/OUT4B.
11 OUT4 output Output clock 4, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels.
12 OUT4B output Complementary output clock 4, used as the differential complement or the second LVCMOS output.
13 OUT3B output Complementary output clock 3, used as the differential complement or the second LVCMOS output.
14 OUT3 output Output clock 3, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels.
15 VDDO3 power_in Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT3/OUT3B.
16 OUT2B output Complementary output clock 2, used as the differential complement or the second LVCMOS output.
17 OUT2 output Output clock 2, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels.
18 VDDO2 power_in Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT2/OUT2B.
19 OUT1B output Complementary output clock 1, used as the differential complement or the second LVCMOS output.
20 OUT1 output Output clock 1, with register-selectable LVCMOS, LVPECL, HCSL or LVDS logic levels.
21 VDDO1 power_in Output power supply, 1.8 V to 3.3 V, setting the output voltage levels for OUT1/OUT1B.
22 VDDD power_in Digital functions power supply, 1.8 V to 3.3 V; VDDA and VDDD must have the same voltage applied.
23 VDDO0 power_in Power supply for OUT0_SEL_I2CB, 1.8 V to 3.3 V, setting the output voltage level for OUT0.
24 OUT0_SEL_I2CB bidirectional Latched at power-up to select pins 8 and 9 as hardware SEL1/SEL0 (weak 10 kΩ pull-up) or as I2C SDA/SCL (weak 10 kΩ pull-down or floating); after power-up it acts as an LVCMOS reference output, with an internal pull-down.
25 EPAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package QFN-24(4x4)
Category Clock/Timing
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDDA, VDDD, VDDO VDDA, VDDD, VDDO 3.465 V 12
Outputs VDDO (LVCMOS) voltage -0.5 V 12
Outputs IO (SDA) current IO 10 mA 12
Storage temperature TSTG -65 150 °C 12
Junction temperature 125 °C 12
Power supply voltage for supporting 1.8V outputs VDDOX 1.71 1.8 1.89 V 12
Power supply voltage for supporting 2.5V outputs VDDOX 2.375 2.5 2.625 V 12
Power supply voltage for supporting 3.3V outputs VDDOX 3.135 3.3 3.465 V 12
Power supply voltage for core logic functions VDDD 1.71 3.465 V 12
Analog power supply voltage VDDA 1.71 3.465 V 12
Operating temperature, ambient TA -40 85 °C 12
Maximum load capacitance CLOAD_OUT 15 pF 3.3V LVCMOS only 12
External reference crystal frequency FIN 8 40 MHz 12
External reference clock frequency, CLKIN/CLKINB 5 350 MHz 12
Power up time for all VDDs to reach minimum specified voltage tPU 0.05 5 ms power ramps must be monotonic 12
Input capacitance (CLKIN, CLKINB, CLKSEL, SD/OE, SEL1/SDA, SEL0/SCL) CIN 3 7 pF TA = +25 °C 13
Pull-down resistor (CLKSEL, SD/OE, SEL1/SDA, SEL0/SCL, CLKIN, CLKINB, OUT0_SEL_I2CB) 100 300 kΩ TA = +25 °C 13
Programmable capacitance at XIN/REF 9 25 pF TA = +25 °C 13
Programmable capacitance at XOUT 9 25 pF TA = +25 °C 13
Crystal frequency 8 25 40 MHz Fundamental mode 13
Crystal equivalent series resistance (ESR) 10 100 Ω 13
Crystal load capacitance (CL) at <=25 MHz CL 6 8 12 pF 13
Crystal load capacitance (CL) >25 MHz to 40 MHz CL 6 8 pF >25M to 40M 13
Core supply current (Iddcore) Iddcore 30 34 mA 100 MHz on all outputs, 25 MHz REFCLK 13
Power down current Iddpd 10 14 mA SD asserted, I2C programming 13
Output buffer supply current, LVPECL Iddox 42 47 mA LVPECL, 350 MHz, 3.3V VDDOx 13
Output buffer supply current, LVCMOS Iddox 36 42 mA LVCMOS, 200 MHz, 3.3V VDDOx, single CMOS driver active 13
Input HIGH voltage, differential clock input single-ended VIH 0.55 1.7 V Single-ended input, CLKIN/CLKINB 14
Input amplitude, CLKIN/CLKINB VSWING 200 1200 mV Peak to peak value, single-ended 14
Input slew rate, CLKIN/CLKINB dv/dt 0.4 8 V/ns Measured differentially 14
Input duty cycle dTIN 45 55 % Measurement from differential waveform 14
Output HIGH voltage (3.3V LVCMOS) VOH 2.4 V IOH = -15mA 14
Output LOW voltage (3.3V LVCMOS) VOL 0.4 V IOL = 15mA 14
Output leakage current (OUT1~4), 3.3V LVCMOS IOZDD 5 µA Tri-state outputs, VDDO = 3.465V 14
Output leakage current (OUT0), 3.3V LVCMOS IOZDD 30 µA Tri-state outputs, VDDO = 3.465V 14
Output LOW voltage (2.5V LVCMOS) VOL 0.4 V IOL = 12mA 15
Differential output voltage, TRUE binary state (LVDS 3.3V/2.5V) VOT (+) 247 454 mV VDDO = 3.3V+5% or 2.5V+5% 15
Output common mode voltage (LVDS 3.3V/2.5V) VOS 1.125 1.25 1.375 V VDDO = 3.3V+5% or 2.5V+5% 15
Outputs short circuit current (LVDS 3.3V/2.5V) IOS 9 24 mA VOUT+ or VOUT- = 0V or VDDO 15
Differential outputs short circuit current (LVDS 3.3V/2.5V) IOSD 6 12 mA VOUT+ = VOUT- 15
Output common mode voltage (LVDS 1.8V) VOS 0.8 0.875 0.95 V VDDO = 1.8V+5% 15
Peak-to-peak output voltage swing (LVPECL) VSWING 0.55 0.993 V 16
Slew rate (HCSL) dV/dt 1 4 V/ns Scope averaging on 16
Voltage high (HCSL) VHIGH 660 850 mV 16
Voltage low (HCSL) VLOW -150 150 mV 16
Maximum voltage (HCSL) VMAX 1150 mV 16
Minimum voltage (HCSL) VMIN -300 mV 16
Crossing voltage value (HCSL) VCROSS 250 550 mV Scope averaging off 16
Input frequency limit (XIN) 8 40 MHz 17
Input frequency limit (CLKIN) 1 200 MHz 17
VCO frequency fVCO 2500 2900 MHz VCO operating frequency range 17
PFD frequency fPFD 1 150 MHz PFD operating frequency range 17
Input duty cycle (AC timing) t2 45 50 55 % Duty cycle 17
Output duty cycle, all outputs except OUT0 45 50 55 % Measured at VDD/2, VDDOX = 2.5V or 3.3V 17
Jitter Phase Peak-to-Peak (PCIe Gen1) tJ 30 86 ps f = 100MHz, 25MHz crystal input, evaluation band 0Hz to Nyquist 19
Loop bandwidth fBW 0.06 0.9 MHz Input frequency = 25MHz 17
Center spread (spread spectrum) fSPREAD -2.5 2.5 % Programmable, ±0.25% to ±2.5% center spread 20
Down spread (spread spectrum) fSPREAD -5 -0.5 % Programmable, -0.5% to -5% down spread 20
Package thermal impedance, junction to ambient θJA 42 °C/W 0 mps 12
Package thermal impedance, junction to case θJC 41.8 °C/W 0 mps 12

CAD (KiCad official)

  • Symbol: 5P49V5901B000NLGI8
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: 5p49v5901b000nlgi8-etched.step / 5p49v5901b000nlgi8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 5p49v5901b000nlgi8.step / 5p49v5901b000nlgi8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (37 pp, sha256 220fbf224fae5a9c, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF