component
24AA025E48T-I
Public Made by Adomby adom
Microchip Tech EEPROM, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown24AA025E48T-I
Microchip Tech · EEPROM · SOT-23-6
24AA025E48T-I from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input that synchronizes data transfer to and from the device, with 400 kHz maximum clock (100 kHz for VCC < 2.5V). |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | SDA | bidirectional | Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz), and may change only while SCL is low for normal data transfer. |
| 4 | A1 | input | Chip address input compared with the corresponding slave address bit, which must be connected to either VSS or VCC. |
| 5 | A0 | input | Chip address input compared with the corresponding slave address bit, which must be connected to either VSS or VCC. |
| 6 | VCC | power_in | Power supply, +1.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Memory |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-Level Input Voltage | VIH | 0.7 | VCC | 3 | |||
| Low-Level Input Voltage | VIL | 0.3 | VCC | 3 | |||
| Hysteresis of Schmitt Trigger Inputs | VHYS | 0.05 | VCC | Note | 3 | ||
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 3.0 mA, VCC = 2.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (all inputs/outputs) | CIN, COUT | 10 | pF | VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz | 3 | ||
| Operating Current (write) | ICCWRITE | 0.1 | 3 | mA | VCC = 5.5V, SCL = 400 kHz | 3 | |
| Operating Current (read) | ICCREAD | 0.05 | 1 | mA | 3 | ||
| Standby Current, Industrial (I) | ICCS | 0.01 | 1 | µA | Industrial (I), SDA = SCL = VCC | 3 | |
| Clock Frequency | FCLK | 400 | kHz | 2.5V VCC 5.5V | 4 | ||
| Clock Frequency | FCLK | 100 | kHz | 1.7V VCC 2.5V | 4 | ||
| Clock High Time | THIGH | 600 | ns | 2.5V VCC 5.5V | 4 | ||
| Clock High Time | THIGH | 4000 | ns | 1.7V VCC 2.5V | 4 | ||
| Clock Low Time | TLOW | 1300 | ns | 2.5V VCC 5.5V | 4 | ||
| Clock Low Time | TLOW | 4700 | ns | 1.7V VCC 2.5V | 4 | ||
| SDA and SCL Rise Time | TR | 300 | ns | 2.5V VCC 5.5V (Note 1) | 4 | ||
| SDA and SCL Rise Time | TR | 1000 | ns | 1.7V VCC 2.5V (Note 1) | 4 | ||
| SDA and SCL Fall Time | TF | 300 | ns | Note 1 | 4 | ||
| Start Condition Hold Time | THD:STA | 600 | ns | 2.5V VCC 5.5V | 4 | ||
| Start Condition Hold Time | THD:STA | 4000 | ns | 1.7V VCC 2.5V | 4 | ||
| Start Condition Setup Time | TSU:STA | 600 | ns | 2.5V VCC 5.5V | 4 | ||
| Start Condition Setup Time | TSU:STA | 4700 | ns | 1.7V VCC 2.5V | 4 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 2 | 4 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | 2.5V VCC 5.5V | 4 | ||
| Data Input Setup Time | TSU:DAT | 250 | ns | 1.7V VCC 2.5V | 4 | ||
| Stop Condition Setup Time | TSU:STO | 600 | ns | 2.5V VCC 5.5V | 4 | ||
| Stop Condition Setup Time | TSU:STO | 4000 | ns | 1.7V VCC 2.5V | 4 | ||
| Output Valid from Clock | TAA | 900 | ns | 2.5V VCC 5.5V (Note 2) | 4 | ||
| Output Valid from Clock | TAA | 3500 | ns | 1.7V VCC 2.5V (Note 2) | 4 | ||
| Bus Free Time | TBUF | 1300 | ns | 2.5V VCC 5.5V | 4 | ||
| Bus Free Time | TBUF | 4700 | ns | 1.7V VCC 2.5V | 4 | ||
| Output Fall Time from VIH Minimum to VIL Maximum | TOF | 250 | ns | 2.5V VCC 5.5V | 4 | ||
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | 50 | ns | Notes 1 and 3 | 4 | ||
| Write Cycle Time (byte or page) | TWC | 5 | ms | 4 | |||
| Endurance | Endurance | 1 | M cycles | 25°C (Note 4) | 4 | ||
| All inputs and outputs w.r.t. VSS | -0.3 | 1 | V | Maximum printed as VCC +1.0V | 3 | ||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| Supply voltage (operating range) | VCC | 1.7 | 5.5 | V | Industrial (I) and Automotive (E) DC characteristics | 3 | |
| Ambient temperature, Industrial (I) | TA | -40 | 85 | °C | Industrial (I), VCC = 1.7V to 5.5V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package: SN = Plastic SOIC (3.90 mm body), 8-lead OT = SOT-23 (Tape and Reel only) | 29 |
CAD (KiCad official)
- Symbol:
24AA025E48T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
24aa025e48t-i-etched.step/24aa025e48t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24aa025e48t-i.step/24aa025e48t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
f846efffb9da99ee, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).