Generated by kicad-footprint-generator · KiCad file format 20260206
24AA08T-I
Microchip Tech · EEPROM · SOT-23-5
24AA08T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | The SCL input synchronizes data transfer to and from the device and is driven by the bus master. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | SDA | bidirectional | Open-drain serial address/data pin that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz), and changes only while SCL is low except for Start/Stop conditions. |
| 4 | VCC | power_in | Power supply, +1.7V to 5.5V for the 24AA08. |
| 5 | WP | input | Write-protect input that must be tied to VSS (normal read/write of the full memory) or VCC (all write operations inhibited, reads unaffected); the Chip Scale package does not support this feature. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Memory |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-level output voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 2 | ||
| Input leakage current | ILI | -1 | 1 | µA | VIN = .1V to VCC | 2 | |
| Output leakage current | ILO | -1 | 1 | µA | VOUT = .1V to VCC | 2 | |
| Pin capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz | 2 | ||
| Operating current (write) | ICC write | 0.1 | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 2 | |
| Operating current (read) | ICC read | 0.05 | 1 | mA | 2 | ||
| Standby current (Industrial) | ICCS | 0.01 | 1 | µA | Industrial; SDA = SCL = VCC; WP = VSS | 2 | |
| Clock frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Clock frequency | FCLK | 100 | kHz | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Clock high time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Clock high time | THIGH | 4000 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Clock low time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Clock low time | TLOW | 4700 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| SDA and SCL rise time (Note 1) | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| SDA and SCL rise time (Note 1) | TR | 1000 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| SDA and SCL fall time (Note 1) | TF | 300 | ns | 3 | |||
| Start condition hold time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Start condition hold time | THD:STA | 4000 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Start condition setup time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Start condition setup time | TSU:STA | 4700 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Data input hold time (Note 2) | THD:DAT | 0 | ns | 3 | |||
| Data input setup time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Data input setup time | TSU:DAT | 250 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Stop condition setup time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Stop condition setup time | TSU:STO | 4000 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Output valid from clock (Note 2) | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Output valid from clock (Note 2) | TAA | 3500 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Bus free time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Bus free time | TBUF | 4700 | ns | 1.7V ≤ VCC ≤ 2.5V (24AA08) | 3 | ||
| Output fall time from VIH minimum to VIL maximum | TOF | 250 | ns | 2.5V ≤ VCC ≤ 5.5V | 3 | ||
| Input filter spike suppression (SDA and SCL pins) (Notes 1 and 3) | TSP | 50 | ns | 3 | |||
| Write cycle time (byte or page) | TWC | 5 | ms | 3 | |||
| All inputs and outputs w.r.t. VSS (upper limit VCC +1.0V) | -0.3 | V | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 2 | |||
| Supply voltage VCC (operating range) | VCC | 1.7 | 5.5 | V | 2 | ||
| Ambient temperature (Industrial) | TA | -40 | 85 | °C | Industrial (I) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package: P = Plastic DIP (300 mil body), 8-lead SN = Plastic SOIC (3.90 mm body), 8-lead | 37 |
CAD (KiCad official)
- Symbol:
24AA08T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
24aa08t-i-etched.step/24aa08t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24aa08t-i.step/24aa08t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (40 pp, sha256
c46545d6231845c1, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).