main
History Download
Ray Publish 0.1.0 0db21ef

24AA16T-E

Microchip Tech · EEPROM · SOT-23-5

24AA16T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input Serial clock input used to synchronize data transfer to and from the device.
2 VSS power_in Ground reference for the device; WP must be tied to VSS or VCC.
3 SDA bidirectional Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz).
4 VCC power_in Power supply, 1.7V to 5.5V for the 24AA16 variant.
5 WP input Write-protect input: tied to VSS enables normal read/write of the full memory, tied to VCC inhibits write operations while reads are unaffected.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Memory
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-Level Input Voltage VIH 0.7 VCC 3
Low-Level Input Voltage VIL 0.3 VCC 3
Hysteresis of Schmitt Trigger Inputs VHYS 0.05 VCC Note 1 3
Low-Level Output Voltage VOL 0.4 V IOL = 3.0 mA, VCC = 2.5V 3
Input Leakage Current ILI -1 1 µA VIN = VSS or VCC 3
Output Leakage Current ILO -1 1 µA VOUT = VSS or VCC 3
Pin Capacitance (all inputs/outputs) CIN, COUT 10 pF VCC = 5.0V (Note 1), TA = 25°C, FCLK = 1 MHz 3
Operating Current (write) ICCWRITE 3 mA VCC = 5.5V, SCL = 400 kHz 3
Operating Current (read) ICCREAD 1 mA VCC = 5.5V, SCL = 400 kHz 3
Standby Current (I-Temp.) ICCS 1 µA SDA = SCL = VCC, WP = VSS, I-Temp. 3
Clock Frequency (VCC 2.5V to 5.5V) FCLK 400 kHz 2.5V ≤ VCC ≤ 5.5V 4
Clock Frequency (24AA16, VCC 1.7V to 2.5V) FCLK 100 kHz 1.7V ≤ VCC < 2.5V (24AA16) 4
Clock High Time THIGH 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Clock High Time (24AA16) THIGH 4000 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
Clock Low Time TLOW 1300 ns 2.5V ≤ VCC ≤ 5.5V 4
Clock Low Time (24AA16) TLOW 4700 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
SDA and SCL Rise Time TR 300 ns 2.5V ≤ VCC ≤ 5.5V (Note 1) 4
SDA and SCL Rise Time (24AA16) TR 1000 ns 1.7V ≤ VCC < 2.5V (24AA16) (Note 1) 4
SDA and SCL Fall Time TF 300 ns Note 1 4
Start Condition Hold Time THD:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Start Condition Hold Time (24AA16) THD:STA 4000 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
Start Condition Setup Time TSU:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Start Condition Setup Time (24AA16) TSU:STA 4700 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
Data Input Hold Time THD:DAT 0 ns Note 2 4
Data Input Setup Time TSU:DAT 100 ns 2.5V ≤ VCC ≤ 5.5V 4
Data Input Setup Time (24AA16) TSU:DAT 250 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
Stop Condition Setup Time TSU:STO 600 ns 2.5V ≤ VCC ≤ 5.5V 4
Stop Condition Setup Time (24AA16) TSU:STO 4000 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
Output Valid from Clock TAA 900 ns 2.5V ≤ VCC ≤ 5.5V (Note 2) 4
Output Valid from Clock (24AA16) TAA 3500 ns 1.7V ≤ VCC < 2.5V (24AA16) (Note 2) 4
Bus Free Time TBUF 1300 ns 2.5V ≤ VCC ≤ 5.5V 4
Bus Free Time (24AA16) TBUF 4700 ns 1.7V ≤ VCC < 2.5V (24AA16) 4
Output Fall Time from VIH Minimum to VIL Maximum TOF 250 ns 2.5V ≤ VCC ≤ 5.5V (Notes 1, 3 and 4) 5
Input Filter Spike Suppression (SDA and SCL pins) TSP 50 ns Note 1 5
Write Cycle Time (byte or page) TWC 5 ms 5
Endurance 1e+06 cycles +25°C, 5.5V, Page Mode (Note 4) 5
All inputs and outputs w.r.t. VSS -0.3 V w.r.t. VSS; upper limit printed as VCC + 1.0V 3
Storage temperature -65 150 °C 3
Ambient temperature with power applied -40 125 °C 3
ESD protection on all pins 4 kV 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 26

CAD (KiCad official)

  • Symbol: 24AA16T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: 24aa16t-e-etched.step / 24aa16t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24aa16t-e.step / 24aa16t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (49 pp, sha256 00300b5fbb858585, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF