component

501MILFT

Public Made by Adom

by adom

RENESAS Clock Generators, PLLs, Frequency Synthesizers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentclock-timing501milft
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs 501milft: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers 501milft: viewers · Ray 1mo ago
501milft-etched.fit.json 501milft: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
501milft-etched.glb 501milft: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
501milft-etched.step 501milft: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
501milft.glb Publish 0.1.0 · Ray 1mo ago
501milft.kicad_mod Publish 0.1.0 · Ray 1mo ago
501milft.kicad_sym Publish 0.1.0 · Ray 1mo ago
501milft.lbr Publish 0.1.0 · Ray 1mo ago
501milft.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.1.0 · Ray 1mo ago
page.json 501milft: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 26d ago
README.md 501milft: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 1mo ago

501MILFT

RENESAS · Clock Generators, PLLs, Frequency Synthesizers · SOIC-8

501MILFT from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1/ICLK input Crystal connection (X1) or external clock input (ICLK). Accepts a fundamental-mode parallel-resonant crystal (5-27 MHz) or a CMOS/TTL clock input (2-50 MHz). VIH = (VDD/2)+1 V, VIL = (VDD/2)-1 V when driven as ICLK.
2 VDD power_in Positive supply. Connect to +3.3 V or +5 V (operating range +3.0 V to +5.25 V). Requires a 0.01 µF decoupling capacitor to GND placed close to the pin.
3 GND power_in Ground reference. Connect to system ground.
4 S1 input Tri-level select input (bit 1) for the PLL multiplication factor. Connect directly to GND (0), directly to VDD (1), or leave floating (M) to choose one of nine multiplication ratios per the Clock Output Table. VIH = VDD-0.5 V, VIL = 0.5 V.
5 CLK tri_state PLL clock output. Frequency = input × selected multiplier (up to 160 MHz at 5 V, up to 100 MHz at 3.3 V). 25 mA drive at TTL levels (VOH ≥ 2.4 V at -25 mA, VOL ≤ 0.4 V at 25 mA). ~20 Ω nominal output impedance; recommend a 33 Ω series termination for traces > 1 inch. Tri-stated when OE is low.
6 S0 input Tri-level select input (bit 0) for the PLL multiplication factor. Connect directly to GND (0), directly to VDD (1), or leave floating (M). Combined with S1 to select one of nine multiplication ratios. VIH = VDD-0.5 V, VIL = 0.5 V.
7 OE input Output Enable. Active-high: CLK is enabled when OE is high and tri-stated when OE is low. Contains an internal 270 kΩ pull-up to VDD so the pin defaults enabled if left open. VIH = 2.0 V, VIL = 0.8 V; enable/disable time ~50 ns.
8 X2 output Crystal connection (oscillator feedback pin). Connect to the second terminal of the fundamental-mode crystal. Leave unconnected when driving X1/ICLK with an external clock. On-chip capacitance is ~12 pF; add external load caps to X1 and X2 to match crystal CL (each cap = (CL - 12) × 2 pF).

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Clock/Timing
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • 501MLF
  • 501MLFT
  • 501MILFT
  • 501MILFT501GLF
  • 501MILFT501GLFT
  • 501MILFT501GILF
  • 501MILFT501GILFT
  • 501MILFT501-DWF
  • 501MILFT501-DPK
  • 501MILFT501E-DPK

CAD (KiCad official)

  • Symbol: 501MILFT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: 501milft-etched.step / 501milft-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 501milft.step / 501milft.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (10 pp, sha256 a6b6a688d3d2902a, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF