component
24LC04B-E
Public Made by Adomby adom
Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown24LC04B-E
Microchip Tech · EEPROM · SOIC-8
24LC04B-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not used by the 24XX04 (no internal connection); may be left floating or tied to VSS or VCC. |
| 2 | A1 | unconnected | Not used by the 24XX04 (no internal connection); may be left floating or tied to VSS or VCC. |
| 3 | A2 | unconnected | Not used by the 24XX04 (no internal connection); may be left floating or tied to VSS or VCC. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial address/data I/O, open-drain, requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz). |
| 6 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 7 | WP | input | Write-protect input that must be tied to VSS (normal read/write of memory 000-1FF) or VCC (write operations inhibited, reads unaffected). |
| 8 | VCC | power_in | Power supply; 2.5V to 5.5V for the 24LC04B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC (24LC04B) | VCC | 2.5 | 5.5 | V | Extended (E): TA = -40°C to +125°C | 3 | |
| Operating temperature (Extended) | TA | -40 | 125 | °C | Extended (E) | 3 | |
| Input/output voltage w.r.t. VSS | -0.3 | V | Upper limit VCC + 1.0V; all inputs and outputs w.r.t. VSS | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| High-level input voltage | VIH | 0.7 | xVCC | 3 | |||
| Low-level input voltage | VIL | 0.3 | xVCC | 3 | |||
| Hysteresis of Schmitt trigger inputs | VHYS | 0.05 | xVCC | Note: periodically sampled, not 100% tested | 3 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input leakage current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output leakage current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V, TA = 25°C, FCLK = 1 MHz | 3 | ||
| Operating current, write | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating current, read | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby current, I-Temp. | ICCS | 1 | µA | SDA = SCL = VCC, WP = VSS, I-Temp. | 3 | ||
| Standby current, E-Temp. | ICCS | 5 | µA | SDA = SCL = VCC, WP = VSS, E-Temp. (24LC04B) | 3 | ||
| Clock frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock high time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Clock low time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| SDA and SCL rise time | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 4 | ||
| SDA and SCL fall time | TF | 300 | ns | Note 1 | 4 | ||
| Start condition hold time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Start condition setup time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Data input hold time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data input setup time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Stop condition setup time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 4 | ||
| Output valid from clock | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 2) | 4 | ||
| Bus free time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Output fall time from VIH min to VIL max | TOF | 250 | ns | 2.5V ≤ VCC ≤ 5.5V (24LC04B) (Notes 1, 2 and 3); min printed as 20+0.1CB | 5 | ||
| Input filter spike suppression (SDA and SCL) | TSP | 50 | ns | Note 1 | 5 | ||
| Write cycle time (byte or page) | TWC | 5 | ms | 5 | |||
| Endurance | 1e+06 | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 25 |
CAD (KiCad official)
- Symbol:
24LC04B-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
24lc04b-e-etched.step/24lc04b-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc04b-e.step/24lc04b-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
f5139a05ac922d5f, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).