component
24LC024-I
Public Made by Adomby adom
Microchip Tech EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
24LC024-I
Microchip Tech · EEPROM · TSSOP-8
24LC024-I from Microchip Tech, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input A0 used for multi-device operation, must be connected to VCC or VSS. |
| 2 | A1 | input | Address input A1 used for multi-device operation, must be connected to VCC or VSS. |
| 3 | A2 | input | Address input A2 used for multi-device operation, must be connected to VCC or VSS. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial address/data I/O; open-drain, needs a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
| 6 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 7 | WP | input | Hardware write-protect input on 24XX024; must be tied to VCC (protection enabled) or VSS (protection disabled). |
| 8 | VCC | power_in | Power supply, 2.5V to 5.5V for 24LC024. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 2.5 | 5.5 | V | 24LC024 | 1 | |
| Operating temperature, Industrial | TA | -40 | 85 | °C | Industrial (I) | 3 | |
| Input/output voltage w.r.t. VSS (lower limit) | -0.3 | V | All inputs and outputs w.r.t. VSS; upper limit VCC +1.0V | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | 3 | ||||
| Low-level output voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input leakage current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output leakage current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.5V, TA = 25°C, FCLK = 1 MHz | 3 | ||
| Operating current, write | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating current, read | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby current, I-temp | ICCS | 1 | µA | SDA = SCL = VCC, A0, A1, A2, WP = VSS, I-Temp | 3 | ||
| Clock frequency | FCLK | 400 | kHz | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Clock high time | THIGH | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Clock low time | TLOW | 1300 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| SDA and SCL rise time | TR | 300 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 1) | 4 | ||
| SDA and SCL fall time | TF | 300 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 1) | 4 | ||
| Start condition hold time | THD:STA | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Start condition setup time | TSU:STA | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Data input hold time | THD:DAT | 0 | ns | (Note 2) | 4 | ||
| Data input setup time | TSU:DAT | 100 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Stop condition setup time | TSU:STO | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| WP setup time | TSU:WP | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| WP hold time | THD:WP | 600 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Output valid from clock | TAA | 900 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 2) | 4 | ||
| Bus free time | TBUF | 1300 | ns | 1.8V ≤ VCC ≤ 5.5V | 4 | ||
| Input filter spike suppression (SDA and SCL pins) | TSP | 50 | ns | (Note 1 and Note 3) | 4 | ||
| Write cycle time (byte or page) | TWC | 5 | ms | 4 | |||
| Endurance | 1e+06 | cycles | 25°C, VCC = 5.5V, Page mode (Note 4) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 19 |
CAD (KiCad official)
- Symbol:
24LC024-I - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
24lc024-i-etched.step/24lc024-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24lc024-i.step/24lc024-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (41 pp, sha256
28c12b77c2e7b4a0, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 24LC024-I
**Microchip Tech** · EEPROM · TSSOP-8
24LC024-I from Microchip Tech, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input A0 used for multi-device operation, must be connected to VCC or VSS. |
| 2 | A1 | input | Address input A1 used for multi-device operation, must be connected to VCC or VSS. |
| 3 | A2 | input | Address input A2 used for multi-device operation, must be connected to VCC or VSS. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Serial address/data I/O; open-drain, needs a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
| 6 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 7 | WP | input | Hardware write-protect input on 24XX024; must be tied to VCC (protection enabled) or VSS (protection disabled). |
| 8 | VCC | power_in | Power supply, 2.5V to 5.5V for 24LC024. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 2.5 | | 5.5 | V | 24LC024 | 1 |
| Operating temperature, Industrial | TA | -40 | | 85 | °C | Industrial (I) | 3 |
| Input/output voltage w.r.t. VSS (lower limit) | | -0.3 | | | V | All inputs and outputs w.r.t. VSS; upper limit VCC +1.0V | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Ambient temperature with power applied | | -40 | | 125 | °C | | 3 |
| ESD protection on all pins | | 4 | | | kV | | 3 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 |
| Input leakage current | ILI | -1 | | 1 | µA | VIN = VSS or VCC | 3 |
| Output leakage current | ILO | -1 | | 1 | µA | VOUT = VSS or VCC | 3 |
| Pin capacitance (all inputs/outputs) | CIN, COUT | | | 10 | pF | VCC = 5.5V, TA = 25°C, FCLK = 1 MHz | 3 |
| Operating current, write | ICCWRITE | | | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 |
| Operating current, read | ICCREAD | | | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 |
| Standby current, I-temp | ICCS | | | 1 | µA | SDA = SCL = VCC, A0, A1, A2, WP = VSS, I-Temp | 3 |
| Clock frequency | FCLK | | | 400 | kHz | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Clock high time | THIGH | 600 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Clock low time | TLOW | 1300 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| SDA and SCL rise time | TR | | | 300 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 1) | 4 |
| SDA and SCL fall time | TF | | | 300 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 1) | 4 |
| Start condition hold time | THD:STA | 600 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Start condition setup time | TSU:STA | 600 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Data input hold time | THD:DAT | 0 | | | ns | (Note 2) | 4 |
| Data input setup time | TSU:DAT | 100 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Stop condition setup time | TSU:STO | 600 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| WP setup time | TSU:WP | 600 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| WP hold time | THD:WP | 600 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Output valid from clock | TAA | | | 900 | ns | 1.8V ≤ VCC ≤ 5.5V (Note 2) | 4 |
| Bus free time | TBUF | 1300 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 4 |
| Input filter spike suppression (SDA and SCL pins) | TSP | | | 50 | ns | (Note 1 and Note 3) | 4 |
| Write cycle time (byte or page) | TWC | | | 5 | ms | | 4 |
| Endurance | | 1e+06 | | | cycles | 25°C, VCC = 5.5V, Page mode (Note 4) | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 19 |
## CAD (KiCad official)
- Symbol: `24LC024-I`
- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`
- 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `24lc024-i-etched.step` / `24lc024-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `24lc024-i.step` / `24lc024-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/24lc024-i-datasheet.pdf) (41 pp, sha256 `28c12b77c2e7b4a0`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/24lc024-i-datasheet.pdf)