component

25LC040

Public Made by Adom

by adom

Microchip Tech Pre-ordered MCUs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentembedded processors & controllers25lc040factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 1d ago
viewers 25lc040: viewers · Ray 1d ago
25lc040-etched.glb Publish 0.1.0 · Ray 1d ago
25lc040-etched.step 25lc040: factory component page (tier=mfr) · Ray 1d ago
25lc040-hero.glb 25lc040: hero GLB from the etched model (keeps the MPN mark) · Ray 1d ago
25lc040-hero.overlay.json Publish 0.1.0 · Ray 1d ago
25lc040.glb Publish 0.1.0 · Ray 1d ago
25lc040.kicad_mod Publish 0.1.0 · Ray 1d ago
25lc040.kicad_sym Publish 0.1.0 · Ray 1d ago
25lc040.lbr Publish 0.1.0 · Ray 1d ago
25lc040.step Publish 0.1.0 · Ray 1d ago
package.json Publish 0.1.0 · Ray 1d ago
page.json Set visibility: public · Ray 1d ago
README.md Publish 0.1.0 · Ray 1d ago

25LC040

Microchip Tech · Pre-ordered MCUs · SOIC-8

25LC040 from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select input: a low level selects the device, a high level deselects it and forces Standby mode, and SO goes high-impedance when deselected.
2 SO tri_state Serial Data Output: data is shifted out after the falling edge of SCK during a read cycle, and the pin is high-impedance when the device is deselected or HOLD is low.
3 WP input Write-Protect input: when low, all writes to the array or STATUS register are disabled; it must be high to allow writing.
4 VSS power_in Ground.
5 SI input Serial Data Input: receives instructions, addresses and data, latched on the rising edge of SCK.
6 SCK input Serial Clock Input: synchronizes communication; SI is latched on the rising edge and SO updates after the falling edge.
7 HOLD input Hold input: pulled low (while SCK is low) to pause serial communication without resetting the sequence, and must be held high when not in use.
8 VCC power_in Supply voltage, 2.5V to 5.5V for the 25LC040 (absolute maximum 7.0V).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN), Narrow, 150 mil (SOIC) Foot Angle φ 048048 14

CAD (KiCad official)

  • Symbol: 25LC040
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: 25lc040-etched.step / 25lc040-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 25lc040.step / 25lc040.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (22 pp, sha256 34959a978a0d599f, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF