24LC024T-E

{
  "slug": "24lc024t-e",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "24lc024t-e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "24lc024t-e.kicad_sym",
    "24lc024t-e.kicad_mod",
    "24lc024t-e.glb",
    "24lc024t-e.step",
    "24lc024t-e.lbr",
    "docs/hero.png",
    "docs/24lc024t-e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "24lc024t-e-hero.glb",
    "24lc024t-e-hero.overlay.json",
    "24lc024t-e-etched.glb"
  ],
  "component": {
    "mpn": "24LC024T-E",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9dcdd8f8875ce2a40b3d87ac2d202207.pdf",
    "parts": {
      "symbol": "24lc024t-e.kicad_sym",
      "footprint": "24lc024t-e.kicad_mod",
      "model_3d": "24lc024t-e-hero.glb",
      "model_3d_plain": "24lc024t-e-etched.glb",
      "model_3d_step": "24lc024t-e-etched.step",
      "model_3d_step_plain": "24lc024t-e.step",
      "lbr": "24lc024t-e.lbr"
    },
    "distributor_links": {
      "lcsc": "C2061224"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T02:11:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Chip-select address input whose level is compared with the slave address bit; it must be tied to VCC or VSS, and up to eight devices can share the bus using different combinations."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Chip-select address input whose level is compared with the slave address bit; it must be tied to VCC or VSS, and up to eight devices can share the bus using different combinations."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Chip-select address input whose level is compared with the slave address bit; it must be tied to VCC or VSS, and up to eight devices can share the bus using different combinations."
      },
      {
        "number": "4",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz or 2 kΩ for 400 kHz), and may change only while SCL is low except for Start and Stop conditions."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that synchronizes all data transfer to and from the device."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Hardware write-protect input that must be tied to VCC (write protection enabled) or VSS (write protection disabled); available only on the 24XX024."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply; the device selection table specifies 2.5V to 5.5V for the 24LC024, while the pin table lists +1.7 to 5.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Supply range conflict within the datasheet: the pin table gives +1.7 to 5.5V (a range that applies t; The MPN 24LC024T-E includes a 'T' that may denote tape-and-reel packaging rather than temperature gr"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0464,
        "at": "2026-10-29T02:11:27"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/9dcdd8f8875ce2a40b3d87ac2d202207.pdf",
        "pages": 30,
        "sha256": "11fe37a6615872bd",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "24lc024t-e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "24lc024t-e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fbc367e180e3fd50e268538818b3e7a04bdd2a32cdda283cf59ade21c74a6c15",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}