component
24FC01T-I
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown24FC01T-I
Microchip Tech · EEPROM · SOT-23-5
24FC01T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | The SCL input is used to synchronize the data transfer to and from the device (I2C serial clock, 1 MHz compatible for the 24FC01). |
| 2 | VSS | power_in | Ground reference for the device; the WP pin must be tied to either VSS or VCC. |
| 3 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz), and may change only while SCL is low except for Start/Stop conditions. |
| 4 | VCC | power_in | Power supply; the 24FC01 operates from 1.7V to 5.5V over the Industrial (-40°C to +85°C) and Extended (-40°C to +125°C) temperature ranges. |
| 5 | WP | input | Write-protect input: tied to VSS enables normal read/write of the entire memory (00-7F), while tied to VCC inhibits all write operations without affecting reads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-Level Input Voltage | VIH | 0.7 | x VCC | 3 | |||
| Low-Level Input Voltage | VIL | 0.3 | x VCC | 3 | |||
| Hysteresis of Schmitt Trigger Inputs | VHYS | 0.05 | x VCC | Note 1 | 3 | ||
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V (Note 1); TA = +25°C, FCLK = 1 MHz | 3 | ||
| Operating Current (write) | ICCWRITE | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Operating Current (read) | ICCREAD | 1 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| Standby Current (I-Temp) | ICCS | 1 | µA | SDA = SCL = VCC, WP = VSS, I-Temp. | 3 | ||
| Clock Frequency (24FC01) | FCLK | 1000 | kHz | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| Clock High Time (24FC01) | THIGH | 260 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| Clock Low Time (24FC01) | TLOW | 500 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| SDA and SCL Rise Time (24FC01) | TR | 1000 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) (Note 1) | 4 | ||
| SDA and SCL Fall Time | TF | 300 | ns | Note 1 | 4 | ||
| Start Condition Hold Time (24FC01) | THD:STA | 250 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| Start Condition Setup Time (24FC01) | TSU:STA | 250 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data Input Setup Time (24FC01) | TSU:DAT | 50 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| Stop Condition Setup Time (24FC01) | TSU:STO | 250 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| WP Setup Time (24FC01) | TSU:WP | 0 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| WP Hold Time (24FC01) | THD:WP | 1000 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 4 | ||
| Output Valid from Clock (24FC01) | TAA | 450 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) (Note 2) | 4 | ||
| Bus Free Time (24FC01) | TBUF | 500 | ns | 1.7V ≤ VCC ≤ 5.5V (24FC01) | 5 | ||
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | 50 | ns | Note 1 | 5 | ||
| Write Cycle Time (byte or page) | TWC | 5 | ms | byte or page | 5 | ||
| Endurance | 1e+06 | cycles | +25°C, 5.5V, Page Mode (Note 4) | 5 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | with power applied | 3 | ||
| Supply voltage (recommended, 24FC01, Industrial) | VCC | 1.7 | 5.5 | V | Industrial (I) range, 24FC01 | 3 | |
| Ambient temperature (Industrial) | TA | -40 | 85 | °C | Industrial (I) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 28 |
CAD (KiCad official)
- Symbol:
24FC01T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
24fc01t-i-etched.step/24fc01t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24fc01t-i.step/24fc01t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (51 pp, sha256
bd99e09bfa3a6a47, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).