component

5033981892

Public Made by Adom

by adom

Molex PC Card Sockets, SMD. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectors5033981892board-derived

Verified 5033981892

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Molex sales drawing SD-503398-003 revision J (503398-1892, microSD push/push)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries Molex's current sales drawing SD-503398-003 rev J (dated 2020/01/14, released 2020/04/02); sha256 5eacff35 matches the molex.com salesdrawingpdf fetched 2026-10-27
  • ✓Pins 1-8 match the drawing's contact list (p.1) by number and name: DAT2, CD/DAT3, CMD, VDD, CLK, Vss, DAT0, DAT1. Renamed 2 DAT3/CD -> CD/DAT3 and 6 VSS -> Vss (drawing spelling)
  • ✓Pads 9 and 10 identified from the recommended PCB pattern (p.2): pad 9 (0.90 x 0.93 mm, 2.21 mm from the left edge) is DETECT LEVER MOUNT AREA (Vss: GROUND), pad 10 (1.05 x 0.78 mm, 6.40 mm from the left edge) is DETECT SWITCH MOUNT AREA; renamed 9 DETECT SWITCH -> DETECT LEVER. Note 4: switch closed with a card inserted, open with no card. Pad 11 = the four SHELL MOUNT AREA pads
  • ✓Pin types: all passive (connector contacts); was bidirectional/input/power_in on the card contacts
  • ✓Descriptions rewritten from the drawing only (the old text carried SPI-mode, supply-range and clock-rate claims the Molex drawing does not make); pin 2 described
  • ✓Footprint vs recommended PCB pattern (p.2): 8 terminal pads 0.70 x 1.10 mm at 1.10 mm pitch, 0.35 mm below the pattern's top edge, pin 1 centre 4.45 mm from the left edge, pin 1 to pin 8 = 7.70 mm; shell pads 1.14 x 1.83 (top left), 0.86 x 2.80 (top right), 0.70 x 3.33 (both bottom corners); detect pads 0.90 x 0.93 and 1.05 x 0.78; overall 13.66 x 13.83 mm: every pad matches. Pin 1 at the left of the terminal row as in the drawing
  • ✓3D body: shell 13.50 x 14.34 x 1.28 mm against width 13.1 +0.4/-0.2, length 14.05 +-0.3, height 1.28 +0.12/-0.1 (p.1); the STEP's overall 14.51 mm includes the two detect-contact tails 0.17 mm beyond the shell. Terminal tails sit on pads 1-8 and the detect tails on pads 9 and 10; Z-up, seated on z = 0
  • ✓DigiKey WM11190TR-ND (tape and reel) and Mouser 538-503398-1892 confirmed by part lookup 2026-10-27 (Molex 5033981892 / 503398-1892)
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencesales drawing (Molex)
Verified files✓ 5033981892.kicad_sym✓ 5033981892.kicad_mod✓ 5033981892.step
9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: CD/DAT3, CD_SWsuperseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: CD/DAT3, CD_SW
9 Oct 2026Claude (AI build)Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...superseded
reviewfor all variants
  • •Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 2: symbol "DAT3/CD" vs datasheet "CD/DAT3"; 9: symbol "DETECT SWITCH" vs datasheet "CD_SW"
9 Oct 2026Claude (AI build)1 of 11 pins have no datasheet description yet (pins 2).superseded
reviewfor all variants
  • •1 of 11 pins have no datasheet description yet (pins 2).
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • •10 of 11 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 5033981892.kicad_sym! 5033981892.kicad_mod✓ 5033981892.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
5033981892 / 5033981892.lbr
HistoryDownload
Caleb Publish 0.1.1 e4bc37b 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.6.2">
<drawing>
<settings><setting alwaysvectorfont="no"/></settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
</layers>
<library>
<description>-25℃~+85℃ 1.28mm Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHS</description>
<packages>
<package name="5033981892">
  <description>14 pads, 13.7 x 13.8 mm</description>
  <smd name="1" x="-2.3800" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="2" x="-1.2800" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="3" x="-0.1800" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="4" x="0.9200" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="5" x="2.0200" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="6" x="3.1200" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="7" x="4.2200" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="8" x="5.3200" y="5.6250" dx="0.7000" dy="1.1000" layer="1"/>
  <smd name="9" x="-4.1700" y="-6.8400" dx="0.9000" dy="0.9300" layer="1"/>
  <smd name="10" x="0.0950" y="-6.9150" dx="1.0500" dy="0.7800" layer="1"/>
  <smd name="11" x="-6.4800" y="-5.6400" dx="0.7000" dy="3.3300" layer="1"/>
  <smd name="11@2" x="-6.2600" y="5.6100" dx="1.1400" dy="1.8300" layer="1"/>
  <smd name="11@3" x="6.4000" y="5.1250" dx="0.8600" dy="2.8000" layer="1"/>
  <smd name="11@4" x="6.4800" y="-5.6400" dx="0.7000" dy="3.3300" layer="1"/>
  <wire x1="-7.4000" y1="-8.9700" x2="7.2600" y2="-8.9700" width="0.127" layer="21"/>
  <wire x1="7.2600" y1="-8.9700" x2="7.2600" y2="7.9250" width="0.127" layer="21"/>
  <wire x1="7.2600" y1="7.9250" x2="-7.4000" y2="7.9250" width="0.127" layer="21"/>
  <wire x1="-7.4000" y1="7.9250" x2="-7.4000" y2="-8.9700" width="0.127" layer="21"/>
  <text x="0" y="8.525" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
  <text x="0" y="-9.570" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
</package>
</packages>
<symbols>
<symbol name="5033981892">
  <description>-25℃~+85℃ 1.28mm Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHS</description>
  <wire x1="-7.62" y1="10.795" x2="-5.08" y2="10.795" width="0.254" layer="94"/>
  <wire x1="-5.08" y1="10.795" x2="-5.08" y2="9.525" width="0.254" layer="94"/>
  <wire x1="-5.08" y1="9.525" x2="-7.62" y2="9.525" width="0.254" layer="94"/>
  <wire x1="-7.62" y1="9.525" x2="-7.62" y2="10.795" width="0.254" layer="94"/>
  <rectangle x1="-7.6200" y1="8.2550" x2="-5.0800" y2="6.9850" layer="94"/>
  <rectangle x1="-7.6200" y1="5.7150" x2="-5.0800" y2="4.4450" layer="94"/>
  <rectangle x1="-7.6200" y1="3.1750" x2="-5.0800" y2="1.9050" layer="94"/>
  <rectangle x1="-7.6200" y1="0.6350" x2="-5.0800" y2="-0.6350" layer="94"/>
  <rectangle x1="-7.6200" y1="-1.9050" x2="-5.0800" y2="-3.1750" layer="94"/>
  <rectangle x1="-7.6200" y1="-4.4450" x2="-5.0800" y2="-5.7150" layer="94"/>
  <rectangle x1="-7.6200" y1="-6.9850" x2="-5.0800" y2="-8.2550" layer="94"/>
  <wire x1="-8.8900" y1="-8.8900" x2="-8.8900" y2="11.4300" width="0.2540" layer="94"/>
  <wire x1="-8.8900" y1="11.4300" x2="-1.2700" y2="11.4300" width="0.2540" layer="94"/>
  <wire x1="-1.2700" y1="11.4300" x2="2.5400" y2="15.2400" width="0.2540" layer="94"/>
  <wire x1="2.5400" y1="15.2400" x2="3.8100" y2="15.2400" width="0.2540" layer="94"/>
  <wire x1="3.8100" y1="15.2400" x2="3.8100" y2="13.9700" width="0.2540" layer="94"/>
  <wire x1="3.8100" y1="13.9700" x2="6.3500" y2="13.9700" width="0.2540" layer="94"/>
  <wire x1="6.3500" y1="13.9700" x2="7.6200" y2="15.2400" width="0.2540" layer="94"/>
  <wire x1="7.6200" y1="15.2400" x2="20.3200" y2="15.2400" width="0.2540" layer="94"/>
  <wire x1="20.3200" y1="15.2400" x2="20.3200" y2="-8.8900" width="0.2540" layer="94"/>
  <wire x1="20.3200" y1="-8.8900" x2="-8.8900" y2="-8.8900" width="0.2540" layer="94"/>
  <wire x1="16.5100" y1="15.2400" x2="16.5100" y2="16.5100" width="0.2540" layer="94"/>
  <wire x1="16.5100" y1="16.5100" x2="-19.0500" y2="16.5100" width="0.2540" layer="94"/>
  <wire x1="-19.0500" y1="16.5100" x2="-19.0500" y2="-16.5100" width="0.2540" layer="94"/>
  <wire x1="-19.0500" y1="-16.5100" x2="16.5100" y2="-16.5100" width="0.2540" layer="94"/>
  <wire x1="16.5100" y1="-16.5100" x2="16.5100" y2="-8.8900" width="0.2540" layer="94"/>
  <text x="-16.5100" y="17.7800" size="1.27" layer="95" align="center">&gt;NAME</text>
  <text x="16.5100" y="17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>
  <wire x1="-22.8600" y1="10.1600" x2="-19.0500" y2="10.1600" width="0.254" layer="94"/>
  <pin name="DAT2" x="-22.86" y="10.16" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="7.6200" x2="-19.0500" y2="7.6200" width="0.254" layer="94"/>
  <pin name="CD/DAT3" x="-22.86" y="7.62" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="5.0800" x2="-19.0500" y2="5.0800" width="0.254" layer="94"/>
  <pin name="CMD" x="-22.86" y="5.08" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="2.5400" x2="-19.0500" y2="2.5400" width="0.254" layer="94"/>
  <pin name="VDD" x="-22.86" y="2.54" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="0.0000" x2="-19.0500" y2="0.0000" width="0.254" layer="94"/>
  <pin name="CLK" x="-22.86" y="0" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="-2.5400" x2="-19.0500" y2="-2.5400" width="0.254" layer="94"/>
  <pin name="Vss" x="-22.86" y="-2.54" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="-5.0800" x2="-19.0500" y2="-5.0800" width="0.254" layer="94"/>
  <pin name="DAT0" x="-22.86" y="-5.08" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="-7.6200" x2="-19.0500" y2="-7.6200" width="0.254" layer="94"/>
  <pin name="DAT1" x="-22.86" y="-7.62" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="-12.7000" x2="-19.0500" y2="-12.7000" width="0.254" layer="94"/>
  <pin name="DETECT_LEVER" x="-22.86" y="-12.7" length="point" direction="pas"/>
  <wire x1="-22.8600" y1="-10.1600" x2="-19.0500" y2="-10.1600" width="0.254" layer="94"/>
  <pin name="DETECT_SWITCH" x="-22.86" y="-10.16" length="point" direction="pas"/>
  <wire x1="20.3200" y1="-12.7000" x2="16.5100" y2="-12.7000" width="0.254" layer="94"/>
  <pin name="SHELL" x="20.32" y="-12.7" length="point" direction="pas" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="5033981892" prefix="J">
  <description>-25℃~+85℃ 1.28mm Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHS</description>
  <gates>
    <gate name="G$1" symbol="5033981892" x="0" y="0"/>
  </gates>
  <devices>
    <device name="" package="5033981892">
      <connects>
        <connect gate="G$1" pin="DAT2" pad="1"/>
        <connect gate="G$1" pin="CD/DAT3" pad="2"/>
        <connect gate="G$1" pin="CMD" pad="3"/>
        <connect gate="G$1" pin="VDD" pad="4"/>
        <connect gate="G$1" pin="CLK" pad="5"/>
        <connect gate="G$1" pin="Vss" pad="6"/>
        <connect gate="G$1" pin="DAT0" pad="7"/>
        <connect gate="G$1" pin="DAT1" pad="8"/>
        <connect gate="G$1" pin="DETECT_LEVER" pad="9"/>
        <connect gate="G$1" pin="DETECT_SWITCH" pad="10"/>
        <connect gate="G$1" pin="SHELL" pad="11 11@2 11@3 11@4"/>
      </connects>
      <technologies>
        <technology name="">
          <attribute name="MPN" value="5033981892" constant="no"/>
          <attribute name="MANUFACTURER" value="Molex" constant="no"/>
          <attribute name="DATASHEET" value="https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/503/503398/5033981892_sd.pdf" constant="no"/>
          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/5033981892" constant="no"/>
          <attribute name="MOUSER_PN" value="538-503398-1892" constant="no"/>
          <attribute name="DIGIKEY_PN" value="WM11190TR-ND" constant="no"/>
          <attribute name="LCSC_PN" value="C428492" constant="no"/>
        </technology>
      </technologies>
    </device>
  </devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>