component
24LC024T-I
Public Made by Adomby adom
Microchip Tech EEPROM, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
24LC024T-I
Microchip Tech · EEPROM · MSOP-8
24LC024T-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Chip address input that must be hard-wired to VCC or VSS, or driven to a logic level before normal operation, and is compared with the client address bits. |
| 2 | A1 | input | Chip address input that must be hard-wired to VCC or VSS, or driven to a logic level before normal operation, and is compared with the client address bits. |
| 3 | A2 | input | Chip address input that must be hard-wired to VCC or VSS, or driven to a logic level before normal operation, and is compared with the client address bits. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ at 100 kHz and 2 kΩ at 400 kHz) and may change only while SCL is low except for Start and Stop conditions. |
| 6 | SCL | input | Serial clock input that synchronizes data transfer to and from the device, with Schmitt trigger input for noise suppression. |
| 7 | WP | input | Hardware write-protect input that must be tied to VCC to enable write protection or to VSS to disable it; this pin is available only on the 24XX024. |
| 8 | VCC | power_in | Power supply, specified at 2.5V to 5.5V for the 24LC024. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 19 |
CAD (KiCad official)
- Symbol:
24LC024T-I - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
24lc024t-i-etched.step/24lc024t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc024t-i.step/24lc024t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (41 pp, sha256
28c12b77c2e7b4a0, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 24LC024T-I
**Microchip Tech** · EEPROM · MSOP-8
24LC024T-I from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Chip address input that must be hard-wired to VCC or VSS, or driven to a logic level before normal operation, and is compared with the client address bits. |
| 2 | A1 | input | Chip address input that must be hard-wired to VCC or VSS, or driven to a logic level before normal operation, and is compared with the client address bits. |
| 3 | A2 | input | Chip address input that must be hard-wired to VCC or VSS, or driven to a logic level before normal operation, and is compared with the client address bits. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ at 100 kHz and 2 kΩ at 400 kHz) and may change only while SCL is low except for Start and Stop conditions. |
| 6 | SCL | input | Serial clock input that synchronizes data transfer to and from the device, with Schmitt trigger input for noise suppression. |
| 7 | WP | input | Hardware write-protect input that must be tied to VCC to enable write protection or to VSS to disable it; this pin is available only on the 24XX024. |
| 8 | VCC | power_in | Power supply, specified at 2.5V to 5.5V for the 24LC024. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Memory |
| Pins | 8 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 19 |
## CAD (KiCad official)
- Symbol: `24LC024T-I`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `24lc024t-i-etched.step` / `24lc024t-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `24lc024t-i.step` / `24lc024t-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/24lc024t-i-datasheet.pdf) (41 pp, sha256 `28c12b77c2e7b4a0`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/24lc024t-i-datasheet.pdf)