component

2604-1108

Public Made by Adom

by adom

WAGO PCB terminal block, lever, 8-pole, 5 mm pitch, CONN8_2604-1108_WAG. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectors2604-1108board-derived

Verified 2604-1108

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against WAGO's 2604-1108 data sheet (Version 22.10.2026)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: replaced the page's copy (Version 11.09.2026, sha256 c2b5d9a8...; only the marketing text changed between the editions) with WAGO's current data sheet, Version 22.10.2026, 6 pages, fetched 2026-10-27 from wago.priintcloud.com (the datasheet service wago.com links to)
  • ✓Contacts: 8 poles, 2 THT solder pins per potential, in-line (p.3). Footprint pads 2k-1 and 2k (same x, rows 8.2 mm apart) are the two pins of pole k. The old descriptions were wrong: pins 2-8 were described as poles 2-8 and pins 9-16 as separate contacts; all 16 rewritten as pole k, solder pin 1 or 2
  • •Pin names kept as the pad numbers 1-16 (WAGO prints no pole numbering or pin names); types unspecified -> passive (connector contacts)
  • ✓Footprint vs drawing (p.1) and physical data (p.2): pole pitch 5.0 mm (8 columns, x 0..35), solder-pin rows 8.2 mm apart, drill 1.3 mm vs drilled hole 1.3 (+0.1) mm, 2.0 mm pads for 0.8 x 1 mm pins
  • ✓3D body 42.4 x 19.2 x 20.7 mm vs width L = 7 x 5 + 7.4 = 42.4, depth 19.2 (16.3 housing + levers), height 20.7 (16.7 above the board + 4 mm solder pins) (p.1, p.2); pin row 1 is 2.9 mm from the housing back and 8.2 + 5.2 mm from the housing front, the housing ends 3.6 / 3.8 mm beyond the outer poles (L formula), levers on the second-row side as drawn; Z-up, seated on z = 0
  • ✓DigiKey 2946-2604-1108-ND and Mouser 1089-2604-1108 kept (WAGO, this item number)
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedata sheet (WAGO, Version 22.10.2026)product page (WAGO)
Verified files✓ 2604-1108.kicad_sym✓ 2604-1108.kicad_mod✓ 2604-1108.step
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓16 of 16 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 2604-1108.kicad_sym! 2604-1108.kicad_mod✓ 2604-1108.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component CAD, datasheet and docs (3)

Caleb ·02af3964a7 ·20d ago ·parent 82ca7db
4 files changed +559
2604-1108.lbr+353docs/2604-1108-datasheet.pdfdocs/hero.pngpackage.json+206
2604-1108.lbradded+353
@@ -0,0 +1,353 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+<layer number="114" name="User4" color="13" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>8 Position Wire to Board Terminal Block Horizontal with Board 0.197\</description>+<packages>+<package name="2604-1108">+  <description>16 pads, 37.0 x 10.2 mm</description>+  <pad name="1" x="0.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="2" x="0.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="3" x="5.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="4" x="5.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="5" x="10.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="6" x="10.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="7" x="15.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="8" x="15.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="9" x="20.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="10" x="20.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="11" x="25.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="12" x="25.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="13" x="30.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="14" x="30.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="15" x="35.0000" y="-0.0000" drill="1.3000" diameter="2.0000" shape="round"/>+  <pad name="16" x="35.0000" y="-8.2000" drill="1.3000" diameter="2.0000" shape="round"/>+  <wire x1="-2.7000" y1="-13.4000" x2="38.8000" y2="-13.4000" width="0.1524" layer="114"/>+  <wire x1="-1.9200" y1="-16.3000" x2="2.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="-1.9200" y1="-13.4000" x2="-1.9200" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="2.4800" y1="-13.4000" x2="2.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="3.0800" y1="-16.3000" x2="7.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="3.0800" y1="-13.4000" x2="3.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="7.4800" y1="-13.4000" x2="7.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="8.0800" y1="-16.3000" x2="12.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="8.0800" y1="-13.4000" x2="8.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="12.4800" y1="-13.4000" x2="12.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="13.0800" y1="-16.3000" x2="17.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="13.0800" y1="-13.4000" x2="13.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="17.4800" y1="-13.4000" x2="17.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="18.0800" y1="-16.3000" x2="22.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="18.0800" y1="-13.4000" x2="18.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="22.4800" y1="-13.4000" x2="22.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="23.0800" y1="-16.3000" x2="27.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="23.0800" y1="-13.4000" x2="23.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="27.4800" y1="-13.4000" x2="27.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="28.0800" y1="-16.3000" x2="32.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="28.0800" y1="-13.4000" x2="28.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="32.4800" y1="-13.4000" x2="32.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="33.0800" y1="-16.3000" x2="37.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="33.0800" y1="-13.4000" x2="33.0800" y2="-16.3000" width="0.1524" layer="114"/>+  <wire x1="37.4800" y1="-13.4000" x2="37.4800" y2="-16.3000" width="0.1524" layer="114"/>+  <text x="0" y="2.600" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-10.800" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="2604-1108">+  <description>8 Position Wire to Board Terminal Block Horizontal with Board 0.197\</description>+  <wire x1="5.08" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-40.64" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-40.64" x2="5.08" y2="-40.64" width="0.254" layer="94"/>+  <wire x1="5.08" y1="-40.64" x2="5.08" y2="2.54" width="0.254" layer="94"/>+  <circle x="7.6200" y="0.0000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-2.5400" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-5.0800" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-7.6200" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-10.1600" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-12.7000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-15.2400" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-17.7800" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-20.3200" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-22.8600" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-25.4000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-27.9400" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-30.4800" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-33.0200" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-35.5600" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-38.1000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="0.0000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-2.5400" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-5.0800" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-7.6200" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-10.1600" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-12.7000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-15.2400" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-17.7800" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-20.3200" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-22.8600" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-25.4000" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-27.9400" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-30.4800" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-33.0200" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-35.5600" radius="0.1270" width="0.1524" layer="94"/>+  <circle x="7.6200" y="-38.1000" radius="0.1270" width="0.1524" layer="94"/>+  <wire x1="7.6200" y1="0.0000" x2="7.6200" y2="-2.5400" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-5.0800" x2="7.6200" y2="-7.6200" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-10.1600" x2="7.6200" y2="-12.7000" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-15.2400" x2="7.6200" y2="-17.7800" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-20.3200" x2="7.6200" y2="-22.8600" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-25.4000" x2="7.6200" y2="-27.9400" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-30.4800" x2="7.6200" y2="-33.0200" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-35.5600" x2="7.6200" y2="-38.1000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="0.0000" x2="5.0800" y2="0.0000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="0.0000" x2="8.8900" y2="0.8467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="0.0000" x2="8.8900" y2="-0.8467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-2.5400" x2="5.0800" y2="-2.5400" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-2.5400" x2="8.8900" y2="-1.6933" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-2.5400" x2="8.8900" y2="-3.3867" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-5.0800" x2="5.0800" y2="-5.0800" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-5.0800" x2="8.8900" y2="-4.2333" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-5.0800" x2="8.8900" y2="-5.9267" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-7.6200" x2="5.0800" y2="-7.6200" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-7.6200" x2="8.8900" y2="-6.7733" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-7.6200" x2="8.8900" y2="-8.4667" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-10.1600" x2="5.0800" y2="-10.1600" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-10.1600" x2="8.8900" y2="-9.3133" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-10.1600" x2="8.8900" y2="-11.0067" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-12.7000" x2="5.0800" y2="-12.7000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-12.7000" x2="8.8900" y2="-11.8533" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-12.7000" x2="8.8900" y2="-13.5467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-15.2400" x2="5.0800" y2="-15.2400" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-15.2400" x2="8.8900" y2="-14.3933" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-15.2400" x2="8.8900" y2="-16.0867" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-17.7800" x2="5.0800" y2="-17.7800" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-17.7800" x2="8.8900" y2="-16.9333" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-17.7800" x2="8.8900" y2="-18.6267" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-20.3200" x2="5.0800" y2="-20.3200" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-20.3200" x2="8.8900" y2="-19.4733" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-20.3200" x2="8.8900" y2="-21.1667" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-22.8600" x2="5.0800" y2="-22.8600" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-22.8600" x2="8.8900" y2="-22.0133" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-22.8600" x2="8.8900" y2="-23.7067" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-25.4000" x2="5.0800" y2="-25.4000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-25.4000" x2="8.8900" y2="-24.5533" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-25.4000" x2="8.8900" y2="-26.2467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-27.9400" x2="5.0800" y2="-27.9400" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-27.9400" x2="8.8900" y2="-27.0933" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-27.9400" x2="8.8900" y2="-28.7867" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-30.4800" x2="5.0800" y2="-30.4800" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-30.4800" x2="8.8900" y2="-29.6333" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-30.4800" x2="8.8900" y2="-31.3267" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-33.0200" x2="5.0800" y2="-33.0200" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-33.0200" x2="8.8900" y2="-32.1733" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-33.0200" x2="8.8900" y2="-33.8667" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-35.5600" x2="5.0800" y2="-35.5600" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-35.5600" x2="8.8900" y2="-34.7133" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-35.5600" x2="8.8900" y2="-36.4067" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-38.1000" x2="5.0800" y2="-38.1000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-38.1000" x2="8.8900" y2="-37.2533" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-38.1000" x2="8.8900" y2="-38.9467" width="0.0254" layer="94"/>+  <wire x1="5.0800" y1="2.5400" x2="5.0800" y2="-40.6400" width="0.0254" layer="94"/>+  <wire x1="5.0800" y1="-40.6400" x2="12.7000" y2="-40.6400" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="0.0000" x2="7.6200" y2="-2.5400" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-5.0800" x2="7.6200" y2="-7.6200" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-10.1600" x2="7.6200" y2="-12.7000" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-15.2400" x2="7.6200" y2="-17.7800" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-20.3200" x2="7.6200" y2="-22.8600" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-25.4000" x2="7.6200" y2="-27.9400" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-30.4800" x2="7.6200" y2="-33.0200" width="0.0254" layer="94"/>+  <wire x1="7.6200" y1="-35.5600" x2="7.6200" y2="-38.1000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="0.0000" x2="5.0800" y2="0.0000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="0.0000" x2="8.8900" y2="0.8467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="0.0000" x2="8.8900" y2="-0.8467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-2.5400" x2="5.0800" y2="-2.5400" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-2.5400" x2="8.8900" y2="-1.6933" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-2.5400" x2="8.8900" y2="-3.3867" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-5.0800" x2="5.0800" y2="-5.0800" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-5.0800" x2="8.8900" y2="-4.2333" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-5.0800" x2="8.8900" y2="-5.9267" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-7.6200" x2="5.0800" y2="-7.6200" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-7.6200" x2="8.8900" y2="-6.7733" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-7.6200" x2="8.8900" y2="-8.4667" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-10.1600" x2="5.0800" y2="-10.1600" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-10.1600" x2="8.8900" y2="-9.3133" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-10.1600" x2="8.8900" y2="-11.0067" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-12.7000" x2="5.0800" y2="-12.7000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-12.7000" x2="8.8900" y2="-11.8533" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-12.7000" x2="8.8900" y2="-13.5467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-15.2400" x2="5.0800" y2="-15.2400" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-15.2400" x2="8.8900" y2="-14.3933" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-15.2400" x2="8.8900" y2="-16.0867" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-17.7800" x2="5.0800" y2="-17.7800" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-17.7800" x2="8.8900" y2="-16.9333" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-17.7800" x2="8.8900" y2="-18.6267" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-20.3200" x2="5.0800" y2="-20.3200" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-20.3200" x2="8.8900" y2="-19.4733" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-20.3200" x2="8.8900" y2="-21.1667" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-22.8600" x2="5.0800" y2="-22.8600" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-22.8600" x2="8.8900" y2="-22.0133" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-22.8600" x2="8.8900" y2="-23.7067" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-25.4000" x2="5.0800" y2="-25.4000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-25.4000" x2="8.8900" y2="-24.5533" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-25.4000" x2="8.8900" y2="-26.2467" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-27.9400" x2="5.0800" y2="-27.9400" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-27.9400" x2="8.8900" y2="-27.0933" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-27.9400" x2="8.8900" y2="-28.7867" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-30.4800" x2="5.0800" y2="-30.4800" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-30.4800" x2="8.8900" y2="-29.6333" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-30.4800" x2="8.8900" y2="-31.3267" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-33.0200" x2="5.0800" y2="-33.0200" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-33.0200" x2="8.8900" y2="-32.1733" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-33.0200" x2="8.8900" y2="-33.8667" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-35.5600" x2="5.0800" y2="-35.5600" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-35.5600" x2="8.8900" y2="-34.7133" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-35.5600" x2="8.8900" y2="-36.4067" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-38.1000" x2="5.0800" y2="-38.1000" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-38.1000" x2="8.8900" y2="-37.2533" width="0.0254" layer="94"/>+  <wire x1="10.1600" y1="-38.1000" x2="8.8900" y2="-38.9467" width="0.0254" layer="94"/>+  <wire x1="12.7000" y1="2.5400" x2="5.0800" y2="2.5400" width="0.0254" layer="94"/>+  <wire x1="12.7000" y1="-40.6400" x2="12.7000" y2="2.5400" width="0.0254" layer="94"/>+  <text x="8.8900" y="6.3500" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="7.6200" y="3.8100" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="1_1" x="0" y="0" length="middle" direction="io"/>+  <pin name="1_2" x="0" y="-2.54" length="middle" direction="io"/>+  <pin name="2_1" x="0" y="-5.08" length="middle" direction="io"/>+  <pin name="2_2" x="0" y="-7.62" length="middle" direction="io"/>+  <pin name="3_1" x="0" y="-10.16" length="middle" direction="io"/>+  <pin name="3_2" x="0" y="-12.7" length="middle" direction="io"/>+  <pin name="4_1" x="0" y="-15.24" length="middle" direction="io"/>+  <pin name="4_2" x="0" y="-17.78" length="middle" direction="io"/>+  <pin name="5_1" x="0" y="-20.32" length="middle" direction="io"/>+  <pin name="5_2" x="0" y="-22.86" length="middle" direction="io"/>+  <pin name="6_1" x="0" y="-25.4" length="middle" direction="io"/>+  <pin name="6_2" x="0" y="-27.94" length="middle" direction="io"/>+  <pin name="7_1" x="0" y="-30.48" length="middle" direction="io"/>+  <pin name="7_2" x="0" y="-33.02" length="middle" direction="io"/>+  <pin name="8_1" x="0" y="-35.56" length="middle" direction="io"/>+  <pin name="8_2" x="0" y="-38.1" length="middle" direction="io"/>+  <pin name="1_1@2" x="0" y="0" length="middle" direction="io"/>+  <pin name="1_2@2" x="0" y="-2.54" length="middle" direction="io"/>+  <pin name="2_1@2" x="0" y="-5.08" length="middle" direction="io"/>+  <pin name="2_2@2" x="0" y="-7.62" length="middle" direction="io"/>+  <pin name="3_1@2" x="0" y="-10.16" length="middle" direction="io"/>+  <pin name="3_2@2" x="0" y="-12.7" length="middle" direction="io"/>+  <pin name="4_1@2" x="0" y="-15.24" length="middle" direction="io"/>+  <pin name="4_2@2" x="0" y="-17.78" length="middle" direction="io"/>+  <pin name="5_1@2" x="0" y="-20.32" length="middle" direction="io"/>+  <pin name="5_2@2" x="0" y="-22.86" length="middle" direction="io"/>+  <pin name="6_1@2" x="0" y="-25.4" length="middle" direction="io"/>+  <pin name="6_2@2" x="0" y="-27.94" length="middle" direction="io"/>+  <pin name="7_1@2" x="0" y="-30.48" length="middle" direction="io"/>+  <pin name="7_2@2" x="0" y="-33.02" length="middle" direction="io"/>+  <pin name="8_1@2" x="0" y="-35.56" length="middle" direction="io"/>+  <pin name="8_2@2" x="0" y="-38.1" length="middle" direction="io"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="2604-1108" prefix="J">+  <description>8 Position Wire to Board Terminal Block Horizontal with Board 0.197\</description>+  <gates>+    <gate name="G$1" symbol="2604-1108" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="2604-1108">+      <connects>+        <connect gate="G$1" pin="1_1" pad="1"/>+        <connect gate="G$1" pin="1_2" pad="2"/>+        <connect gate="G$1" pin="2_1" pad="3"/>+        <connect gate="G$1" pin="2_2" pad="4"/>+        <connect gate="G$1" pin="3_1" pad="5"/>+        <connect gate="G$1" pin="3_2" pad="6"/>+        <connect gate="G$1" pin="4_1" pad="7"/>+        <connect gate="G$1" pin="4_2" pad="8"/>+        <connect gate="G$1" pin="5_1" pad="9"/>+        <connect gate="G$1" pin="5_2" pad="10"/>+        <connect gate="G$1" pin="6_1" pad="11"/>+        <connect gate="G$1" pin="6_2" pad="12"/>+        <connect gate="G$1" pin="7_1" pad="13"/>+        <connect gate="G$1" pin="7_2" pad="14"/>+        <connect gate="G$1" pin="8_1" pad="15"/>+        <connect gate="G$1" pin="8_2" pad="16"/>+        <connect gate="G$1" pin="1_1@2" pad="1"/>+        <connect gate="G$1" pin="1_2@2" pad="2"/>+        <connect gate="G$1" pin="2_1@2" pad="3"/>+        <connect gate="G$1" pin="2_2@2" pad="4"/>+        <connect gate="G$1" pin="3_1@2" pad="5"/>+        <connect gate="G$1" pin="3_2@2" pad="6"/>+        <connect gate="G$1" pin="4_1@2" pad="7"/>+        <connect gate="G$1" pin="4_2@2" pad="8"/>+        <connect gate="G$1" pin="5_1@2" pad="9"/>+        <connect gate="G$1" pin="5_2@2" pad="10"/>+        <connect gate="G$1" pin="6_1@2" pad="11"/>+        <connect gate="G$1" pin="6_2@2" pad="12"/>+        <connect gate="G$1" pin="7_1@2" pad="13"/>+        <connect gate="G$1" pin="7_2@2" pad="14"/>+        <connect gate="G$1" pin="8_1@2" pad="15"/>+        <connect gate="G$1" pin="8_2@2" pad="16"/>+      </connects>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="2604-1108" constant="no"/>+          <attribute name="MANUFACTURER" value="WAGO" constant="no"/>+          <attribute name="DATASHEET" value="https://wago.priintcloud.com/datasheets/2604-1108/en/" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/2604-1108" constant="no"/>+          <attribute name="MOUSER_PN" value="1089-2604-1108" constant="no"/>+          <attribute name="DIGIKEY_PN" value="2946-2604-1108-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C3817820" constant="no"/>+        </technology>+      </technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file
docs/2604-1108-datasheet.pdfadded
⋯ 1 unchanged line ⋯
docs/hero.pngadded
⋯ 1 unchanged line ⋯
package.jsonadded+206
@@ -0,0 +1,206 @@+{+  "slug": "2604-1108",+  "version": "0.1.0",+  "type": "component",+  "tags": [+    "component",+    "connectors",+    "2604-1108",+    "board-derived",+    "staged-for-validation"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "verification.json",+    "2604-1108.kicad_sym",+    "2604-1108.kicad_mod",+    "2604-1108.glb",+    "2604-1108.step",+    "2604-1108.lbr",+    "docs/hero.png",+    "docs/2604-1108-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "2604-1108",+    "manufacturer": "WAGO",+    "package": "CONN8_2604-1108_WAG",+    "pin_count": 16,+    "category": "Connectors",+    "subcategory": "PCB terminal block, lever, 8-pole, 5 mm pitch",+    "datasheet": "https://wago.priintcloud.com/datasheets/2604-1108/en/",+    "parts": {+      "symbol": "2604-1108.kicad_sym",+      "footprint": "2604-1108.kicad_mod",+      "model_3d": "2604-1108.glb",+      "model_3d_plain": "2604-1108.glb",+      "model_3d_step": "2604-1108.step",+      "model_3d_step_plain": "2604-1108.step",+      "lbr": "2604-1108.lbr"+    },+    "distributor_links": {+      "digikey": {+        "part": "2946-2604-1108-ND",+        "url": "https://www.digikey.com/en/products/detail/wago-corporation/2604-1108/15528342"+      },+      "mouser": {+        "part": "1089-2604-1108",+        "url": "https://www.mouser.com/en/ProductDetail/WAGO/2604-1108?qs=dhCoiiGcT1Kxai%2FCrehmzA%3D%3D"+      },+      "lcsc": {+        "part": "C3817820",+        "url": "https://www.lcsc.com/product-detail/C3817820.html"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1_1",+        "type": "unspecified",+        "description": "Pole 1 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "2",+        "name": "1_2",+        "type": "unspecified",+        "description": "Pole 2 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "3",+        "name": "2_1",+        "type": "unspecified",+        "description": "Pole 3 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "4",+        "name": "2_2",+        "type": "unspecified",+        "description": "Pole 4 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "5",+        "name": "3_1",+        "type": "unspecified",+        "description": "Pole 5 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "6",+        "name": "3_2",+        "type": "unspecified",+        "description": "Pole 6 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "7",+        "name": "4_1",+        "type": "unspecified",+        "description": "Pole 7 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "8",+        "name": "4_2",+        "type": "unspecified",+        "description": "Pole 8 clamping unit — Push-in CAGE CLAMP® terminal for one conductor (0.2–4 mm² / 24–12 AWG), rated 32 A. Connects to PCB via 2 THT solder pins per potential (in-line, 5 mm pitch). [datasheet p.2]"+      },+      {+        "number": "9",+        "name": "5_1",+        "type": "unspecified",+        "description": "Contact 5_1; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "10",+        "name": "5_2",+        "type": "unspecified",+        "description": "Contact 5_2; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "11",+        "name": "6_1",+        "type": "unspecified",+        "description": "Contact 6_1; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "12",+        "name": "6_2",+        "type": "unspecified",+        "description": "Contact 6_2; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "13",+        "name": "7_1",+        "type": "unspecified",+        "description": "Contact 7_1; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "14",+        "name": "7_2",+        "type": "unspecified",+        "description": "Contact 7_2; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "15",+        "name": "8_1",+        "type": "unspecified",+        "description": "Contact 8_1; position numbering per the manufacturer drawing. [from symbol]"+      },+      {+        "number": "16",+        "name": "8_2",+        "type": "unspecified",+        "description": "Contact 8_2; position numbering per the manufacturer drawing. [from symbol]"+      }+    ],+    "provenance": {+      "factory_chain": {+        "pipeline": "adom-parts (board-derived) 0.1",+        "pins": "KiCad symbol from the source board + adom-ds2sf datasheet extraction (claude-opus-4-7)",+        "at": "2026-10-08"+      },+      "datasheet": {+        "url": "https://wago.priintcloud.com/datasheets/2604-1108/en/",+        "pages": 6,+        "sha256": "c2b5d9a85aaaaadda3319174738b158c62cd39ff71bfbfc500b7fc52756b81e6",+        "source_tier": "mfr"+      },+      "cad": "Footprint, symbol and 3D model as used on Adom board designs; the 3D model was extracted from the board STEP export",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "2604-1108.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin",+        "seat": "z = 0 (PCB top surface)",+        "extents_mm": [+          42.434,+          19.096,+          20.72+        ],+        "zmin_mm": -4.01,+        "footprint_binding": "identity",+        "sha256": "ac54e768e1f83b68fec9c0c99efcde1f04a2a5f815a315ddd43ccfd2446ebfe5",+        "checked": "2026-10-08",+        "checked_by": "adom-parts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"+      }+    ]+  },+  "description": "WAGO PCB terminal block, lever, 8-pole, 5 mm pitch, CONN8_2604-1108_WAG. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet."+}\ No newline at end of file