component
24LC04B
Public Made by Adomby adom
Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 15h ago |
| viewers | 15h ago |
| 24lc04b-etched.glb | 15h ago |
| 24lc04b-etched.step | 15h ago |
| 24lc04b-hero.glb | 15h ago |
| 24lc04b-hero.overlay.json | 15h ago |
| 24lc04b.glb | 15h ago |
| 24lc04b.kicad_mod | 15h ago |
| 24lc04b.kicad_sym | 15h ago |
| 24lc04b.lbr | 15h ago |
| 24lc04b.step | 15h ago |
| package.json | 15h ago |
| page.json | 15h ago |
| README.md | 15h ago |
24LC04B
Microchip Tech · EEPROM · SOIC-8
24LC04B from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not used by the 24XX04 (no internal connection); may be left floating or tied to VSS or VCC. |
| 2 | A1 | unconnected | Not used by the 24XX04 (no internal connection); may be left floating or tied to VSS or VCC. |
| 3 | A2 | unconnected | Not used by the 24XX04 (no internal connection); may be left floating or tied to VSS or VCC. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial address/data I/O, open-drain, requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz). |
| 6 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 7 | WP | input | Write-protect input that must be tied to VSS (normal read/write of memory 000-1FF) or VCC (write operations inhibited, reads unaffected). |
| 8 | VCC | power_in | Power supply; 2.5V to 5.5V for the 24LC04B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 2.5 | 5.5 | V | 24LC04B | 1 | |
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | 3 | ||||
| High-Level Input Voltage | VIH | 0.7 | V | 0.7 VCC | 3 | ||
| Low-Level Input Voltage | VIL | 0.3 | V | 0.3 VCC | 3 | ||
| Hysteresis of Schmitt Trigger Inputs | VHYS | 0.05 | V | 0.05 VCC; Note: periodically sampled | 3 | ||
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V, TA = 25°C, FCLK = 1 MHz | 3 | ||
| Operating Current (write) | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating Current (read) | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby Current, I-Temp | ICCS | 1 | µA | SDA = SCL = VCC, WP = VSS, I-Temp. | 3 | ||
| Standby Current, E-Temp | ICCS | 5 | µA | SDA = SCL = VCC, WP = VSS, E-Temp. (24LC04B) | 3 | ||
| Clock Frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock High Time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock Low Time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| SDA and SCL Rise Time | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 4 | ||
| SDA and SCL Fall Time | TF | 300 | ns | Note 1 | 4 | ||
| Start Condition Hold Time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Start Condition Setup Time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Stop Condition Setup Time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Output Valid from Clock | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 2) | 4 | ||
| Bus Free Time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Output Fall Time from VIH Minimum to VIL Maximum | TOF | 250 | ns | 2.5V ≤ VCC ≤ 5.5V (24LC04B) (Notes 1, 2 and 3); min 20+0.1CB | 5 | ||
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | 50 | ns | Note 1 | 5 | ||
| Write Cycle Time (byte or page) | TWC | 5 | ms | 5 | |||
| Endurance | 1e+06 | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 | |||
| Operating temperature, Industrial | TA | -40 | 85 | °C | Industrial (I) | 3 | |
| Operating temperature, Extended | TA | -40 | 125 | °C | Extended (E), VCC = 2.5V to 5.5V (24LC04B) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 25 |
CAD (KiCad official)
- Symbol:
24LC04B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
24lc04b-etched.step/24lc04b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc04b.step/24lc04b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
f5139a05ac922d5f, retrieved 2026-10-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).