component

24C16

Public Made by Adom

by adom

lingxingic EEPROM, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentmemory24c16
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

24C16

lingxingic · EEPROM · SOP-8

24C16 from lingxingic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input A0. On the 24C16 (16 Kbit) the A0/A1/A2 pins are not used for hardware addressing (the three address bits come from the memory word address); this pin is listed as 'Not connected' in the pin table and is internally pulled down to GND if left floating.
2 A1 input Device address input A1. Not used for hardware addressing on the 24C16 variant; internally pulled down to GND if left floating.
3 A2 input Device address input A2. Not used for hardware addressing on the 24C16 variant; internally pulled down to GND if left floating.
4 GND power_in Ground reference for the device.
5 SDA bidirectional Serial Data Input/Output. Open-drain bidirectional data line for the I2C bus; requires an external pull-up resistor. Wire-OR compatible with other open-drain devices. Input capacitance 8 pF (typ).
6 SCL input Serial Clock Input. Positive-edge clocks data in and negative-edge clocks data out. Up to 1 MHz above 2.5 V VCC, 400 kHz down to 1.7 V VCC. Input capacitance 6 pF (typ).
7 WP input Write Control (Write Protect). Tie to VCC to inhibit all write operations to the memory array; tie to GND to allow normal writes. Internally pulled down to GND if left floating (writes enabled by default).
8 VCC power_in Positive supply voltage, 1.7 V to 5.5 V. Standby current 1 uA typ at 3.3 V; read current 1 mA max; write current 2 mA max. Absolute maximum 6.25 V.

Key specifications

Parameter Value
Manufacturer lingxingic
Package SOP-8
Category Memory
Pins 8

Ordering variants

  • 24C16(LX) SOP8
  • 24C16(LX) DIP8
  • 24C16(LX) TSSOP8

CAD (KiCad official)

  • Symbol: 24C16
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: 24c16-etched.step / 24c16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24c16.step / 24c16.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: lingxingic datasheet (17 pp, sha256 55d33bfa5bea0045, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF