component
4608X-102-330LF
Public Made by Adomby adom
BOURNS Resistor Networks, Arrays, SIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown4608X-102-330LF
BOURNS · Resistor Networks, Arrays · SIP-8
4608X-102-330LF from BOURNS, in a SIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R1_A | passive | Terminal of isolated resistor 1 (102 circuit), connected through the resistor to pin 2; 0.30 W per resistor at 70 °C. |
| 2 | R1_B | passive | Terminal of isolated resistor 1 (102 circuit), connected through the resistor to pin 1. |
| 3 | R2_A | passive | Terminal of isolated resistor 2 (102 circuit), connected through the resistor to pin 4; 0.30 W per resistor at 70 °C. |
| 4 | R2_B | passive | Terminal of isolated resistor 2 (102 circuit), connected through the resistor to pin 3. |
| 5 | R3_A | passive | Terminal of isolated resistor 3 (102 circuit), connected through the resistor to pin 6; 0.30 W per resistor at 70 °C. |
| 6 | R3_B | passive | Terminal of isolated resistor 3 (102 circuit), connected through the resistor to pin 5. |
| 7 | R4_A | passive | Terminal of isolated resistor 4 (102 circuit), connected through the resistor to pin 8; 0.30 W per resistor at 70 °C. |
| 8 | R4_B | passive | Terminal of isolated resistor 4 (102 circuit), connected through the resistor to pin 7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BOURNS |
| Package | SIP-8 |
| Category | Resistors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (10 to 49 ohms range, blank suffix) | -1 | 1 | ohm | 10 ohms to 49 ohms; 102 (isolated) circuit; no F suffix | 2 | ||
| Insulation resistance | 10000 | megohm | 1 | ||||
| Dielectric withstanding voltage | 200 | VRMS | 1 | ||||
| Maximum operating voltage | 100 | V | 1 | ||||
| Power rating per resistor | 0.3 | watt | Per resistor, 102 circuit, at 70 °C | 2 | |||
| Package power rating (4608X) | 1 | watt | Package, ambient temp. 70 °C | 1 | |||
| Operating temperature | -55 | 125 | °C | 1 | |||
| Temperature coefficient of resistance | TCR | -250 | 250 | ppm/°C | Below 50 ohms | 1 | |
| TCR tracking | 50 | ppm/°C | Maximum; equal values | 1 | |||
| ΔR max, short time overload | ΔR | -0.25 | 0.25 | % | TESTS PER MIL-STD-202, short time overload | 1 | |
| ΔR max, load life | ΔR | -1 | 1 | % | TESTS PER MIL-STD-202, load life | 1 | |
| ΔR max, moisture resistance | ΔR | -0.5 | 0.5 | % | TESTS PER MIL-STD-202, moisture resistance | 1 | |
| ΔR max, resistance to soldering heat | ΔR | -0.5 | 0.5 | % | TESTS PER MIL-STD-202, resistance to soldering heat | 1 | |
| ΔR max, terminal strength | ΔR | -0.25 | 0.25 | % | TESTS PER MIL-STD-202, terminal strength | 1 | |
| ΔR max, thermal shock | ΔR | -0.25 | 0.25 | % | TESTS PER MIL-STD-202, thermal shock | 1 | |
| Resistance range (lower bound) | R | 10 | ohm | Resistance range printed as 10 ohms to 10 megohms; upper bound 10 megohms not converted | 1 | ||
| Nominal resistance | R | 33 | ohm | Resistance code 330 (first two digits significant, third digit = zeros) | 1 |
CAD (KiCad official)
- Symbol:
4608X-102-330LF - Footprint:
Package_SIP:SIP-8_19x3mm_P2.54mm - 3D model: SIP-8 (KiCad packages3D, STEP)
- 3D model files:
4608x-102-330lf-etched.step/4608x-102-330lf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);4608x-102-330lf.step/4608x-102-330lf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BOURNS datasheet (3 pp, sha256
5f9c086dfcd3c7d2, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).