component
24LC04BT-E
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
24LC04BT-E
Microchip Tech · EEPROM · SOT-23-5
24LC04BT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz and 1 MHz). |
| 4 | VCC | power_in | Power supply input, 2.5V to 5.5V for the 24LC04B. |
| 5 | WP | input | Write-protect input: tied to VSS enables normal read/write of the full memory, while tied to VCC inhibits all write operations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz | 3 | ||
| Operating Current (write) | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating Current (read) | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby Current (E-Temp, 24LC04B) | ICCS | 5 | µA | SDA = SCL = VCC, WP = VSS, E-Temp. (24LC04B) | 3 | ||
| Clock Frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock High Time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock Low Time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| SDA and SCL Rise Time | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 4 | ||
| SDA and SCL Fall Time | TF | 300 | ns | Note 1 | 4 | ||
| Start Condition Hold Time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Start Condition Setup Time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Stop Condition Setup Time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Output Valid from Clock | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 2) | 4 | ||
| Bus Free Time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Output Fall Time from VIH Minimum to VIL Maximum | TOF | 250 | ns | 2.5V ≤ VCC ≤ 5.5V (24LC04B) (Notes 1, 2 and 3) | 5 | ||
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | 50 | ns | Note 1 | 5 | ||
| Write Cycle Time (byte or page) | TWC | 5 | ms | 5 | |||
| Endurance | 1e+06 | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 | |||
| All inputs and outputs w.r.t. VSS | -0.3 | V | w.r.t. VSS; upper limit printed as VCC +1.0V | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | 3 | ||||
| Supply voltage VCC (24LC04B) | VCC | 2.5 | 5.5 | V | 24LC04B, Extended (E) and Industrial (I) ranges | 3 | |
| Ambient temperature, Extended (E) | TA | -40 | 125 | °C | Extended (E), VCC = +2.5V to +5.5V (24LC04B) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 25 |
CAD (KiCad official)
- Symbol:
24LC04BT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
24lc04bt-e-etched.step/24lc04bt-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc04bt-e.step/24lc04bt-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
f5139a05ac922d5f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 24LC04BT-E
**Microchip Tech** · EEPROM · SOT-23-5
24LC04BT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz and 1 MHz). |
| 4 | VCC | power_in | Power supply input, 2.5V to 5.5V for the 24LC04B. |
| 5 | WP | input | Write-protect input: tied to VSS enables normal read/write of the full memory, while tied to VCC inhibits all write operations. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Level Output Voltage | VOL | | | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 |
| Input Leakage Current | ILI | -1 | | 1 | µA | VIN = VSS or VCC | 3 |
| Output Leakage Current | ILO | -1 | | 1 | µA | VOUT = VSS or VCC | 3 |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | | | 10 | pF | VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz | 3 |
| Operating Current (write) | ICCWRITE | | | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 |
| Operating Current (read) | ICCREAD | | | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 |
| Standby Current (E-Temp, 24LC04B) | ICCS | | | 5 | µA | SDA = SCL = VCC, WP = VSS, E-Temp. (24LC04B) | 3 |
| Clock Frequency | FCLK | | | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 4 |
| Clock High Time | THIGH | 600 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 4 |
| Clock Low Time | TLOW | 1300 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 4 |
| SDA and SCL Rise Time | TR | | | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 4 |
| SDA and SCL Fall Time | TF | | | 300 | ns | Note 1 | 4 |
| Start Condition Hold Time | THD:STA | 600 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 4 |
| Start Condition Setup Time | TSU:STA | 600 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 4 |
| Data Input Hold Time | THD:DAT | 0 | | | ns | Note 2 | 4 |
| Data Input Setup Time | TSU:DAT | 100 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 4 |
| Stop Condition Setup Time | TSU:STO | 600 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 4 |
| Output Valid from Clock | TAA | | | 900 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 2) | 4 |
| Bus Free Time | TBUF | 1300 | | | ns | 2.5V ≤ VCC ≤ 5.5V | 5 |
| Output Fall Time from VIH Minimum to VIL Maximum | TOF | | | 250 | ns | 2.5V ≤ VCC ≤ 5.5V (24LC04B) (Notes 1, 2 and 3) | 5 |
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | | | 50 | ns | Note 1 | 5 |
| Write Cycle Time (byte or page) | TWC | | | 5 | ms | | 5 |
| Endurance | | 1e+06 | | | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 |
| All inputs and outputs w.r.t. VSS | | -0.3 | | | V | w.r.t. VSS; upper limit printed as VCC +1.0V | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Ambient temperature with power applied | | -40 | | 125 | °C | | 3 |
| ESD protection on all pins | | | | 4 | kV | | 3 |
| Supply voltage VCC (24LC04B) | VCC | 2.5 | | 5.5 | V | 24LC04B, Extended (E) and Industrial (I) ranges | 3 |
| Ambient temperature, Extended (E) | TA | -40 | | 125 | °C | Extended (E), VCC = +2.5V to +5.5V (24LC04B) | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 25 |
## CAD (KiCad official)
- Symbol: `24LC04BT-E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `24lc04bt-e-etched.step` / `24lc04bt-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `24lc04bt-e.step` / `24lc04bt-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/24lc04bt-e-datasheet.pdf) (48 pp, sha256 `f5139a05ac922d5f`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/24lc04bt-e-datasheet.pdf)