component

2060-452/998-404

Public Made by Adom

WAGO SMD PCB terminal block, push-button, 2-pole, 4 mm pitch, SMD,P=4mm. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

Verified 2060-452/998-404

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match

SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against WAGO's 2060-452/998-404 data sheet (Version 23.10.2026)files match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: replaced the page's copy (Version 06.10.2026, sha256 b37d246c...; no technical content changed between the editions) with WAGO's current data sheet, Version 23.10.2026, 7 pages, fetched 2026-10-27 from wago.priintcloud.com (the datasheet service wago.com links to)
•Contacts: 2 poles, 2 SMD solder pins per potential, solder pins in-line (p.3); the page's 4 pads 1_1/1_2 (pole 1) and 2_1/2_2 (pole 2) match. WAGO prints no pole numbering, so poles are numbered along the footprint; names 1/2 unchanged, all pins passive
✓Pin descriptions rewritten from the land pattern (p.2) and the PCB contact data (p.3); the old 'Contact N' text cited only the symbol
✓Footprint vs WAGO recommended land pattern (p.2): pole pitch 4 mm (pads at y = -2/+2), long pad 6 x 2 mm centred at x = -4, short pad 3.5 x 2 mm centred at x = +5.25, overall pad span 14 mm (-7..+7); every number matches
✓3D body 13.1 x 7.9 x 4.5 mm vs drawing depth 13.1 (12.7 housing + 0.4 lead overhang), width L = 2 x 4 - 0.1 = 7.9, height 4.5 (p.2 and Physical data p.3); housing x -6.5..6.2, rear lead tip at 6.6, 0.4 inside the 7.0 pad edge as drawn; leads sit on the pads; Z-up, seated on z = 0
✓DigiKey 2946-2060-452/998-404TR-ND (tape and reel) and Mouser 1089-2060452/998-404 kept (WAGO, this item number)
✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify: all checks pass

Evidencedata sheet (WAGO, Version 23.10.2026)product page (WAGO)

Verified files✓ 2060-452-998-404.kicad_sym✓ 2060-452-998-404.kicad_mod✓ 2060-452-998-404.step

9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: P1, P2superseded

reviewfor all variants

•Datasheet pins not matched to a symbol pin: P1, P2

9 Oct 2026Claude (AI build)The schematic writes the MPN as 2060-452_998-404; the WAGO item number is 2060-452/998-404...superseded

reviewfor all variants

•The schematic writes the MPN as 2060-452_998-404; the WAGO item number is 2060-452/998-404.

9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
✓4 of 4 pins described from the datasheet (adom-ds2sf, page-cited)
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Evidencedatasheet

Verified files! 2060-452-998-404.kicad_sym! 2060-452-998-404.kicad_mod✓ 2060-452-998-404.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.