component
24C08BN
Public Made by Adomby adom
XBLW EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+267−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/24c08bn-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+265@@ -0,0 +1,265 @@+{+ "schema": "adom.pads/1",+ "slug": "24c08bn",+ "footprint": "SOIC-8_3.9x4.9mm_P1.27mm",+ "generated_from": {+ "footprint": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.475,+ -1.905+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4"+ },+ "pad_count": 8,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ -1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Not internally bonded; leave floating or tie to GND.",+ "is_pin1": true,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ -0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Not internally bonded; leave floating or tie to GND.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ 0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "A2",+ "type": "input",+ "description": "Device address input (chip select). Hard-wire to VCC or GND to set the 5th bit of the 7-bit I2C device address, allowing up to two 24C08 devices on the same bus. Recommend a known state via <=10 kOhm pull-up/pull-down; internally recognized as VIL if left floating.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.475,+ 1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V) for the device.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ 1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Serial data line for the 2-wire I2C bus. Open-drain output that can be wire-OR'd with other open-drain devices; requires an external pull-up resistor to VCC.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ 0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "SCL",+ "type": "input",+ "description": "Serial clock input. Rising edge latches data into the EEPROM; falling edge clocks data out. Supports 1 MHz (2.5-5V) / 400 kHz (1.8V) operation.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "7",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ -0.635+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "7",+ "name": "WP",+ "type": "input",+ "description": "Write Protect. Tie to VCC (VIH) to inhibit all program/erase operations to the array; tie to GND (VIL) or leave floating to allow writes. Read operations are unaffected. Recommend a known state via <=10 kOhm pull-up/pull-down.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "8",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.475,+ -1.905+ ],+ "rot": 0.0,+ "size": [+ 1.95,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage, 1.8 V to 5.5 V. Standby current <1 uA. Decouple with a 100 nF capacitor to GND close to the pin.",+ "is_pin1": false,+ "source": {+ "geometry": "SOIC-8_3.9x4.9mm_P1.27mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}