component
24LC025T-E
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown24LC025T-E
Microchip Tech · EEPROM · SOT-23-6
24LC025T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial Clock input used to synchronize data transfer to and from the device, with Schmitt trigger input. |
| 2 | VSS | power_in | Ground. |
| 3 | SDA | bidirectional | Serial data I/O, open-drain, used to transfer addresses and data into and out of the device; requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
| 4 | A1 | input | Address input compared with the corresponding slave address bit; must be connected to either VCC or VSS. |
| 5 | A0 | input | Address input compared with the corresponding slave address bit; must be connected to either VCC or VSS. |
| 6 | VCC | power_in | Power supply, +1.7 to 5.5V (2.5V to 5.5V for 24LC025). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Memory |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level input voltage | VIH | 0.7 | V | x VCC (0.7 VCC) | 2 | ||
| Low-level input voltage | VIL | 0.3 | V | x VCC (0.3 VCC); 0.2 VCC for VCC < 2.5V | 2 | ||
| Hysteresis of Schmitt Trigger inputs | VHYS | 0.05 | V | x VCC (0.05 VCC) (Note) | 2 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 2 | ||
| Input leakage current | ILI | -1 | 1 | μA | VIN = VSS or VCC | 2 | |
| Output leakage current | ILO | -1 | 1 | μA | VOUT = VSS or VCC | 2 | |
| Pin capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.5V (Note), TA = 25°C, FCLK = 1 MHz | 2 | ||
| Operating current (write) | ICC write | 0.1 | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 2 | |
| Operating current (read) | ICC read | 0.05 | 1 | mA | 2 | ||
| Standby current (Automotive) | ICCS | 5 | μA | Automotive; SDA = SCL = VCC; A0, A1, A2, WP = VSS | 2 | ||
| Clock frequency | FCLK | 400 | kHz | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Clock high time | THIGH | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Clock low time | TLOW | 1300 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| SDA and SCL rise time | TR | 300 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 1) | 3 | ||
| SDA and SCL fall time | TF | 300 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 1) | 3 | ||
| Start condition hold time | THD:STA | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Start condition setup time | TSU:STA | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Data input hold time | THD:DAT | 0 | ns | (Note 2) | 3 | ||
| Data input setup time | TSU:DAT | 100 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Stop condition setup time | TSU:STO | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| WP setup time | TSU:WP | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| WP hold time | THD:WP | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Output valid from clock | TAA | 900 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 2) | 3 | ||
| Bus free time | TBUF | 4700 | ns | 1.8V ≤ VCC ≤ 5.5V | 3 | ||
| Input filter spike suppression (SDA and SCL pins) | TSP | 50 | ns | (Note 1 and Note 3) | 3 | ||
| Write cycle time (byte or page) | TWC | 5 | ms | 3 | |||
| Supply voltage (Automotive) | VCC | 2.5 | 5.5 | V | Automotive (E) | 2 | |
| Operating temperature (Automotive) | TA | -40 | 125 | °C | Automotive (E) | 2 | |
| All inputs and outputs w.r.t. VSS | -0.3 | 1 | V | -0.3V to VCC +1.0V | 2 | ||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 2 | |||
| ESD protection on all pins | 4 | kV | ≥ 4 kV | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | P = Plastic DIP, (300 mil Body), 8-lead SN = Plastic SOIC, (3.90 mm Body) | 27 |
CAD (KiCad official)
- Symbol:
24LC025T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
24lc025t-e-etched.step/24lc025t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc025t-e.step/24lc025t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (30 pp, sha256
47e8b47b497bf42a, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).