main
History Download
Ray Publish 0.1.0 5339114

24FC02T-I

Microchip Tech · EEPROM · SOT-23-5

24FC02T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input Serial Clock input used to synchronize data transfer to and from the device; the 24FC02 supports clock frequencies up to 1 MHz at 1.7V ≤ VCC ≤ 5.5V.
2 VSS power_in Ground reference for the device; all inputs and outputs are referenced to VSS.
3 SDA bidirectional Serial Address/Data input/output, open-drain, requiring a pull-up resistor to VCC (typically 2 kΩ for 400 kHz and 1 MHz).
4 VCC power_in Power supply; the 24FC02 operates from 1.7V to 5.5V, with absolute maximum VCC of 6.5V.
5 WP input Write-Protect: tie to VSS to enable normal read/write of the full memory (00-FF), or tie to VCC to inhibit all write operations while reads are unaffected.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Memory
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-Level Input Voltage VIH 0.7 VCC 3
Low-Level Input Voltage VIL 0.3 VCC 3
Hysteresis of Schmitt Trigger Inputs VHYS 0.05 VCC Note 3
Low-Level Output Voltage VOL 0.4 V IOL = 3.0 mA, VCC = 2.5V 3
Input Leakage Current ILI -1 1 μA VIN = VSS or VCC 3
Output Leakage Current ILO -1 1 μA VOUT = VSS or VCC 3
Pin Capacitance (all inputs/outputs) CIN, COUT 10 pF VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz 3
Operating Current (write) ICCWRITE 3 mA VCC = 5.5V, SCL = 400 kHz 3
Operating Current (read) ICCREAD 1 mA VCC = 5.5V, SCL = 400 kHz 3
Standby Current (I-Temp.) ICCS 1 μA SDA = SCL = VCC; WP = VSS, I-Temp. 3
Clock Frequency FCLK 1000 kHz 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
Clock High Time THIGH 260 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
Clock Low Time TLOW 500 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
SDA and SCL Rise Time TR 1000 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) (Note 1) 4
SDA and SCL Fall Time TF 300 ns Note 1 4
Start Condition Hold Time THD:STA 250 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
Start Condition Setup Time TSU:STA 250 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
Data Input Hold Time THD:DAT 0 ns Note 2 4
Data Input Setup Time TSU:DAT 50 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
Stop Condition Setup Time TSU:STO 250 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
WP Setup Time TSU:WP 0 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
WP Hold Time THD:WP 1000 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 4
Output Valid from Clock TAA 450 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) (Note 2) 4
Bus Free Time TBUF 500 ns 1.7V ≤ VCC ≤ 5.5V (24FC02) 5
Input Filter Spike Suppression (SDA and SCL pins) TSP 50 ns Note 1 5
Write Cycle Time (byte or page) TWC 5 ms 5
Endurance 1e+06 cycles 25°C, 5.5V, Page Mode (Note 4) 5
All inputs and outputs w.r.t. VSS (lower limit) -0.3 V Upper limit printed as VCC +1.0V 3
Storage Temperature -65 150 °C 3
Ambient Temperature with Power Applied -40 125 °C With power applied 3
Supply Voltage (operating range) VCC 1.7 5.5 V Industrial (I), 24FC02 3
Ambient Temperature (operating range) TA -40 85 °C Industrial (I) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 27

CAD (KiCad official)

  • Symbol: 24FC02T-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: 24fc02t-i-ot-etched.step / 24fc02t-i-ot-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24fc02t-i-ot.step / 24fc02t-i-ot.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (46 pp, sha256 bc81f3bdfb1fdf3a, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF