# 24FC16-I

**Microchip Tech** · EEPROM · SOIC-8

24FC16-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | unconnected | Not used by the 24XX16 (no internal connection), so it may be left floating or tied to VSS or VCC. |
| 2 | A1 | unconnected | Not used by the 24XX16 (no internal connection), so it may be left floating or tied to VSS or VCC. |
| 3 | A2 | unconnected | Not used by the 24XX16 (no internal connection), so it may be left floating or tied to VSS or VCC. |
| 4 | VSS | power_in | Ground reference for the device; WP tied to VSS enables normal read/write of the full memory. |
| 5 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ at 100 kHz, 2 kΩ at 400 kHz and 1 MHz), and SDA may change only while SCL is low except for Start/Stop conditions. |
| 6 | SCL | input | Serial clock input that synchronizes data transfer to and from the device. |
| 7 | WP | input | Write-protect input that must be tied to VSS (writes enabled, memory 000-7FF) or VCC (write operations inhibited, reads unaffected). |
| 8 | VCC | power_in | Power supply; the 24FC16 operates from 1.7V to 5.5V (1 MHz maximum clock frequency). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-Level Input Voltage | VIH | 0.7 |  |  | VCC |  | 3 |
| Low-Level Input Voltage | VIL |  |  | 0.3 | VCC |  | 3 |
| Hysteresis of Schmitt Trigger Inputs | VHYS | 0.05 |  |  | VCC | Note 1 | 3 |
| Low-Level Output Voltage | VOL |  |  | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 |
| Input Leakage Current | ILI | -1 |  | 1 | µA | VIN = VSS or VCC | 3 |
| Output Leakage Current | ILO | -1 |  | 1 | µA | VOUT = VSS or VCC | 3 |
| Pin Capacitance (all inputs/outputs) | CIN, COUT |  |  | 10 | pF | VCC = 5.0V (Note 1), TA = 25°C, FCLK = 1 MHz | 3 |
| Operating Current (write) | ICCWRITE |  |  | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 |
| Operating Current (read) | ICCREAD |  |  | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 |
| Standby Current | ICCS |  |  | 1 | µA | SDA = SCL = VCC, WP = VSS, I-Temp. | 3 |
| Clock Frequency (24FC16) | FCLK |  |  | 1000 | kHz | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Clock High Time (24FC16) | THIGH | 260 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Clock Low Time (24FC16) | TLOW | 500 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| SDA and SCL Rise Time (24FC16) | TR |  |  | 1000 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) (Note 1) | 4 |
| SDA and SCL Fall Time | TF |  |  | 300 | ns | Note 1 | 4 |
| Start Condition Hold Time (24FC16) | THD:STA | 250 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Start Condition Setup Time (24FC16) | TSU:STA | 250 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Data Input Hold Time | THD:DAT | 0 |  |  | ns | Note 2 | 4 |
| Data Input Setup Time (24FC16) | TSU:DAT | 50 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Stop Condition Setup Time (24FC16) | TSU:STO | 250 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| WP Setup Time (24FC16) | TSU:WP | 600 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| WP Hold Time (24FC16) | THD:WP | 600 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Output Valid from Clock (24FC16) | TAA |  |  | 450 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) (Note 2) | 4 |
| Bus Free Time (24FC16) | TBUF | 500 |  |  | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) | 4 |
| Input Filter Spike Suppression (SDA and SCL pins, 24FC16) | TSP |  |  | 100 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC16) (Note 1) | 5 |
| Write Cycle Time (byte or page) | TWC |  |  | 5 | ms | byte or page | 5 |
| Endurance |  | 1e+06 |  |  | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 |
| All inputs and outputs w.r.t. VSS |  | -0.3 |  |  | V | Upper limit printed as VCC +1.0V | 3 |
| Storage temperature | TSTG | -65 |  | 150 | °C |  | 3 |
| Ambient temperature with power applied | TA | -40 |  | 125 | °C |  | 3 |
| Supply voltage VCC (24FC16) | VCC | 1.7 |  | 5.5 | V | Industrial (I) and Extended (E) operating range for 24FC16 | 3 |
| Ambient temperature, Industrial (I) | TA | -40 |  | 85 | °C | Industrial (I) grade, VCC = 1.7V to 5.5V | 3 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 26 |

## CAD (KiCad official)

- Symbol: `24FC16-I`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `24fc16-i-etched.step` / `24fc16-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `24fc16-i.step` / `24fc16-i.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589016107449520128) (49 pp, sha256 `00300b5fbb858585`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/24fc16-i-datasheet.pdf)