Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

24AA08HT-I

Microchip Tech · EEPROM · SOT-23-5

24AA08HT-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input Serial clock input used to synchronize data transfer to and from the device.
2 VSS power_in Ground.
3 SDA bidirectional Serial address/data I/O; open-drain, requires a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz).
4 VCC power_in +1.7V to 5.5V power supply.
5 WP input Write-protect input that must be tied to VSS (full array writable) or VCC (inhibits writes to upper half 200h-3FFh).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Memory
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature -65 150 °C 2
Ambient temperature with power applied -40 125 °C 2
ESD protection on all pins 4 kV 2
Supply voltage range VCC 1.7 5.5 V 24AA08H 2
Operating temperature, Industrial TA -40 85 °C Industrial (I) 2
High-level input voltage VIH 0.7 VCC WP, SCL and SDA pins 2
Low-level input voltage VIL 0.3 VCC WP, SCL and SDA pins 2
Hysteresis of Schmitt Trigger inputs VHYS 0.05 VCC Note 2
Low-level output voltage VOL 0.4 V IOL = 3.0 mA, VCC = 2.5V 2
Input leakage current ILI -1 1 µA VIN = VSS or VCC 2
Output leakage current ILO -1 1 µA VOUT = VSS or VCC 2
Pin capacitance (all inputs/outputs) CIN, COUT 10 pF VCC = 5.0V (Note), TA = 25°C, FCLK = 1 MHz 2
Operating current, write ICC write 0.1 3 mA VCC = 5.5V, SCL = 400 kHz 2
Operating current, read ICC read 0.05 1 mA 2
Standby current, Industrial ICCS 0.01 1 µA Industrial, SDA = SCL = VCC, WP = VSS 2
Clock frequency FCLK 400 kHz 2.5V ≤ VCC ≤ 5.5V 3
Clock frequency FCLK 100 kHz 1.7V ≤ VCC < 2.5V (24AA08H) 3
Clock high time THIGH 600 ns 2.5V ≤ VCC ≤ 5.5V 3
Clock high time THIGH 4000 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
Clock low time TLOW 1300 ns 2.5V ≤ VCC ≤ 5.5V 3
Clock low time TLOW 4700 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
SDA and SCL rise time TR 300 ns 2.5V ≤ VCC ≤ 5.5V (Note 1) 3
SDA and SCL rise time TR 1000 ns 1.7V ≤ VCC < 2.5V (24AA08H) (Note 1) 3
SDA and SCL fall time TF 300 ns Note 1 3
Start condition hold time THD:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 3
Start condition hold time THD:STA 4000 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
Start condition setup time TSU:STA 600 ns 2.5V ≤ VCC ≤ 5.5V 3
Start condition setup time TSU:STA 4700 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
Data input hold time THD:DAT 0 ns Note 2 3
Data input setup time TSU:DAT 100 ns 2.5V ≤ VCC ≤ 5.5V 3
Data input setup time TSU:DAT 250 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
Stop condition setup time TSU:STO 600 ns 2.5V ≤ VCC ≤ 5.5V 3
Stop condition setup time TSU:STO 4000 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
WP setup time TSU:WP 600 ns 2.5V ≤ VCC ≤ 5.5V 3
WP setup time TSU:WP 4000 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
WP hold time THD:WP 1300 ns 2.5V ≤ VCC ≤ 5.5V 3
WP hold time THD:WP 4700 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
Output valid from clock TAA 900 ns 2.5V ≤ VCC ≤ 5.5V (Note 2) 3
Output valid from clock TAA 3500 ns 1.7V ≤ VCC < 2.5V (24AA08H) (Note 2) 3
Bus free time TBUF 1300 ns 2.5V ≤ VCC ≤ 5.5V 3
Bus free time TBUF 4700 ns 1.7V ≤ VCC < 2.5V (24AA08H) 3
Output fall time from VIH min to VIL max TOF 250 ns 2.5V ≤ VCC ≤ 5.5V 3
Input filter spike suppression (SDA and SCL) TSP 50 ns Notes 1 and 3 3
Write cycle time (byte or page) TWC 5 ms 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Package: P = Plastic DIP (300 mil body), 8-lead SN = Plastic SOIC (3.90 mm body), 8-lead 29

CAD (KiCad official)

  • Symbol: 24AA08HT-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: 24aa08ht-i-etched.step / 24aa08ht-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24aa08ht-i.step / 24aa08ht-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 eaa2b5b106174f2a, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF