component
24LC08B-E
Public Made by Adomby adom
Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 2d ago |
| viewers | 2d ago |
| 24lc08b-e-etched.glb | 2d ago |
| 24lc08b-e-etched.step | 2d ago |
| 24lc08b-e-hero.glb | 2d ago |
| 24lc08b-e-hero.overlay.json | 2d ago |
| 24lc08b-e.glb | 2d ago |
| 24lc08b-e.kicad_mod | 2d ago |
| 24lc08b-e.kicad_sym | 2d ago |
| 24lc08b-e.lbr | 2d ago |
| 24lc08b-e.step | 2d ago |
| package.json | 2d ago |
| page.json | 2d ago |
| README.md | 2d ago |
24LC08B-E
Microchip Tech · EEPROM · SOIC-8
24LC08B-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not used by the 24XX08 (no internal connection); may be left floating or tied to VSS or VCC. |
| 2 | A1 | unconnected | Not used by the 24XX08 (no internal connection); may be left floating or tied to VSS or VCC. |
| 3 | A2 | unconnected | Not used by the 24XX08 (no internal connection); may be left floating or tied to VSS or VCC. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ at 100 kHz, 2 kΩ at 400 kHz and 1 MHz), and changes only while SCL is low except for Start/Stop conditions. |
| 6 | SCL | input | Serial clock input that synchronizes data transfer to and from the device. |
| 7 | WP | input | Write-protect input that must be tied to VSS (normal read/write of the full memory 000-3FF) or to VCC (write operations inhibited, reads unaffected). |
| 8 | VCC | power_in | Power supply; the 24LC08B operates from 2.5V to 5.5V per the device selection table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (24LC08B recommended operating range) | VCC | 2.5 | 5.5 | V | Extended (E) grade, 24LC08B | 3 | |
| Ambient temperature (Extended grade) | TA | -40 | 125 | °C | Extended (E): 24LC08B, VCC = +2.5V to +5.5V | 3 | |
| All inputs and outputs w.r.t. VSS | -0.3 | V | Printed as -0.3V to VCC +1.0V; upper limit is VCC + 1.0V, not a numeric value | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| High-Level Input Voltage | VIH | 0.7 | VCC | 3 | |||
| Low-Level Input Voltage | VIL | 0.3 | VCC | 3 | |||
| Hysteresis of Schmitt Trigger Inputs (SDA, SCL pins) | VHYS | 0.05 | VCC | Note | 3 | ||
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V (Note); TA = +25°C, FCLK = 1 MHz | 3 | ||
| Operating Current (write) | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating Current (read) | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby Current (E-Temp, 24LC08B) | ICCS | 5 | µA | SDA = SCL = VCC, WP = VSS, E-Temp. (24LC08B) | 3 | ||
| Clock Frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock High Time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock Low Time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| SDA and SCL Rise Time | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 4 | ||
| SDA and SCL Fall Time | TF | 300 | ns | Note 1 | 4 | ||
| Start Condition Hold Time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Start Condition Setup Time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Stop Condition Setup Time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Output Valid from Clock | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 2) | 4 | ||
| Bus Free Time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Output Fall Time from VIH Minimum to VIL Maximum | TOF | 250 | ns | 2.5V ≤ VCC ≤ 5.5V (Notes 1, 3 and 4) | 5 | ||
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | 50 | ns | Note 1 | 5 | ||
| Write Cycle Time | TWC | 5 | ms | byte or page | 5 | ||
| Endurance | 1e+06 | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 26 |
CAD (KiCad official)
- Symbol:
24LC08B-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
24lc08b-e-etched.step/24lc08b-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc08b-e.step/24lc08b-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (49 pp, sha256
ed776d9b62c286ce, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).