main
Ray Publish 0.1.1 e4ef215
{
  "slug": "2edn8533rxtma1",
  "version": "0.1.1",
  "type": "component",
  "description": "Infineon Technologies Gate Drive ICs, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "2edn8533rxtma1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "2edn8533rxtma1.kicad_sym",
    "2edn8533rxtma1.kicad_mod",
    "2edn8533rxtma1.glb",
    "2edn8533rxtma1.step",
    "2edn8533rxtma1.lbr",
    "docs/hero.png",
    "docs/2edn8533rxtma1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "2edn8533rxtma1-hero.glb",
    "2edn8533rxtma1-hero.overlay.json",
    "2edn8533rxtma1-etched.glb",
    "2edn8533rxtma1-etched.step"
  ],
  "component": {
    "mpn": "2EDN8533RXTMA1",
    "manufacturer": "Infineon Technologies",
    "package": "MSOP-8-EP",
    "pin_count": 9,
    "category": "Power Supply Chip",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/05b254aa7868538a522ec8e171199932.pdf",
    "parts": {
      "symbol": "2edn8533rxtma1.kicad_sym",
      "footprint": "2edn8533rxtma1.kicad_mod",
      "model_3d": "2edn8533rxtma1-hero.glb",
      "model_3d_plain": "2edn8533rxtma1-etched.glb",
      "model_3d_step": "2edn8533rxtma1-etched.step",
      "model_3d_step_plain": "2edn8533rxtma1.step",
      "lbr": "2edn8533rxtma1.lbr"
    },
    "distributor_links": {
      "lcsc": "C3655395",
      "digikey": "448-2EDN8533RXTMA1TR-ND",
      "mouser": "726-2EDN8533RXTMA1"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T17:21:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "448-2EDN8533RXTMA1TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "726-2EDN8533RXTMA1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ENA",
        "type": "input",
        "description": "Enable input for channel A: if ENA is high or left open, OUTA follows INA, and a low ENA forces OUTA low."
      },
      {
        "number": "2",
        "name": "INA",
        "type": "input",
        "description": "Logic input for channel A that controls OUTA, stated in the datasheet as non-inverting."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Gate driver reference ground; the exposed pad of the PG-TSSOP-8 must be connected to this GND pin."
      },
      {
        "number": "4",
        "name": "INB",
        "type": "input",
        "description": "Logic input for channel B that controls OUTB, stated in the datasheet as non-inverting."
      },
      {
        "number": "5",
        "name": "OUTB",
        "type": "output",
        "description": "Low-impedance channel B driver output with source and sink capability."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply voltage with an operating range of 4.5 V/8.6 V to 20 V (the 4 V/8 V UVLO option applies)."
      },
      {
        "number": "7",
        "name": "OUTA",
        "type": "output",
        "description": "Low-impedance channel A driver output with source and sink capability."
      },
      {
        "number": "8",
        "name": "ENB",
        "type": "input",
        "description": "Enable input for channel B: if ENB is high or left open, OUTB follows INB, and a low ENB forces OUTB low."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package hint says MSOP-8-EP, but the datasheet lists 2EDN8533RXTMA1 as PG-TSSOP-8 (the R variant; Table 4 describes INA and INB as non-inverting, but 2EDN8533R uses the inverting input configuration"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0195,
        "at": "2026-11-02T17:21:49"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/05b254aa7868538a522ec8e171199932.pdf",
        "pages": 36,
        "sha256": "8f2442538a1422bf",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "2edn8533rxtma1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "2edn8533rxtma1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "761b27c02cc715f93b1452fb3f6688e5deaaffa6a8804ff0bc7d789c96f78559",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}