component

2604-1108

Public Made by Adom

by adom

WAGO PCB terminal block, lever, 8-pole, 5 mm pitch, CONN8_2604-1108_WAG. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectors2604-1108board-derived

Verified 2604-1108

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against WAGO's 2604-1108 data sheet (Version 22.10.2026)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the page's copy (Version 11.09.2026, sha256 c2b5d9a8...; only the marketing text changed between the editions) with WAGO's current data sheet, Version 22.10.2026, 6 pages, fetched 2026-10-27 from wago.priintcloud.com (the datasheet service wago.com links to)
  • ✓Contacts: 8 poles, 2 THT solder pins per potential, in-line (p.3). Footprint pads 2k-1 and 2k (same x, rows 8.2 mm apart) are the two pins of pole k. The old descriptions were wrong: pins 2-8 were described as poles 2-8 and pins 9-16 as separate contacts; all 16 rewritten as pole k, solder pin 1 or 2
  • •Pin names kept as the pad numbers 1-16 (WAGO prints no pole numbering or pin names); types unspecified -> passive (connector contacts)
  • ✓Footprint vs drawing (p.1) and physical data (p.2): pole pitch 5.0 mm (8 columns, x 0..35), solder-pin rows 8.2 mm apart, drill 1.3 mm vs drilled hole 1.3 (+0.1) mm, 2.0 mm pads for 0.8 x 1 mm pins
  • ✓3D body 42.4 x 19.2 x 20.7 mm vs width L = 7 x 5 + 7.4 = 42.4, depth 19.2 (16.3 housing + levers), height 20.7 (16.7 above the board + 4 mm solder pins) (p.1, p.2); pin row 1 is 2.9 mm from the housing back and 8.2 + 5.2 mm from the housing front, the housing ends 3.6 / 3.8 mm beyond the outer poles (L formula), levers on the second-row side as drawn; Z-up, seated on z = 0
  • ✓DigiKey 2946-2604-1108-ND and Mouser 1089-2604-1108 kept (WAGO, this item number)
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedata sheet (WAGO, Version 22.10.2026)product page (WAGO)
Verified files✓ 2604-1108.kicad_sym✓ 2604-1108.kicad_mod✓ 2604-1108.step
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓16 of 16 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2604-1108.kicad_sym! 2604-1108.kicad_mod✓ 2604-1108.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by board-derived · KiCad file format 20241209
Name Last commit message Last updated
docs Publish 0.1.1 · Caleb 1d ago
2604-1108-hero.glb Publish 0.1.2 · Caleb 1d ago
2604-1108-hero.overlay.json Publish 0.1.2 · Caleb 1d ago
2604-1108.glb Licensed 3D model, datasheet text layer and verification log · Caleb 19d ago
2604-1108.kicad_mod Publish 0.1.2 · Caleb 1d ago
2604-1108.kicad_sym Publish 0.1.4 · Caleb 23h ago
2604-1108.lbr Publish 0.1.1 · Caleb 1d ago
2604-1108.step Licensed 3D model, datasheet text layer and verification log · Caleb 19d ago
package.json Publish 0.1.4 · Caleb 23h ago
page.json Set visibility: public · Caleb 23h ago
README.md Publish 0.1.1 · Caleb 1d ago
verification.json Publish 0.1.4 · Caleb 23h ago

2604-1108

WAGO · PCB terminal block, lever, 8-pole, 5 mm pitch · CONN8_2604-1108_WAG

2604-1108 from WAGO, in a CONN8_2604-1108_WAG. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed). Pin functions are extracted from the manufacturer datasheet with page references.

Pinout

Pin Name Type Function
1 1 passive Pole 1, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 1 and 2) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
2 2 passive Pole 1, solder pin 2 of 2: the row 8.2 mm from pin 1, on the lever side [datasheet p.1]. Same potential as pad 1 (2 solder pins per potential). [datasheet p.3]
3 3 passive Pole 2, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 3 and 4) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
4 4 passive Pole 2, solder pin 2 of 2: the row 8.2 mm from pin 3, on the lever side [datasheet p.1]. Same potential as pad 3 (2 solder pins per potential). [datasheet p.3]
5 5 passive Pole 3, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 5 and 6) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
6 6 passive Pole 3, solder pin 2 of 2: the row 8.2 mm from pin 5, on the lever side [datasheet p.1]. Same potential as pad 5 (2 solder pins per potential). [datasheet p.3]
7 7 passive Pole 4, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 7 and 8) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
8 8 passive Pole 4, solder pin 2 of 2: the row 8.2 mm from pin 7, on the lever side [datasheet p.1]. Same potential as pad 7 (2 solder pins per potential). [datasheet p.3]
9 9 passive Pole 5, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 9 and 10) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
10 10 passive Pole 5, solder pin 2 of 2: the row 8.2 mm from pin 9, on the lever side [datasheet p.1]. Same potential as pad 9 (2 solder pins per potential). [datasheet p.3]
11 11 passive Pole 6, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 11 and 12) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
12 12 passive Pole 6, solder pin 2 of 2: the row 8.2 mm from pin 11, on the lever side [datasheet p.1]. Same potential as pad 11 (2 solder pins per potential). [datasheet p.3]
13 13 passive Pole 7, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 13 and 14) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
14 14 passive Pole 7, solder pin 2 of 2: the row 8.2 mm from pin 13, on the lever side [datasheet p.1]. Same potential as pad 13 (2 solder pins per potential). [datasheet p.3]
15 15 passive Pole 8, solder pin 1 of 2: the row 2.9 mm from the housing edge away from the levers, pole pitch 5 mm [datasheet p.1]. The two solder pins of a pole (pads 15 and 16) are one potential; WAGO prints no pole numbers, so poles are numbered along the footprint. [datasheet p.3]
16 16 passive Pole 8, solder pin 2 of 2: the row 8.2 mm from pin 15, on the lever side [datasheet p.1]. Same potential as pad 15 (2 solder pins per potential). [datasheet p.3]

Key specifications

Parameter Value
Manufacturer WAGO
Package CONN8_2604-1108_WAG
Category Connectors
Pins 16
LCSC C3817820
Mouser 1089-2604-1108
DigiKey 2946-2604-1108-ND

CAD

  • Symbol: 2604-1108 (source library Wago_CDT:2604-1108)
  • Footprint: Wago_CDT:CONN8_2604-1108_WAG
  • 3D model path in footprint: ${KIPRJMOD}/2604-1108.step
  • 3D files: 2604-1108.step / 2604-1108.glb.
  • EAGLE/Fusion library: 2604-1108.lbr (adom-lbr)

Provenance

  • Datasheet: WAGO 2604-1108 data sheet (Data Sheet, Version 22.10.2026, sha256 abcab7ea4ae0ea00, retrieved 2026-10-27, tier: mfr)
  • CAD: Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed.
  • Pins: KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7).

Datasheet PDF